References
- Amanov, A., Pyun, Y.-S., Kim, J.-H., and Sasaki, S. (2014), “Enhancement in Wear Resistance of Sintered Silicon Carbide at Various Temperatures,” Tribology International, 74, pp 28–37.
- Zhao, G., Wang, T., and Wang, Q. (2011), “Surface Modification of Carbon Fiber and Its Effects on the Mechanical and Tribological Properties of the Polyurethane Composites,” Polymer Composites, 32(11), pp 1726–1733.
- Podgornik, B., Vilhena, L. M., Sedlaček, M., Rek, Z., and Žun, I. (2012), “Effectiveness and Design of Surface Texturing for Different Lubrication Regimes,” Meccanica, 47(7), pp 1613–1622.
- Podgornik, B. and Sedlacek, M. (2012), “Performance, Characterization and Design of Textured Surfaces,” Journal of Tribology, 134(4), p 041701.
- Kovalchenko, A., Ajayi, O., Erdemir, A., and Fenske, G. (2011), “Friction and Wear Behavior of Laser Textured Surface under Lubricated Initial Point Contact,” Wear, 271(9–10), pp 1719–1725.
- Etsion, I. (2005), “State of the Art in Laser Surface Texturing,” Journal of Tribology, 127(1), pp 248–253.
- Zhang, D.-y., Luo, Y.-h., Li, X., and Chen, H.-w. (2011), “Numerical Simulation and Experimental Study of Drag-Reducing Surface of a Real Shark Skin,” Journal of Hydrodynamics, 23(2), pp 204–211.
- Singh, R. A. and Yoon, E.-S. (2008), “Biomimetics in Tribology—Recent Developments,” Journal of the Korean Physical Society, 52(3), pp 656–658.
- Antoszewski, B. (2012), “The Effect of Laser Surface Texturing on Frictional Performance of Sliding Pair,” Scientific Journals, 31(103), pp 14–18.
- Braun, D., Greiner, C., Schneider, J., and Gumbsch, P. (2014), “Efficiency of Laser Surface Texturing in the Reduction of Friction under Mixed Lubrication,” Tribology International, 77, pp 142–147.
- Vilhena, L. M., Podgornik, B., Vižintin, J., and Možina, J. (2011), “Influence of Texturing Parameters and Contact Conditions on Tribological Behaviour of Laser Textured Surfaces,” Meccanica, 46(3), pp 567–575.
- Yan, D., Qu, N., Li, H., and Wang, X. (2010), “Significance of Dimple Parameters on the Friction of Sliding Surfaces Investigated by Orthogonal Experiments,” Tribology Transactions, 53(5), pp 703–712.
- Etsion, I. (2001), “A Laser Surface Textured Hydrostatic Mechanical Seal,” Tribology Transactions, 45(3), pp. 430–434.
- Etsion, I. (2002), “Improving Tribological Performance of Mechanical Components by Laser Surface Texturing,” Tribology Letters, 17(4), pp 733–737.
- Wang, X., Kato, K., Adachi, K., and Aizawa, K. (2003), “Loads Carrying Capacity Map for the Surface Texture Design of SiC Thrust Bearing Sliding in Water,” Tribology International, 36(3), pp 189–197.
- Tripathi, K., Joshi, B., Gyawali, G., Amanov, A., and Lee, S. W. (2015), “A Study on the Effect of Laser Surface Texturing on Friction and Wear Behavior of Graphite Cast Iron,” Journal of Tribology, 138(1), p 011601.
- Zhang, K. Y., Pyoun, Y. S., Cao, X. J., Wu, B., and Murakami, R. (2012), “Fatigue Properties of SUS304 Stainless Steel after Ultrasonic Nanocrystal Surface Modification (UNSM),” International Journal of Modern Physics Conference Series, 6, pp 330–335.
- Amanov, A., Kim, J.-H., Pyun, Y.-S., Hirayama, T., and Hino, M. (2015), “Wear Mechanisms of Silicon Carbide Subjected to Ultrasonic Nanocrystalline Surface Modification Technique,” Wear, 332–333, pp 891–899.
- Amanov, A., Cho, I. S., Pyoun, Y. S., Lee, C. S., and Park, I. G. (2012), “Micro-Dimpled Surface by Ultrasonic Nanocrystal Surface Modification and Its Tribological Effects,” Wear, 286–287, pp 136–144.
- Wu, B., Wang, P., Pyoun, Y.-S., Zhang, J., and Murakami, R.-i. (2012), “Effect of Ultrasonic Nanocrystal Surface Modification on the Fatigue Behaviors of Plasma-Nitrided S45C Steel,” Surface and Coatings Technology, 213, pp 271–277.
- Wu, B., Wang, P., Pyoun, Y.-S., Zhang, J., and Murakami, R.-i. (2013), “Study on the Fatigue Properties of Plasma Nitriding S45C with a Pre-Ultrasonic Nanocrystal Surface Modification Process,” Surface and Coatings Technology, 216, pp 191–198.
