Advanced Friction–Wear Behavior of Organic Brake Pads Using a Newly Developed System

References

• Gediktaş, M. (1968), Experimental Determination of Friction Materials Properties, Brake Coatings, Istanbul Technical University, Machine Faculty. Istanbul University Publisher: Istanbul.
   Google Scholar
• Ohl, K. H. and Paul, H. G. (1991), Brake Linings for Road Vehicles, Development and Testing, 1st ed., Textar GmbH, AG & Co.: Berlin, Germany.
   Google Scholar
• Ludema, K. C. (1996), Friction, Wear, Lubrication, 1st ed., CRC Press: Boca Raton, FL.
   Google Scholar
• Blau, P. J. (2001), Compositions, Functions, and Testing of Friction Brake Materials and Their Additives, Metals and Ceramics Division, U.S. Department of Energy and Oak Ridge National Laboratory: Tennessee, US.
   Google Scholar
• Eriksson, M. and Jacobson, S. (2000), “Tribological Surfaces of Organic Brake Pads,” Tribology International, 33, pp 817–827.
   Web of Science ®Google Scholar
• Çiftçi, B. (2010), Investigation of the Effect of Fiber Glass in Brake Pads on the Friction Properties, Master of Science Thesis, Institute of Natural Sciences, Selçuk University: Konya, Turkey.
   Google Scholar
• Qi, S., Fu, Z., Yun, Z., Jiang, S., Zheng, X., and Lu, Y. (2014), Effects of Walnut Shells on Friction and Wear Performance of Eco-Friendly Brake Friction Composites,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 228(5), pp 511–520.
   Web of Science ®Google Scholar
• Bahari, S. A., Isa, K. H., Kassim, M. A., Mohamed, Z., and Othman, E. A. (2012), “Investigation on Hardness and Impact Resistance of Automotive Brake Pad Composed with Rice Husk Dust,” AIP Conference Proceedings, pp 155–158, American Institute of Physics: Malaysia.
   Google Scholar
• Saffar, R., Shojaei, A., and Arjmand, M. (2010), “Theoretical and Experimental Analysis of the Thermal, Fade and Wear Characteristics of Rubber-Based Composite Friction Materials,” Wear, 269, pp 145–151.
   Web of Science ®Google Scholar
• Matejka, V., Fu, Z., Kukutschova, J., Qi, S., Jiang, S., Zhang, X., Yun, R., Vaculik, M., Heliova, M., and Lu, Y. (2013), “Jute Fibers and Powderized Hazelnut Shells as Natural Fillers in Non-Asbestos Organic Non-Metallic Friction Composites,” Materials & Design, 51, pp 847–853.
   Web of Science ®Google Scholar
• Hee, K. W. and Filip, P. (2005), “Performance of Ceramic Enhanced Phenolic Matrix Brake Lining Materials for Automotive Brake Linings,” Wear, 259, pp 1088–1096.
   Web of Science ®Google Scholar
• Singh, T. (2013), Tribo-Performance Evaluation of Fibre Reinforced and Nano-Filled Composite Friction Materials, Ph.D. Thesis: NIT Hamirpur, India.
   Google Scholar
• El-Tayeb, N. S. M. and Liew, K. W. (2009), “On the Dry and Wet Sliding Performance of Potentially New Frictional Brake Pad Materials for Automotive Industry,” Wear, 266, pp 275–287.
   Web of Science ®Google Scholar
• Kim, S. S., Hwang, H. J., Shin, M. W., and Jang, H. (2011), “Friction and Vibration of Automotive Brake Pads Containing Different Abrasive Particles,” Wear, 271, pp 1194–1202.
   Web of Science ®Google Scholar
• Liew, K. W. Nirmal, U. (2013), “Frictional Performance Evaluation of Newly Designed Brake Pad Materials,” Materials & Design, 48, pp 25–33.
