Effects of Nd:YAG Laser Surface Treatment on Tribological Properties of Cold-Sprayed Ti-6Al-4V Coatings Tested against 100Cr6 Steel under Dry Condition

References

• Cizek, J. and Khor, K. A. (2012), “Role of In-Flight Temperature and Velocity of Powder Particles on Plasma Sprayed Hydroxyapatite Coating Characteristics,” Surface and Coatings Technology, 206(8–9) pp 2181–2191.
   Web of Science ®Google Scholar
• Singh, H., Sidhu, T. S., and Kalsi, S. B. S. (2012), “Cold Spray Technology: Future of Coating Deposition Processes,” Frattura ed Integrita Strutturale, 22, pp 69–84.
   Google Scholar
• Klinkov, S. V., Kosarev, V. F., and Rein, M. (2005), “Cold Spray Deposition: Significant of Particle Impact Phenomena,” Aerospace Science and Technology, 9, pp 582–591.
   Web of Science ®Google Scholar
• Assadi, H., Schmidt, T., Richter, H., Kliemann, J. O., Binder, K., Gartner, F., Klassen, T., and Kreye, H. (2011), “On Parameter Selection in Cold Spraying,” Journal of Thermal Spray Technology, 20(6), pp 1161–1176.
   Web of Science ®Google Scholar
• Khun, N. W., Tan, A. W. Y., and Liu, E. (2016), “Mechanical and Tribological Properties of Cold Sprayed Ti Coatings on Ti-6Al-4V Substrates,” Journal of Thermal Spray Technology, 25(4), pp 715–724.
   Web of Science ®Google Scholar
• Khun, N. W., Li, R. T., Loke, K., and Khor, K. A. (2015), “Effects of Al-Cr-Fe Quasicrystal Content on Tribological Properties of Cold Sprayed Titanium Composite Coatings,” Tribology Transactions, 58(4), pp 616–624.
   Web of Science ®Google Scholar
• Khun, N. W., Tan, A. W. Y., and Liu, E. (2016), “Effect of Working Pressure on Wear and Corrosion Resistance of Cold Sprayed Ti-6Al-4V Coatings,” Surface and Coatings Technology, 302, pp 1–12.
   Web of Science ®Google Scholar
• Khun, N. W., Tan, A. W. Y., Sun, W., and Liu, E. (2017), “Effect of Heat Treatment Temperature on Microstructure, and Mechanical and Tribological Properties of Cold Sprayed Ti-6Al-4V Coatings,” Tribology Transactions, 60(6), pp 1033–1042.
   Web of Science ®Google Scholar
• Khun, N. W., Li, R. T., and Khor, K. A. (2015), “Mechanical and Tribological Properties of Spark Plasma Sintered Titanium Composites Filled with Different Al-Cr-Fe Quasicrystal Content,” Tribology Transactions, 58(5), pp 859–866.
   Web of Science ®Google Scholar
• Leyens, C. and Gedanitz, H. (1999), “Long-Term Oxidation of Orthorhombic Alloy Ti-22Al-25Nb in Air between 650 and 800 °C,” Scripta Materialia, 41(8), pp 901–906.
   Web of Science ®Google Scholar
• Ralison, A., Dettemwamger, G., and Schutze, M. (2000), “Oxidation of Orthorhombic Ti2AlNb Alloys at 800 °C in Air,” Materials and Corrosion, 51(5), pp 317–328.
   Web of Science ®Google Scholar
• Pitchuka, S. B., Boesl, B., Zhang, C., Lahiri, D., Nieto, A., Sundararajan, G., and Agarwal, A. (2014), “Dry Sliding Wear Behavior of Cold Sprayed Aluminum Amorphous/Nanocrystalline Alloy Coatings,” Surface and Coatings Technology, 238, pp 118–125.
   Web of Science ®Google Scholar
• Bakshi, S. R., Wang, D., Price, T., Zhang, D., Keshri, A. K. K., Chen, Y., McCartney, D. G. and Shipway, P. H., and Agarwal, A. (2009), “Microstructure and Wear Properties of Aluminium/Aluminium–Silicon Composite Coatings Prepared by Cold Spraying,” Surface and Coatings Technology, 204, pp 503–510.
   Web of Science ®Google Scholar
• Hussain, T., McCartney, D. G., Shipway, P. H., and Marrocco, T. (2011), “Corrosion Behaviour of Cold Sprayed Titanium Coatings and Free Standing Deposits,” Journal of Thermal Spray Technology, 20(1), pp 260–274.
   Web of Science ®Google Scholar
• Adel, K. M., Dhia, A. S., and Ghazali, M. J. (2009), “The Effect of Laser Surface Hardening on the Wear and Friction Characteristics of Acicular Bainitic Ductile Iron,” International Journal of Mechanical and Materials Engineering, 4(2), pp 167–171.
