Stability, Thermal Conductivity, Viscosity, and Tribological Characterization of Zirconia Nanofluids as a Function of Nanoparticle Concentration

References

• Khare, H. S., Lahouij, I., Jackson, A., Feng, G., Chen, Z., Cooper, G. D., and Carpick, R. W. (2018), “Nanoscale Generation of Robust Solid Films from Liquid-Dispersed Nanoparticles via In Situ Atomic Force Microscopy: Growth Kinetics and Nanomechanical Properties,” ACS Applied Materials & Interfaces, 10(46), pp 40335–40347.
   PubMed Web of Science ®Google Scholar
• Ganapathy Pandian, S. (2014), “Tribological Characteristics of Yttria Stabilized Zirconia Nanolubricants,” SAE Technical Paper 2014-01-2790.
   Google Scholar
• Gullac, B. and Akalin, O. (2010), “Frictional Characteristics of IF-WS2 Nanoparticles in Simulated Engine Conditions,” Tribology Transactions, 53(6), pp 939–947.
   Web of Science ®Google Scholar
• Kato, H. and Komai, K. (2006), “Tribofilm Formation and Mild Wear by Tribo-Sintering of Nanometer-Sized Oxide Particles on Rubbing Steel Surfaces,” Wear, 262, pp 36–41.
   Web of Science ®Google Scholar
• Lee, K., Hwang, Y., Cheong, S., Choi, Y., Kwon L., Lee, J., and Kim, S. H. (2009), “Understanding the Role of Nanoparticles in Nano-Oil Lubrication,” Tribology Letters, 35(2), pp 127–131.
   Web of Science ®Google Scholar
• Thrush, S. (2012), Investigation of Dispersion, Stability, and Tribological Performance of Oil-Based Aluminum Oxide Nanofluids, Master’s Thesis, Rochester, Oakland University, MI.
   Google Scholar
• Harta, I., Owens, K., Santiago, S. D., Schall, J. D., Thrush, S., Barber, G., and Zou, Q. (2013), “Tribological Performance of ZnO-Oil Nanofluids at Elevated Temperatures,” SAE International Journal of Fuels and Lubricants, 6(1), pp 126–131.
   Google Scholar
• Rapoport, L., Leshchinsky, V., Lapsker, I., Volovik, Y., Nepomnyashchy, O., Lvovsky, M., Popovitz-Biro, R., Feldman, Y., and Tenne, R. (2003), “Tribological Properties of WS2 Nanoparticles under Mixed Lubrication,” Wear, 255, pp 785–793.
   Web of Science ®Google Scholar
• Duphil, D., Bastide, S., and Levy-Clement, C. (2002), “Chemical Synthesis of Molybdenum Sulfide Nanoparticles in an Organic Solution,” Journal of Materials Chemistry, 12, pp 2430–2432.
   Web of Science ®Google Scholar
• Spikes, H. (2004), “The History and Mechanisms of ZDDP,” Tribology Letters, 17(3), pp 469–489.
   Web of Science ®Google Scholar
• Topolovec-Miklozic, K., Lockwood, F., and Spikes, H. (2008), “Behavior of Boundary Lubricating Additives on DLC Coatings,” Wear, 265, pp 1893–1901.
   Web of Science ®Google Scholar
• Vengudusamy, B., Green, J., Lamb, G., and Spikes, H. (2011), “Tribological Properties of Tribofilms Formed from ZDDP in DLC/DLC and DLC/Steel Contacts,” Tribology International, 44, pp 165–174.
   Web of Science ®Google Scholar
• Mulvihill, M. J., Habas, S. E., Jen-La Plante, I., Wan, J., and Mokari, T. (2010), “Influence of Size, Shape, and Surface Coating on the Stability of Aqueous Suspensions of CdSe Nanoparticles,” Chemistry of Materials, 22(18), pp 5251–5257.
   Web of Science ®Google Scholar
• Simakov, S. A. and Tsur, Y. (2007), “Surface Stabilization of Nano-Sized Titanium Dioxide: Improving the Colloidal Stability and the Sintering Morphology,” Journal of Nanoparticle Research, 9(3), pp 403–417.
   Web of Science ®Google Scholar
• Kole, M. and Dey, T. K. (2010), “Viscosity of Alumina Nanoparticles Dispersed in Car Engine Coolant,” Experimental Thermal and Fluid Science, 34(6), pp 677–683.
   Web of Science ®Google Scholar
• Bell, N. S., Schendel, M. E., and Piech, M. (2005), “Rheological Properties of Nanopowder Alumina Coated with Adsorbed Fatty Acids,” Journal of Colloid and Interface Science, 287(1), pp 94–106.
   PubMed Web of Science ®Google Scholar
• Ding, P. and Pacek, A. W. (2009), “Ultrasonic Processing of Suspensions of Hematite Nanopowder Stabilized with Sodium Polyacrylate,” AIChE Journal, 55(11), pp 2796–2806.
   Web of Science ®Google Scholar
• Xiong, J., Xiong, S., Guo, Z., Yang, M., Chen, J., and Fan, H. (2012), “Ultrasonic Dispersion of Nano TiC Powders Aided by Tween 80 Addition,” Ceramics International, 38(3), pp 1815–1821.
   Web of Science ®Google Scholar
• Bihari, P., Vippola, M., Schultes, S., Praetner, M., Khandoga, A. G., Reichel, C. A., Coester, C., Tuomi, T., Rehberg, M., and Krombach, F. (2008), “Optimized Dispersion of Nanoparticles for Biological In Vitro and In Vivo Studies,” Particle and Fibre Toxicology, 5, pp 14–27.
   PubMed Web of Science ®Google Scholar
• Hwang, Y., Lee, J. K., Jeong, Y. M., Cheong, S., Ahn, Y. C., and Kim, S. H. (2008), “Production and Dispersion Stability of Nanoparticles in Nanofluids,” Powder Technology, 186(2), pp 145–153.
   Web of Science ®Google Scholar
• Choi, S. U. S. (2009), “Nanofluids: From Vision to Reality through Research,” Journal of Heat Transfer, 131(3), pp 1–9.
   Web of Science ®Google Scholar
• Buongiorno, J., Venerus, D. C., Prabhat, N., McKrell, T., Townsend, J., Christianson, R., Tolmachev, Y. V., Keblinski, P., Hu, L., Alvarado, J. L., et al. (2009), “A Benchmark Study on the Thermal Conductivity of Nanofluids,” Journal of Applied Physics, 106(9), pp 1–14.
   Web of Science ®Google Scholar
• Wan, G. T. Y. and Spikes, H. A. (1988), “The Behavior of Suspended Solid Particles in Rolling and Sliding Elastohydrodynamic Contacts,” Tribology Transactions, 31(1), pp 12–21.
   Web of Science ®Google Scholar
• Fujita, H., Glovnea, R. P., and Spikes, H. A. (2005), “Study of Zinc Dialkyldithiophosphate Antiwear Film Formation and Removal Processes, Part I: Experimental,” Tribology Transactions, 48(4), pp 558–566.
   Web of Science ®Google Scholar
• DeJonghe, L. C. and Rahaman, M. (2003), “Sintering of Ceramics,” In S. Somiya, F. Aldinger, Spriggs, R. M., Uchino, K., Koumoto, K., and Kaneno, M. (Eds.), Handbook of Advanced Ceramics: Materials, Applications, Processing and Properties, Vol. 1–2 (pp 187–264). Amsterdam, The Netherlands: Elsevier Inc.
   Google Scholar