Synergy Effect of Ultrasonic Nanocrystalline Surface Modification and Laser Surface Texturing on Friction and Wear Behavior of Graphite Cast Iron

References

• Amanov, A., Pyun, Y.-S., Kim, J.-H., and Sasaki, S. (2014), “Enhancement in Wear Resistance of Sintered Silicon Carbide at Various Temperatures,” Tribology International, 74, pp 28–37.
   Web of Science ®Google Scholar
• Zhao, G., Wang, T., and Wang, Q. (2011), “Surface Modification of Carbon Fiber and Its Effects on the Mechanical and Tribological Properties of the Polyurethane Composites,” Polymer Composites, 32(11), pp 1726–1733.
   Web of Science ®Google Scholar
• Podgornik, B., Vilhena, L. M., Sedlaček, M., Rek, Z., and Žun, I. (2012), “Effectiveness and Design of Surface Texturing for Different Lubrication Regimes,” Meccanica, 47(7), pp 1613–1622.
   Web of Science ®Google Scholar
• Podgornik, B. and Sedlacek, M. (2012), “Performance, Characterization and Design of Textured Surfaces,” Journal of Tribology, 134(4), p 041701.
   Google Scholar
• Kovalchenko, A., Ajayi, O., Erdemir, A., and Fenske, G. (2011), “Friction and Wear Behavior of Laser Textured Surface under Lubricated Initial Point Contact,” Wear, 271(9–10), pp 1719–1725.
   Web of Science ®Google Scholar
• Etsion, I. (2005), “State of the Art in Laser Surface Texturing,” Journal of Tribology, 127(1), pp 248–253.
   Google Scholar
• Zhang, D.-y., Luo, Y.-h., Li, X., and Chen, H.-w. (2011), “Numerical Simulation and Experimental Study of Drag-Reducing Surface of a Real Shark Skin,” Journal of Hydrodynamics, 23(2), pp 204–211.
   Web of Science ®Google Scholar
• Singh, R. A. and Yoon, E.-S. (2008), “Biomimetics in Tribology—Recent Developments,” Journal of the Korean Physical Society, 52(3), pp 656–658.
   Google Scholar
• Antoszewski, B. (2012), “The Effect of Laser Surface Texturing on Frictional Performance of Sliding Pair,” Scientific Journals, 31(103), pp 14–18.
   Google Scholar
• Braun, D., Greiner, C., Schneider, J., and Gumbsch, P. (2014), “Efficiency of Laser Surface Texturing in the Reduction of Friction under Mixed Lubrication,” Tribology International, 77, pp 142–147.
   Web of Science ®Google Scholar
• Vilhena, L. M., Podgornik, B., Vižintin, J., and Možina, J. (2011), “Influence of Texturing Parameters and Contact Conditions on Tribological Behaviour of Laser Textured Surfaces,” Meccanica, 46(3), pp 567–575.
   Web of Science ®Google Scholar
• Yan, D., Qu, N., Li, H., and Wang, X. (2010), “Significance of Dimple Parameters on the Friction of Sliding Surfaces Investigated by Orthogonal Experiments,” Tribology Transactions, 53(5), pp 703–712.
   Web of Science ®Google Scholar
• Etsion, I. (2001), “A Laser Surface Textured Hydrostatic Mechanical Seal,” Tribology Transactions, 45(3), pp. 430–434.
   Web of Science ®Google Scholar
• Etsion, I. (2002), “Improving Tribological Performance of Mechanical Components by Laser Surface Texturing,” Tribology Letters, 17(4), pp 733–737.
   Google Scholar
• Wang, X., Kato, K., Adachi, K., and Aizawa, K. (2003), “Loads Carrying Capacity Map for the Surface Texture Design of SiC Thrust Bearing Sliding in Water,” Tribology International, 36(3), pp 189–197.