- Amanov, A., Sasaki, S., Kim, D. E., Penkov, O. V., and Pyun, Y. S. (2013), “Improvement of the Tribological Properties of Al6061-T6 Alloy under Dry Sliding Conditions,” Tribology International, 64, pp 24–32.
- Amanov, A., Cho, I.-S., Kim, D.-E., and Pyun, Y.-S. (2012), “Fretting Wear and Friction Reduction of CP Titanium and Ti-6Al-4V Alloy by Ultrasonic Nanocrystalline Surface Modification,” Surface and Coatings Technology, 207, pp 135–142.
- Amanov, A., Penkov, O. V., Pyun, Y.-S., and Kim, D.-E. (2012), “Effects of Ultrasonic Nanocrystalline Surface Modification on the Tribological Properties of AZ91D Magnesium Alloy,” Tribology International, 54, pp 106–113.
- Amanov, A., Watabe, T., Tsuboi, R., and Sasaki, S. (2013), “Improvement in the Tribological Characteristics of Si-DLC Coating by Laser Surface Texturing under Oil-Lubricated Point Contacts at Various Temperatures,” Surface and Coatings Technology, 232, pp 549–560.
- Chouquet, C., Gavillet, J., Ducros, C., and Sanchette, F. (2010), “Effect of DLC Surface Texturing on Friction and Wear during Lubricated Sliding,” Materials Chemistry and Physics, 123(2–3), pp 367–371.
- Borghi, A., Gualtieri, E., Marchetto, D., Moretti, L., and Valeri, S. (2008), “Tribological Effects of Surface Texturing on Nitriding Steel for High-Performance Engine Applications,” Wear, 265(7–8), pp 1046–1051.
- Gyawali, G., Joshi, B., Tripathi, K., Kim, S. H., and Wohn Lee, S. (2015), “Effect of Microtexturing on Tribological Performance of Ni/Ni-SiC Composite Coatings,” Surface Engineering, 31(9), pp 701–707.
- Amanov, A. K. J., Pyun, Y. S., Tripathi, K., Lee, S. W., Lee, H. R., and Kim, T. H. (2015), “A Feasibility Study on Hybrid Use of Thermal Spray Coating and Ultrasonic Nanocrystalline Surface Modification,” Thermal Spray: Proceedings of the International Thermal Spray Conference, 11–14 May, Long Beach, California, USA, pp. 774–782.
- Buckley, D. H. (1977), “Effect of Carbon Content on Friction and Wear of Cast Irons,” NASA Technical Paper 1052.
- Cherif, A., Pyoun, Y., and Scholtes, B. (2009), “Effects of Ultrasonic Nanocrystal Surface Modification (UNSM) on Residual Stress State and Fatigue Strength of AISI 304,” Journal of Materials Engineering and Performance, 19(2), pp 282–286.
- Grosdidier, T., Zou, J. X., Stein, N., Boulanger, C., Hao, S. Z., and Dong, C. (2008), “Texture Modification, Grain Refinement and Improved Hardness/Corrosion Balance of a FeAl Alloy by Pulsed Electron Beam Surface Treatment in the ‘Heating Mode,’,” Scripta Materialia, 58(12), pp 1058–1061.
- Amanov, A., Watabe, T., and Sasaki, S. (2013), “The Influence of Micro-Scale Dimples and Nano-Sized Grains on the Fretting Characteristics Generated by Laser Pulses,” Journal of Nanoscience and Nanotechnology, 13(12), pp 8176–8183.
- Zhang, Y. S., Han, Z., Wang, K., and Lu, K. (2006), “Friction and Wear Behaviors of Nanocrystalline Surface Layer of Pure Copper,” Wear, 260(9–10), pp 942–948.
- Choudhury, D., Urban, F., Vrbka, M., Hartl, M., and Krupka, I. (2015), “A Novel Tribological Study on DLC-Coated Micro-Dimpled Orthopedics Implant Interface,” Journal of the Mechanical Behavior of Biomedical Materials, 45, pp 121–131.
- Rigney, D. A. (2000), “Transfer, Mixing and Associated Chemical and Mechanical Processes during the Sliding of Ductile Materials,” Wear, 245, pp 1–9.
- Hsu, S. M., Munro, R. G., Shen, M. C., and Gates, R. S. (2005), “Wear—Materials, Mechanisms and Practice,” Boundary Lubricated Wear, pp 37–70, John Wiley & Sons Ltd, Chichester, England.
- Gangasani, P. R. (2003), “Friction and Wear Characteristics of Ductile Iron in Dry Sliding Conditions,” Keith Millis Symposium on Ductile Cast Iron, 20–23 October, Hilton Head Island, SOuth Carolina.
- Mishra, R., Basu, B., and Balasubramaniam, R. (2004), “Effect of Grain Size on the Tribological Behavior of Nanocrystalline Nickel,” Materials Science & Engineering A, 373(1–2), pp 370–373.
- Jeong, D. H., Gonzalez, F., Palumbo, G., Aust, K. T., and Erb, U. (2001), “The Effect of Grain Size on the Wear Properties of Electrodeposited Nanocrystalline Nickel Coatings,” Scripta Materialia, 44(3), pp 493–499.