   Google Scholar
• Sagaro, R., Ceballos, J. S., Blanco, A., and Mascarell, J. (1999), “Tribological Behaviour of Line Hardening of Steel U13A with Nd:YAG Laser,” Wear, 225–229, pp 575–580.
   Web of Science ®Google Scholar
• Singh, R., Kurella, A., and Dahotre, N. B. (2006), “Laser Surface Modification of Ti-6Al-4V: Wear and Corrosion Characterization in Simulated Biofluid,” Journal of Biomaterials Applications, 21(1), pp 49–73.
   PubMed Web of Science ®Google Scholar
• Matsukawa, K., Kataoka, M., and Morinushi, K. (1994), “The Effect of Pulsed Laser Annealing on Wear and Corrosion Properties of Electroless Ni-P Plating,” Tribology Transactions, 37(3), pp 573–579.
   Web of Science ®Google Scholar
• Babu, P. D., Buvanashekaran, G., and Balasubramanian, K. R. (2015), “The Elevated Temperature Wear Analysis of Laser Surface Hardened EN25 Steel Using Response Surface Methodology,” Tribology Transactions, 58(4), pp 602–615.
   Web of Science ®Google Scholar
• Indira, K., Sylvie, C., Zhongke, W., and Hongyu, Z. (2016), “Investigation of Wettability Properties of Laser Surface Modified Rare Earth Mg Alloy,” Procedia Engineering, 141, pp 63–69.
   Google Scholar
• Xue, L., Islam, M., Koul, A. K., Bibby, M., and Wallace, W. (1997), “Laser Gas Nitriding of Ti-6Al-4V Part 2: Characteristics of Nitrided Layers,” Advanced Performance Materials, 4(4), pp 389–408.
   Google Scholar
• Yibas, B. S., Akhtar, S. S., Matthews, A., Karatas, C., and Leyland, A. (2011), “Microstructure and Thermal Stress Distribution in Laser Carbon Nitriding Treatment of Ti-6Al-4V Alloy,” Journal of Manufacturing Science and Engineering, 133, pp 021013-1–8.
   Google Scholar
• Zheng, L. and T. R. Bieler. (2005), “Effects of Working, Heat Treatment, and Aging on Microstructural Evolution and Crystallographic Texture of α, α′, α″ and β Phases in Ti-6Al-4V Wire,” Materials Science and Engineering A, 392(1–2), pp 403–414.
   Web of Science ®Google Scholar
• Guo, S., Meng, Q., Zhao, X., Wei, Q., and Xu. H. (2015), “Design and Fabrication of a Metastable β-Type Titanium Alloy with Ultralow Elastic Modulus and High Strength,” Scientific Reports, 5, pp 1–8.
   Web of Science ®Google Scholar
• Khun, N. W., Frankel, G. S., and Sumption, M. (2014), “Effects of Normal Load, Sliding Speed and Surface Roughness on Tribological Properties of Niobium under Dry and Wet Conditions,” Tribology Transactions, 57(5), pp 944–954.
   Web of Science ®Google Scholar
• Khun, N. W., E. Liu, Tan A. W. Y., Senthilkumar, D., Albert, B., and Lal, D. M. (2015), “Effect of Deep Cryogenic Treatment on Mechanical and Tribological Properties of AISI D3 Tool Steel,” Friction, 3(3), pp 234–242.
   Web of Science ®Google Scholar
• Khun, N. W., Yu, H., Chong, Z. Z., Tian, P., Tian, Y., Tor. S. B., and Liu, E. (2016), “Mechanical and Tribological Properties of Zr Based Bulk Metallic Glass for Sports Application,” Materials & Design, 92, pp 667–673.
   Web of Science ®Google Scholar
• Kato, K. (2000), “Wear in Relation to Friction—A Review,” Wear, 241, pp 151–157.
   Web of Science ®Google Scholar
• Chowdhury, M. A., Khalil, M. K., Nuruzzaman, D. M., and Rahaman, M. L. (2011), “The Effect of Sliding Speed and Normal Load on Friction and Wear Property of Aluminium,” International Journal of Mechanical & Mechatronics Engineering, 11(1), pp 45–49.
   Google Scholar
• Okada, M., Liou, N. S., Prakash, V., and Miyoshi, K. (2001), “Tribology of High Speed Metal on Metal Sliding at Near Melt and Fully Melt Interfacial Temperatures,” Wear, 249, pp 672–686.
   Web of Science ®Google Scholar
• Chowdhury, M. A., Nuruzzaman, D. M., and Hannan, M. A. (2012), “Effect of Sliding Velocity and Relative Humidity on Friction Coefficient of Brass Sliding against Different Steel Counterfaces,” International Journal of Applied Engineering. Research, 2(2), pp 1425–1431.
