References
- Dowson, D. and Higginson, G. R. (1977), Elastohydrodynamic Lubrication, Oxford, UK, Pergamon Press.
- Gohar, R. (2001), Elastohydrodynamics, 2nd ed., London, UK, Imperial College Press.
- Glovnea, R. P., Olver, A. V., and Spikes, H. A. (2005), “Lubrication of Rough Surfaces by a Boundary Film-Forming Viscosity Modifier Additive,” Journal of Tribology, 127, pp 223–229.
- Cann, P. M. and Lubrecht, A. A. (1999), “An Analysis of the Mechanisms of Grease Lubrication in Rolling Element Bearings,” Lubrication Science, 11, pp 227–245.
- Becher, P. (1965), Emulsions: Theory and Practice, 2nd ed., Reinhold: New York.
- Ratoi-Salagean, M. (1996), The Design of Lubricating Oil-in-Water Emulsions, Ph.D. Thesis, University of London.
- Vergne, P., Kamel, M., and Queny, M. (1997), “Behaviour of Cold-Rolling Oil in Water Emulsions: A Rheological Approach,” Journal of Tribology, 119, pp 250–258.
- Lubrecht, T., Mayuzer, D., and Cann, P. M. (2001), “Starved Elastohydrodynamic Lubrication Theory: Application to Emulsions and Greases,” Comptes rendus de l'Académie des Sciences. Série IV, Physique, Astrophysique, 2, pp 717–728.
- Mavraki, A. and Cann, P. M. (2011), “Lubricating Film Thickness Measurements with Bovine Serum,” Tribology International, 44, pp 550–556.
- NPCS Board of Consultants & Engineers. The Complete Book on Emulsifiers with Uses, Formulae and Processes, Delhi, NIIR Project Consultancy Services.
- Wan, G. T. Y., Kenny, P., and Spikes, H. A. (1984), “Elastohydrodynamic Properties of Water Based Fire-Resistant Hydraulic Fluids,” Tribology International, 17, pp 309–315.
- Kimura, Y., and Okada, K. (1989), “Lubricating Properties of Oil-in-Water Emulsions,” Tribology Transactions, 32, pp 524–532.
- Nakahara, T. M., Makino, T., and Kyogoku, K. (1988), “Observations of Liquid Droplet Behavior and Oil Film Formation in O/W Type Emulsion Lubrication,” Journal of Tribology, 110, pp 348–353.
- Zhu, D., Bireshaw, G., Clark, S. J., and Kasun, T. J. (1994), “Elastohydrodynamic Lubrication with O/W Emulsions,” Journal of Tribology, 116, pp 310–320.
- Barker, D. C., Johnston, G. J., Spikes, H. A., and Bünemann, T. (1993), “EHD Film Formation and Starvation of Oil in Water Emulsions,” Tribology Transactions, 36, pp 565–572.
- Ratoi-Salagean, M., Spikes, H. A., and Rieffe, H. L. (1997), “Optimizing Film Formation by Oil in Water Emulsions,” Tribology Transactions, 40, pp 569–578.
- Ratoi-Salagean, M., Spikes, H. A., and Hoogendoorn, R. (1997), “The Design of Lubricious Oil in Water Emulsions,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 211, pp 195–208.
- Yang, H., Schmid, S. R., Kasun, T. J., and Reich, R. A. (2004), “Elastohydrodynamic Film Thickness and Tractions for Oil-in-Water Emulsions,” Tribology Transactions, 47, pp 123–129.
- Hooke, C. J. (1980), “The Elastohydrodynamic Lubrication of Heavily-Loaded Point Contacts,” Journal of Mechanical Engineering Science, 22, pp 183–187.
- Wilson, W. R. D., Sakaguchi, Y., and Schmid, S. (1993), “A Dynamic Concentration Model of Lubrication with Oil-in-Water Emulsions,” Wear, 161, pp 207–212.
- Lo, S. W., Yang, T. C., Cian, Y. A., and Huang, K. C. (2010), “A Model for Lubrication by Oil-in-Water Emulsions,” Journal of Tribology, 132, pp 011801–1-9.
- Yang, H., Schmid, S. R., Reich, R. A., and Kasun, T. J. (2006), “Direct Observations of Emulsion Flow in Elastohydrodynamically Lubricated Contacts,” Journal of Tribology, 128(3), pp 619–623.
- Hili, J., Olver, A. V., Edwards, S., and Jacobs, L. (2010), “Experimental Investigation of Elastohydrodynamic Film Thickness Behaviour at High Speeds,” Tribology Transactions, 53, pp 658–666.
- Johnston, G. J., Wayte, R., and Spikes, H. A. (1991), “The Measurement and Study of Very Thin Lubricant Films in Concentrated Contacts,” Tribology Transactions, 34, pp 187–194.
- Reddyhoff, T., Choo, J. H., Spikes, H. A., and Glovnea, R. P. (2010), “Lubricant Flow in an Elastohydrodynamic Contact Using Fluorescence,” Tribology Letters, 38(3), pp 207–215.
- Hili, J. (2011), Film Forming and Friction Properties of Single Phase and Two Phase Lubricants in High-Speed Rolling/Sliding Contact, Ph.D. Thesis, Imperial College.
- Ma, L., Zhang, C. and Luo, J. (2011), “Investigation of the Film Formation Mechanism of Oil-in-Water (O/W) Emulsions,” Soft Matter, 7(9), pp 4207–4213.
- Hamrock, B. J. (1994), Fundamentals of Fluid Film Lubrication, McGraw Hill Inc.: New York.
- Reddyhoff, T., Spikes, H. A., and Olver, A. V. (2009), “Improved Infrared Temperature Mapping of Elastohydrodynamic Contacts,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 223, pp 1165–1177.