   Web of Science ®Google Scholar
• Tripathi, K., Joshi, B., Gyawali, G., Amanov, A., and Lee, S. W. (2015), “A Study on the Effect of Laser Surface Texturing on Friction and Wear Behavior of Graphite Cast Iron,” Journal of Tribology, 138(1), p 011601.
   Google Scholar
• Zhang, K. Y., Pyoun, Y. S., Cao, X. J., Wu, B., and Murakami, R. (2012), “Fatigue Properties of SUS304 Stainless Steel after Ultrasonic Nanocrystal Surface Modification (UNSM),” International Journal of Modern Physics Conference Series, 6, pp 330–335.
   Google Scholar
• Amanov, A., Kim, J.-H., Pyun, Y.-S., Hirayama, T., and Hino, M. (2015), “Wear Mechanisms of Silicon Carbide Subjected to Ultrasonic Nanocrystalline Surface Modification Technique,” Wear, 332–333, pp 891–899.
   Web of Science ®Google Scholar
• Amanov, A., Cho, I. S., Pyoun, Y. S., Lee, C. S., and Park, I. G. (2012), “Micro-Dimpled Surface by Ultrasonic Nanocrystal Surface Modification and Its Tribological Effects,” Wear, 286–287, pp 136–144.
   Web of Science ®Google Scholar
• Wu, B., Wang, P., Pyoun, Y.-S., Zhang, J., and Murakami, R.-i. (2012), “Effect of Ultrasonic Nanocrystal Surface Modification on the Fatigue Behaviors of Plasma-Nitrided S45C Steel,” Surface and Coatings Technology, 213, pp 271–277.
   Web of Science ®Google Scholar
• Wu, B., Wang, P., Pyoun, Y.-S., Zhang, J., and Murakami, R.-i. (2013), “Study on the Fatigue Properties of Plasma Nitriding S45C with a Pre-Ultrasonic Nanocrystal Surface Modification Process,” Surface and Coatings Technology, 216, pp 191–198.
   Web of Science ®Google Scholar
• Amanov, A., Sasaki, S., Kim, D. E., Penkov, O. V., and Pyun, Y. S. (2013), “Improvement of the Tribological Properties of Al6061-T6 Alloy under Dry Sliding Conditions,” Tribology International, 64, pp 24–32.
   Web of Science ®Google Scholar
• Amanov, A., Cho, I.-S., Kim, D.-E., and Pyun, Y.-S. (2012), “Fretting Wear and Friction Reduction of CP Titanium and Ti-6Al-4V Alloy by Ultrasonic Nanocrystalline Surface Modification,” Surface and Coatings Technology, 207, pp 135–142.
   Web of Science ®Google Scholar
• Amanov, A., Penkov, O. V., Pyun, Y.-S., and Kim, D.-E. (2012), “Effects of Ultrasonic Nanocrystalline Surface Modification on the Tribological Properties of AZ91D Magnesium Alloy,” Tribology International, 54, pp 106–113.
   Web of Science ®Google Scholar
• Amanov, A., Watabe, T., Tsuboi, R., and Sasaki, S. (2013), “Improvement in the Tribological Characteristics of Si-DLC Coating by Laser Surface Texturing under Oil-Lubricated Point Contacts at Various Temperatures,” Surface and Coatings Technology, 232, pp 549–560.
   Web of Science ®Google Scholar
• Chouquet, C., Gavillet, J., Ducros, C., and Sanchette, F. (2010), “Effect of DLC Surface Texturing on Friction and Wear during Lubricated Sliding,” Materials Chemistry and Physics, 123(2–3), pp 367–371.
   Web of Science ®Google Scholar
• Borghi, A., Gualtieri, E., Marchetto, D., Moretti, L., and Valeri, S. (2008), “Tribological Effects of Surface Texturing on Nitriding Steel for High-Performance Engine Applications,” Wear, 265(7–8), pp 1046–1051.