   Web of Science ®Google Scholar
• Satapathy, B. K. and Bijwe, J. (2005), “Fade and Recovery Behavior of Non-Asbestos Organic (NAO) Composite Friction Materials Based on Combinations of Rock Fibers and Organic Fibers,” Journal of Reinforced Plastics and Composites, 24, pp 563–576.
   Web of Science ®Google Scholar
• Kumar, M. and Bijwe, J. (2011), “Non-Asbestos Organic (NAO) Friction Composites: Role of Copper: Its Shape and Amount,” Wear, 270, pp 269–280.
   Web of Science ®Google Scholar
• Jang, H. and Kim, S. J. (2000), “The Effects of Antimony Trisulfide Sb2S3 and Zirconium Silicate ZrSiO4 in the Automotive Brake Friction Material on Friction Characteristics,” Wear, 239, pp 229–236.
   Web of Science ®Google Scholar
• Mazza, L., Trivella, A., Grassi, R., and Malucelli, G. (2015), “A Comparison of the Relative Friction and Wear Responses of PTFE and a PTFE-Based Composite When Tested Using Three Different Types of Sliding Wear Machines,” Tribology International, 90, pp 15–21.
   Web of Science ®Google Scholar
• Han, Y., Tian, X., and Yin, Y. (2008), “Effects of Ceramic Fiber on the Friction Performance of Automotive Brake Lining Materials,” Tribology Transactions, 51(6), pp 779–783.
   Web of Science ®Google Scholar
• Tulcidas, A. V., Bayon, R., Igartua, A., Bordado, C. J. M., and Silva, E. R. (2015), “Friction Reduction on the Recent Non-Releasing Biocidal Coatings by a Newly Designed Friction Test Rig,” Tribology International, 91, pp 140–150.
   Web of Science ®Google Scholar
• Sarkar, C. and Hirani, H. (2015), “Frictional Characteristics of Brake Pads Using Inertia Brake Dynamometer,” International Journal of Current Engineering and Technology, 5, pp 981–989.
   Google Scholar
• Singh, T., Patnaik, A., and Chauhan, R. (2016), “Optimization of Tribological Properties of Cement Kiln Dust–Filled Brake Pad Using Grey Relation Analysis,” Materials & Design, 89, pp 1335–1342.
   Web of Science ®Google Scholar
• Society of Automotive Engineers. (2000), J2396 Surface Vehicle Recommended Practice, Definitions and Experimental Measures Related to the Specification of Driver Visual Behavior Using Video Based Techniques, Society of Automotive Engineers: Warrendale, PA.
   Google Scholar
• Tomasek, V., Kratosova, G., Yun, R., and Yafei, R. (2009), Effects of Alumina in Non-Metallic Brake Friction Materials on Friction Performance,” Journal of Materials Science, 44, pp 266–273.
   Web of Science ®Google Scholar
• Bijwe, J. (1997), “Composites as Friction Materials: Recent Developments in Non-Asbestos Fiber Reinforced Friction Materials—A Review,” Polymer Composites, 18(3), pp 378–396.
   Web of Science ®Google Scholar
• Ademoh, N. A. and Olabisi, A. I. (2015), “Development and Evaluation of Maize Husks (Asbestos-Free) Based Brake Pad,” Development, 5(2), 67–80.
   Google Scholar
• Ma, Y., Martynková, M., Valášková, G. S., Matějka, V., and Lu, Y. (2008), “Effects of ZrSiO4 in Non-Metallic Brake Friction Materials on Friction Performance,” Tribology International, 41(3), pp 166–174.
   Web of Science ®Google Scholar
• Singh, T., Patnaik, A., Chauhan, R., and Rishiraj, A. (2017), “Assessment of Braking Performance of Lapinus–Wollastonite Fibre Reinforced Friction Composite Materials,” Journal of King Saud University - Engineering Sciences, 29, pp 183–190.
   Google Scholar
• Yun, R., Filip, P., and Lu, Y. (2010), “Performance and Evaluation of Eco-Friendly Brake Friction Materials,” Tribology International, 43(11), pp 2010–2019.
   Web of Science ®Google Scholar