Numerical and Experimental Analysis of the Honing Texture on the Lubrication Performance of Piston Ring–Cylinder Liner Tribosystem

References

• Richardson, D. E. (2000), “Review of Power Cylinder Friction for Diesel Engines,” Journal of Engineering for Gas Turbines and Power, 122, pp 506–519.
   Web of Science ®Google Scholar
• Qiu, Y. and Khonsari, M. M. (2011), “Performance Analysis of Full-Film Textured Surfaces with Consideration of Roughness Effects,” Journal of Tribology, 133(2), p 021704.
   Web of Science ®Google Scholar
• Wang, W. Z., Huang, Z. X., Shen, D., Kong, L. J., and Li, S. S. (2013), “The Effect of Triangle-Shaped Surface Textures on the Performance of the Lubricated Point-Contacts,” Journal of Tribology, 135(2), pp 021503.
   Web of Science ®Google Scholar
• Tomanik, E. (2013), “Modelling the Hydrodynamic Support of Cylinder Bore and Piston Rings with Laser Textured Surfaces,” Tribology International, 59, pp 90–96.
   Web of Science ®Google Scholar
• Ronen, A., Etsion, I., and Kligerman, Y. (2011), “Friction-Reducing Surface-Texturing in Reciprocating Automotive Components,” Tribology Transactions, 44(3), pp 359–366.
   Google Scholar
• Han, J., Fang, L., Sun, J. P., and Ge, S. R. (2010), “Hydrodynamic Lubrication of Microdimple Textured Surface Using Three-Dimensional CFD,” Tribology Transactions, 53, pp 860–870.
   Web of Science ®Google Scholar
• Rahmani, R., Shirvani, A., and Shirvani, H. (2007), “Optimization of Partially Textured Parallel Thrust Bearings with Square-Shaped Micro-Dimples,” Tribology Transactions, 50, pp 401–406.
   Web of Science ®Google Scholar
• Yan, D. S., Qu, N. S., Li, H. S., and Wang, S. L. (2010), “Significance of Dimple Parameters on the Friction of Sliding Surfaces Investigated by Orthogonal Experiments,” Tribology Transactions, 53, pp 703–712.
   Web of Science ®Google Scholar
• Meng, X. H., Gu, C. X., and Xie, Y. B. (2017), “Elasto-Plastic Contact of Rough Surfaces: A Mixed-Lubrication Model for the Textured Surface Analysis,” Meccanica, 52(7), pp 1541–1559.
   Web of Science ®Google Scholar
• Meng, X. H., Gu, C. X., Xie, Y. B., and Li, W. X. (2016), “A Two-Dimensional Starved Lubrication Analysis Method for Textured Surfaces,” International Journal of Engine Research, 17(10), pp 1062–1076.
   Web of Science ®Google Scholar
• Lawrence, K. D. and Ramamoorthy, B. (2016), “Multi-Surface Topography Targeted Plateau Honing for the Processing of Cylinder Liner Surfaces of Automotive Engines,” Applied Surface Science, 365, pp 19–30.
   Web of Science ®Google Scholar
• Marek, V., Maňková, I., and Durakbasa, N. M. (2017), “Effect of Honing Parameters on Generated Surface Quality of Cylinder Liner within Automotive Engine Production,” Solid State Phenomena, 261, pp 189–194.
   Google Scholar
• Bedi, T. S. and Singh, A. K. (2018), “A New Magnetorheological Finishing Process for Ferromagnetic Cylindrical Honed Surfaces,” Materials and Manufacturing Processes, 33(11), pp 1141–1149.
   Web of Science ®Google Scholar
• Zhou, Z. Y., Zhang, X. P., Lv, K. L., Li, G. Y., Wu, J., and Lu, Z. (2018), “Predicting Microscale Cross-Hatched Surface Texture in Engine Cylinder Engine,” Procedia CIRP, 71, pp 272–278.
   Google Scholar
• Tomanik, E. (1992), “Liner Honing Quality Main Characteristics,” Mobility Technology Conference and Exhibit, São Paulo, Brasil, October 13–14, Paper NO. 921453.
   Google Scholar
• Tomanik, E. (2005), “Modelling of the Asperity Contact Area on Actual 3D Surfaces,” 2005 SAE World Congress, Detroit, Michigan, USA, April 11-14, Paper NO. 2005-01-1864.
   Google Scholar
• Jocsak, J., Li, Y., Tian, T., and Wong, V. W. (2005), “Analyzing the Effects of Three-Dimensional Cylinder Liner Surface Texture on Ring-Pack Performance with a Focus on Honing Groove Cross-Hatch Angle,” Proceedings of ICEF2005, ASME Internal Combustion Engine Division 2005 Fall Technical Conference, Ottawa, Canada, September 11–14, pp. 621–632.