   Web of Science ®Google Scholar
• Gyawali, G., Joshi, B., Tripathi, K., Kim, S. H., and Wohn Lee, S. (2015), “Effect of Microtexturing on Tribological Performance of Ni/Ni-SiC Composite Coatings,” Surface Engineering, 31(9), pp 701–707.
   Web of Science ®Google Scholar
• Amanov, A. K. J., Pyun, Y. S., Tripathi, K., Lee, S. W., Lee, H. R., and Kim, T. H. (2015), “A Feasibility Study on Hybrid Use of Thermal Spray Coating and Ultrasonic Nanocrystalline Surface Modification,” Thermal Spray: Proceedings of the International Thermal Spray Conference, 11–14 May, Long Beach, California, USA, pp. 774–782.
   Google Scholar
• Buckley, D. H. (1977), “Effect of Carbon Content on Friction and Wear of Cast Irons,” NASA Technical Paper 1052.
   Google Scholar
• Cherif, A., Pyoun, Y., and Scholtes, B. (2009), “Effects of Ultrasonic Nanocrystal Surface Modification (UNSM) on Residual Stress State and Fatigue Strength of AISI 304,” Journal of Materials Engineering and Performance, 19(2), pp 282–286.
   Web of Science ®Google Scholar
• Grosdidier, T., Zou, J. X., Stein, N., Boulanger, C., Hao, S. Z., and Dong, C. (2008), “Texture Modification, Grain Refinement and Improved Hardness/Corrosion Balance of a FeAl Alloy by Pulsed Electron Beam Surface Treatment in the ‘Heating Mode,’,” Scripta Materialia, 58(12), pp 1058–1061.
   Web of Science ®Google Scholar
• Amanov, A., Watabe, T., and Sasaki, S. (2013), “The Influence of Micro-Scale Dimples and Nano-Sized Grains on the Fretting Characteristics Generated by Laser Pulses,” Journal of Nanoscience and Nanotechnology, 13(12), pp 8176–8183.
   PubMed Web of Science ®Google Scholar
• Zhang, Y. S., Han, Z., Wang, K., and Lu, K. (2006), “Friction and Wear Behaviors of Nanocrystalline Surface Layer of Pure Copper,” Wear, 260(9–10), pp 942–948.
   Web of Science ®Google Scholar
• Choudhury, D., Urban, F., Vrbka, M., Hartl, M., and Krupka, I. (2015), “A Novel Tribological Study on DLC-Coated Micro-Dimpled Orthopedics Implant Interface,” Journal of the Mechanical Behavior of Biomedical Materials, 45, pp 121–131.
   PubMed Web of Science ®Google Scholar
• Rigney, D. A. (2000), “Transfer, Mixing and Associated Chemical and Mechanical Processes during the Sliding of Ductile Materials,” Wear, 245, pp 1–9.
   Web of Science ®Google Scholar
• Hsu, S. M., Munro, R. G., Shen, M. C., and Gates, R. S. (2005), “Wear—Materials, Mechanisms and Practice,” Boundary Lubricated Wear, pp 37–70, John Wiley & Sons Ltd, Chichester, England.
   Google Scholar
• Gangasani, P. R. (2003), “Friction and Wear Characteristics of Ductile Iron in Dry Sliding Conditions,” Keith Millis Symposium on Ductile Cast Iron, 20–23 October, Hilton Head Island, SOuth Carolina.
   Google Scholar
• Mishra, R., Basu, B., and Balasubramaniam, R. (2004), “Effect of Grain Size on the Tribological Behavior of Nanocrystalline Nickel,” Materials Science & Engineering A, 373(1–2), pp 370–373.
   Web of Science ®Google Scholar
• Jeong, D. H., Gonzalez, F., Palumbo, G., Aust, K. T., and Erb, U. (2001), “The Effect of Grain Size on the Wear Properties of Electrodeposited Nanocrystalline Nickel Coatings,” Scripta Materialia, 44(3), pp 493–499.
   Google Scholar