Nonlinear Dynamic Characteristics of Rub-Impact Process at High Circumferential Velocities in No-Load Multiplate Wet Clutch

References

• Hu, J. B., Peng, Z. X., and Yuan, S. H. (2009), “Drag Torque Prediction Model for the Wet Clutches,” Chinese Journal of Mechanical Engineering, 22(2), pp 238–243.
   Web of Science ®Google Scholar
• Yuan, S., Guo, K., Hu, J., Peng, Z. (2010), “Study on Aeration for Disengaged Wet Clutches Using a Two-Phase Flow Model,” Journal of Fluids Engineering, 132(11), pp 111304–1-6.
   Web of Science ®Google Scholar
• Wu, W., Xiong, Z., Hu, J., and Yuan, S. (2015), “Application of CFD to Model Oil–Air Flow in a Grooved Two-Disc System,” International Journal of Heat & Mass Transfer, 91, pp 293–301.
   Web of Science ®Google Scholar
• Pahlovy, S. A., Mahmud, S. F., Kubota, M., Ogawa, M., and Takakura, N. (2016), “Prediction of Drag Torque in a Disengaged Wet Clutch of Automatic Transmission by Analytical Modeling,” Tribology Online, 11, pp 121–129.
   Google Scholar
• Zhang, L., Wei, C., and Hu, J. B. (2018), “Model for the Prediction of Drag Torque Characteristics in Wet Clutch with Radial Grooves,” Proceedings of the Institution of Mechanical Engineers - Part D: Journal of Automobile Engineering, 233(12), pp 3043–3056.
   Web of Science ®Google Scholar
• Mantwill (2000), Influence on the Drag Torques of Fast-Running Multi-Plate Clutches in Automatic Transmissions, Universität der Bundeswehr Hamburg: Hamburg, Germany.
   Google Scholar
• Li, J. (2015), Characteristics of Vibration for High Speed Wet Clutch, Beijing Institute of Technology: Beijing, China.
   Google Scholar
• Pahlovy, S., Mahmud, S., Kubota, M., Ogawa, M., and Takakura, N. (2017), “Development of an Analytical Model for Prediction of Drag Torque Characteristics of Disengaged Wet Clutches in High Speed Region,” SAE Technical Paper 2017-01-1132.
   Google Scholar
• Wang, P., Katopodes, N., and Fujii, Y. (2018), “Statistical Modeling of Plate Clearance Distribution for Wet Clutch Drag Analysis,” SAE International Journal of Passenger Cars-Mechanical Systems, 11(1), pp 76–88.
   Web of Science ®Google Scholar
• Hou, S., Hu, J., and Peng, Z. (2017), “Experimental Investigation on Unstable Vibration Characteristics of Plates and Drag Torque in Open Multiplate Wet Clutch at High Circumferential Speed,” Journal of Fluid Engineering, 139(11), pp 111103-1–111103-11.
   Web of Science ®Google Scholar
• Hu, J., Hou, S., and Wei, C. (2018), “Drag Torque Modeling at High Circumferential Speed in Open Wet Clutches Considering Plate Wobble and Mechanical Contact,” Tribology International, 124, pp 102–116.
   Web of Science ®Google Scholar
• Vohr, J. H. and Pan, C. H. T. (1964), “On the Spiral-Grooved, Self-Acting, Gas-Bearing,” MTI Report No. 63TR 52.
   Google Scholar
• Zirkelback, N. and San Andrés, L. (1999), “Effect of Frequency Excitation on Force Coefficients of Spiral Groove Gas Seals,” Journal of Tribology, 121(4), pp 853–861.
   Web of Science ®Google Scholar
• San Andrés, L., Ryu, K., and Diemer, P. (2015), “Prediction of Gas Thrust Foil Bearing Performance for Oil-Free Automotive Turbochargers,” Journal of Engineering for Gas Turbines and Power, 137(3), pp 032502-1–032502-10.
   Web of Science ®Google Scholar
• Etsion, I. and Dan, Y. (1981), “An Analysis of Mechanical Face Seal Vibrations,” Journal of Lubrication Technology, 103(3), pp 428–433.
   Google Scholar
• Green, I. and Etsion, I. (1983), “Fluid Film Dynamic Coefficients in Mechanical Face Seals,” Journal of Lubrication Technology, 105(2), pp 297–302.
   Google Scholar
• Green, I. and Etsion, I. (1986), “A Kinematic Model for Mechanical Seals with Antirotation Locks or Positive Drive Devices,” Journal of Tribology, 108(1), pp 42–45.