   Google Scholar
• Bolander, N. W. and Sadeghi, F. (2007), “Deterministic Modeling of Honed Cylinder Liner Friction,” Tribology Transactions, 50, pp 248–256.
   Web of Science ®Google Scholar
• Demirci, I., Mezghani, S., Yousfi, M., and Mansori, M. I. (2014), “Multiscale Analysis of the Roughness Effect on Lubricated Rough Contact,” Journal of Tribology, 136(1), 011501.
   Web of Science ®Google Scholar
• Bouassida, H., Biboulet, N., Sainsot, P., and Lubrecht, A. A. (2014), “Piston Ring Load Carrying Capacity: Influence of Cross-Hatching Parameters,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 228(6), pp 642–648.
   Web of Science ®Google Scholar
• Hu, Y., Meng, X. H., Xie, Y. B., and Fan, J. Z. (2017), “Study on the Frictional Performance of Slide and Plateau Honed Cylinder Liners during Running-In,” Industrial Lubrication and Tribology, 69(2), pp 282–299,
   Web of Science ®Google Scholar
• Tomanik, E. (2008), “Friction and Wear Bench Tests of Different Engine Liner Surface Finishes,” Tribology International, 41, pp 1032–1038.
   Web of Science ®Google Scholar
• Mezghani, S., Demirci, I., Yousfi, M., and Mansori, M. E. (2013), “Mutual Influence of Crosshatch Angle and Superficial Roughness of Honed Surfaces on Friction in Ring-Pack Tribo-System,” Tribology International, 66, pp 54–59.
   Web of Science ®Google Scholar
• Mezghani, S., Demirci, I., Yousfi, M., and Mansori, M. E. (2013), “Running-In Wear Modeling of Honed Surface for Combustion Engine Cylinder Liners,” Wear, 302, pp 1360–1369.
   Web of Science ®Google Scholar
• Li, C. D., Li, B., Shen, Y., Jin, M., and Xu, J. J. (2018), “Effect of Surface Chemical Etching on the Lubricated Reciprocating Wear of Honed Al-Si Alloy,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 232(6), pp 722–731.
   Web of Science ®Google Scholar
• Kim, E. S., Kim, S. M., and Lee, Y. Z. (2018), “The Effect of Plateau Honing on the Friction and Wear of Cylinder Liners,” Wear, 400, pp 207–212.
   Web of Science ®Google Scholar
• Grabon, W., Pawlus, P., Wos, S., Koszela, W., and Wieczorowski, M. (2017), “Effects of Honed Cylinder Liner Surface Texture on Tribological Properties of Piston Ring–Liner Assembly in Short Time Tests,” Tribology International, 113, pp 137–148.
   Web of Science ®Google Scholar
• Grabon, W., Pawlus, P., Wos, S., Koszela, W., and Wieczorowski, M. (2018), “Evolutions of Cylinder Liner Surface Texture and Tribological Performance of Piston Ring–Liner Assembly,” Tribology International, 127, pp 545–556.
   Web of Science ®Google Scholar
• Guo, Y. B., Lu, X. Q., Li, W. Y., He, T., and Zou, D. Q. (2015), “A Mixed-Lubrication Model Considering Elastoplastic Contact for a Piston Ring and Application to a Ping Pack,” Proceedings of the Institute of Mechanical Engineers - Part D: Journal of Automobile Engineering, 229(2), pp 174–188.
   Web of Science ®Google Scholar
• Patir, N. and Cheng, H. S. (1979), “Application of Average Flow Model to Lubrication between Rough Sliding Surfaces,” Journal of Tribology Technology, 101(2), pp 220–230.
   Web of Science ®Google Scholar
• Priest, M., Dowson, D., and Taylor, C. M. (2000), “Theoretical Modeling of Cavitation in Piston Ring Lubrication,” Proceedings of the Institution of Mechanical Engineers - Part C: Journal of Mechanical Engineering Science, 214(3), pp 435–447.
   Web of Science ®Google Scholar
• Greenwood, J. A. and Tripp, J. H. (1970), “The Contact of Two Nominally Flat Rough Surfaces,” Proceedings of the Institution of Mechanical Engineers, 185(1), pp 625–633.
   Google Scholar
• Rahmani, R., Rahnejat, H., Fitzsimons, B., and Dowson, D. (2017), “The Effect of Cylinder Liner Operating Temperature on Frictional Loss and Engine Emissions in Piston Ring Conjunction,” Applied Energy, 191, pp 568–581.
   Web of Science ®Google Scholar
• Zhu, D., Cheng, H. S., Arai, T., and Hamai, K. (1992), “A Numerical Analysis for Piston Skirts in Mixed Lubrication—Part 1: Basic Modeling,” Journal of Tribology, 114(3), pp 553–562.
   Web of Science ®Google Scholar