   Google Scholar
• Qu, J., Blau, P. J., Watkins, T. R., Cavin, O. B., and Kulkarni, N. S. (2005), “Friction and Wear of Titanium Alloys Sliding against Metal, Polymer and Ceramic Counterfaces,” Wear, 258, pp 1348–1356.
   Web of Science ®Google Scholar
• Bhushan, B. (1996), Tribology and Mechanics of Magnetic Storage Device, 2nd ed., Springer-Verlag: New York.
   Google Scholar
• Khun, N. W., Trung, P. Q., and Butler, D. L. (2016), “Mechanical and Tribological Properties of Shot Peened SAE 1070 Steel,” Tribology Transactions, 59(5), pp 932–943.
   Web of Science ®Google Scholar
• Khun, N. W., Toh, W. Q., Tan, X. P., Liu, E., and Tor, S. B. (2018), “Tribological Properties of Three-Dimensionally Printed Ti-6Al-4V Material via Electron Beam Melting Process Tested against 100Cr6 without and with Hank’s Solution,” Journal of Tribology, 140(6), pp 061606.
   Web of Science ®Google Scholar
• Awrejcewicz, J. and Olejnik, P. (2007), “Occurrence of Stick–Slip Phenomenon,” Theoretical and Applied Mechanics, 45(1), pp 33–40.
   Web of Science ®Google Scholar
• Wang, J., Yan, F., and Xue, Q. (2009), “Tribological Behaviour of PTFE Sliding against Steel in Sea Water,” Wear, 267, pp 1634–1641.
   Web of Science ®Google Scholar
• Jahanmir, S., Ozmen, Y., and Ives, L. K. (2004), “Water Lubrication of Silicon Nitride in Sliding,” Tribology Letters, 17(3), pp 409–417.
   Web of Science ®Google Scholar
• Zhang, Q. Y., Zhou, Y., Wang, L., Cui, X. H., and Wang, S. Q. (2016), “Investigation on Tribolayers and Their Function of a Titanium Alloy during Dry Sliding,” Tribology International, 94, pp 541–549.
   Web of Science ®Google Scholar
• Dalili, N., Edrisy, A., Farokhzadeh, K., Li, J., Lo, J., and Riahi, A. R. (2010), “Improving the Wear Resistance of Ti-6Al-4V/TiC Composites through Thermal Oxidation,” Wear, 269, pp 590–601.
   Web of Science ®Google Scholar
• Khun, N. W., Liu, E., Yang, G. C., Ma, W. G., and Jiang, S. P. (2009), “Structure and Corrosion Behaviour of Platinum/Ruthenium/Nitrogen Doped Diamond-Like Carbon Thin Films,” Journal of Applied Physics, 106(1), pp 013506.
   Web of Science ®Google Scholar
• Korotin, D. M., Bartkowski, S., Kurmaev, E. Z., Meumann, M., Yakushina, E. B., Valiev, R. Z., and Cholakh, S. O. (2012), “Surface Characterization of Titanium Implants Treated in Hydrofluoric Acid,” Journal of Biomaterials and Nanobiotechnology, 3, pp 87–91.
   Google Scholar
• Biswas, A., Li, L., Maity, T. K., Chatterjee, U. K., Mordike, B. L., I. Manna, I., and Majumdar, J. D. (2007), “Laser Surface Treatment of Ti-6Al-4V for Bio Implant Application,” Lasers in Engineering, 17, pp 59–73.
   Web of Science ®Google Scholar
• Edson, A. F., Alexandre, F. F., Rafael, A. B., and Antonio, C. G. (2011), “Bioactive Coating on Titanium Implants Modified by Nd:YVO4 Laser,” Applied Surface Science, 257, pp 4575–4580.
   Web of Science ®Google Scholar
• Braga, F. J. C., Marques, R. F. C., Filho, E. A., and Guastaldi, A. C. (2007), “Surface Modification of Ti Dental Implants by Nd:YVO4 Laser Irradiation,” Applied Surface Science, 253, pp 9203–9208.
   Web of Science ®Google Scholar
• Bini, R. A., Santos, M. L., Filho, E. A., Marques, R. F. C., and Guastaldi, A. C. (2009), “Apatite Layerings onto Titanium Surfaces Submitted to Laser Ablation with Different Energy Densities,” Surface and Coatings Technology, 204, pp 399–403.
   Web of Science ®Google Scholar
• Borgioli, F., Galvanetto, E., Iozzelli, F., and Pradelli, G. (2005), “Improvement of Wear Resistance of Ti-6Al-4V Alloy by Means of Thermal Oxidation,” Materials Letters, 59, pp 2159–2162.
   Web of Science ®Google Scholar
• Zivic, F., Babic, M., Mitrovic, S., and Todorovic, P. (2011), “Interpretation of the Friction Coefficient during Reciprocating Sliding of Ti6Al4V Alloy against Al2O3,” Tribology in Industry, 33(1), pp 36–42.
   Google Scholar