   Web of Science ®Google Scholar
• Green, I. (1989), “Gyroscopic and Support Effects on the Steady-State Response of a Noncontacting Flexibly Mounted Rotor Mechanical Face Seal,” Journal of Tribology, 111(2), pp 200–206.
   Web of Science ®Google Scholar
• Green, I. (1990), “Gyroscopic and Damping Effects on the Stability of a Noncontacting Flexibly-Mounted Rotor Mechanical Face Seal,” Dynamics of Rotating Machinery, pp 153–157.
   Google Scholar
• Liu, Y., Shen, X., and Xu, W. (2002), “Numerical Analysis of Dynamic Coefficients for Gas Film Face Seals,” Journal of Tribology, 124(4), pp 743–754.
   Web of Science ®Google Scholar
• Peng, X., Du, D., and Li, J. (2006), “Effect of Different Section Profile Micro-Pores on Seal Performance of a Laser Surface Textured Mechanical Seal,” Tribology, 26(4), pp 367–371.
   Google Scholar
• Green, I. (2008), “On the Kinematics and Kinetics of Mechanical Seals, Rotors, and Wobbling Bodies,” Mechanism and Machine Theory, 43(7), pp 909–917.
   Web of Science ®Google Scholar
• Shaw, S. W. (1985), “The Dynamics of a Harmonically Excited System Having Rigid Amplitude Constraints (Part 1 and 2),” Journal of Applied Mechanics, 52, pp 453–464.
   Google Scholar
• Yigit. A. S., Ulsoy. A. G., and Scott. R. A. (1990), “Dynamics of a Radially Rotating Beam with Impact, Part 1: Theoretical and Computation Model,” Journal of Vibration and Acoustics, 112, pp 65–70.
   Web of Science ®Google Scholar
• Zhang, J., Kang, W., and Liu, Y. (2009), “Numerical Method and Bifurcation Analysis of Jeffcott Rotor System Supported in Gas Journal Bearings,” Journal of Computational & Nonlinear Dynamics, 4(1), pp 2102–2105.
   Web of Science ®Google Scholar
• Han, M., Li, Y., Zhu, L., Ding, X., and Yu, S. (2013), “Nonlinear Stability Analysis of Angular Wobbly in the System of Dry Gas Seal,” Chinese Journal of Applied Mechanics, 4, pp 604–607.
   Google Scholar
• Varney, P. and Green, I. (2015), “Nonlinear Phenomena, Bifurcations, and Routes to Chaos in an Asymmetrically Supported Rotor–Stator Contact System,” Journal of Sound and Vibration, 336, pp 207–226.
   Web of Science ®Google Scholar
• Varney, P. and Green, I. (2016), “Rotordynamic Analysis of Rotor–Stator Rub Using Rough Surface Contact,” Journal of Vibration and Acoustics, 138(2), pp 021015-1–021015-9.
   Web of Science ®Google Scholar
• Varney, P. and Green, I. (2016), “Rough Surface Contact of Curved Conformal Surfaces: An Application to Rotor–Stator Rub,” Journal of Tribology, 138(4), pp 041401-1–041401-7.
   Web of Science ®Google Scholar
• Varney, P. and Green, I. (2016), “Impact Phenomena in a Noncontacting Mechanical Face Seal,” Journal of Tribology, 139(2), pp 022201-1–022201-8.
   Web of Science ®Google Scholar
• Hunt, K. H. and Crossley, F. E. (1975), “Coefficient of Restitution Interpreted as Damping in Vibroimpact,” Journal of Applied Mechanics, 42(2), pp 440–445.
   Web of Science ®Google Scholar
• Mishra, B. K. and Murty, C. V. R. (2001), “On the Determination of Contact Parameters for Realistic DEM Simulations of Ball Mills,” Powder Technology, 115(3), pp 290–297.
   Web of Science ®Google Scholar
• Mishra, B. K. and Thornton, C. (2002), “An Improved Contact Model for Ball Mill Simulation by the Discrete Element Method,” Advanced Powder Technology, 13(1), pp 25–41.
   Web of Science ®Google Scholar
• Ma, Q., Xu, Y., and Gao, L. (2016), “Simulation Analysis of Helical Gears in the Gear Box of the Rolling Mill,” Proceedings of the 2nd AME International Conference on Advances in Mechanical Engineering and Industrial Informatics, pp 330–333, Atlantis Press: Pairs, France.
   Google Scholar
• Shi, X. and Polycarpou, A. A. (2005), “Measurement and Modeling of Normal Contact Stiffness and Contact Damping at the Meso Scale,” Journal of Vibration and Acoustics, 127(1), pp 52–60.
   Web of Science ®Google Scholar