A Mixed TEHL Model for the Prediction of Thermal Effect on Lubrication Performance in Spiral Bevel Gears

References

• Dowson, D. (1962), “A Generalized Reynolds Equation for Fluid-Film Lubrication,” International Journal of Mechanical Sciences, 4, pp 159–170.
   Google Scholar
• Cheng, H. S. (1965), “A Refined Solution to the Thermal-Elastohydrodynamic Lubrication of Rolling and Sliding Cylinders,” Tribology Transactions, 8, pp 397–410.
   Google Scholar
• Cheng, H. S. and Sternlicht, B. (1965), “A Numerical Solution for the Pressure, Temperature, and Film Thickness Between Two Infinitely Long, Lubricated Rolling and Sliding Cylinders, under Heavy Loads,” Journal of Basic Engineering, 87, pp 695–797.
   Web of Science ®Google Scholar
• Guo, F., Yang, P. R., and Qu, S. Y. (2000), “On the Theory of Thermal Elastohydrodynamic Lubrication at High Slide–Roll Ratios—Circular Glass–Steel Contact Solution at Opposite Sliding,” Journal of Tribology, 123, pp 816–821. doi:10.1115/1.1330739
   Web of Science ®Google Scholar
• Kim, H. J., Ehret, P., Dowson, D., and Taylor, C. M. (2001), “Thermal Elastohydrodynamic Analysis of Circular Contacts Part 1: Newtonian Model,” Proceedings of the Institution of Mechanical Engineers, 215, pp 339–352. doi:10.1243/0957650011538569
   Web of Science ®Google Scholar
• Yang, P., Qu, S., Kaneta, M., and Nishikawa, H. (2001), “Formation of Steady Dimples in Point TEHL Contacts,” Journal of Tribology, 123, pp 42–49. doi:10.1115/1.1332399
   Web of Science ®Google Scholar
• Liu, X. L., Jiang, M., Yang, P., and Kaneta, M. (2005), “Non-Newtonian Thermal Analyses of Point EHL Contacts Using the Eyring Model,” Journal of Tribology, 127, pp 70–81. doi:10.1115/1.1843161
   Web of Science ®Google Scholar
• Habchi, W., Eyheramendy, D., Bair, S., Vergne, P., and Morales, G. (2008), “Thermal Elastohydrodynamic Lubrication of Point Contacts Using a Newtonian/Generalized Newtonian Lubricant,” Tribology Letters, 30(1), pp 281–286. doi:10.1007/s11249-008-9310-9
   Web of Science ®Google Scholar
• Chang, L. and Farnum, C. (1992), “A Thermal Model for Elastohydrodynamic Lubrication of Rough Surfaces,” Tribology Transactions, 35, pp 281–286. doi:10.1080/10402009208982119
   Web of Science ®Google Scholar
• Ai, X. L. (1993), Numerical Analyses of Elastohydrodynamically Lubricated Line and Point Contacts with Rough Surfaces by Using Semi-System and Multigrid Methods, Ph.D. Thesis, Northwestern University, Evanston, IL.
   Google Scholar
• Zhu, D. and Ai, X. L. (1997), “Point Contact EHL Based on Optically Measured Three-Dimensional Rough Surfaces,” Journal of Tribology, 119, pp 375–384. doi:10.1115/1.2833498
   Web of Science ®Google Scholar
• Zhu, D. (2003), “Effect of Surface Roughness on Mixed EHD Lubrication Characteristics,” Tribology Transactions, 46, pp 44–48. doi:10.1080/10402000308982598
   Web of Science ®Google Scholar
• Zhu, D., Liu, Y., and Wang, Q. (2014), “On the Numerical Accuracy of Rough Surface EHL Solution,” Tribology Transactions, 57, pp 570–580. doi:10.1080/10402004.2014.886349
   Web of Science ®Google Scholar
• Zhang, J. G., Liu, S. J., and Fang, T. (2017), “On the Prediction of Friction Coefficient and Wear in Spiral Bevel Gears with Mixed TEHL,” Tribology International, 115, pp 535–545. doi:10.1016/j.triboint.2017.06.035
   Web of Science ®Google Scholar
• Wang, X. P., Liu, Y. C., and Zhu, D. (2017), “Numerical Solution of Mixed Thermal Elastohydrodynamic Lubrication in Point Contacts with Three-Dimensional Surface Roughness,” Journal of Tribology, 139, pp 011501. doi:10.1115/1.4032963
   Web of Science ®Google Scholar
• Simon, V. (2010), “Influence of Position Errors on EHD Lubrication in Spiral Bevel Gears,” STLE/ASME 2010 International Joint Tribology Conference, San Francisco, California, pp 179–181.
   Google Scholar
• Mohammadpour, M., Theodossiades, S., and Rahnejat, H. (2012), “Elastohydrodynamic Lubrication of Hypoid Gear Pairs at High Loads,” Proceedings of the Institution of Mechanical Engineers, 226(3), pp 183–198. doi:10.1177/1350650111431027
   Google Scholar
• Mohammadpour, M., Theodossiades, S., Rahnejat, H., and Saunders, T. (2014), “Non-Newtonian Mixed Elastohydrodynamics of Differential Hypoid Gears at High Loads,” Meccanica, 49(5), pp 1115–1138. doi:10.1007/s11012-013-9857-x
   Web of Science ®Google Scholar
• Mohammadpour, M., Theodossiades, S., Rahnejat, H., and Dowson, D. (2017), “Non-Newtonian Mixed Thermo-Elastohydrodynamics of Hypoid Gear Pairs,” Proceedings of the Institution of Mechanical Engineers, 232(9), pp 1105–1125. doi:10.1177/1350650117700756
   Web of Science ®Google Scholar
• Pu, W., Wang, J., Yang, R., and Zhu, D. (2015), “Mixed Elastohydrodynamic Lubrication with Three-Dimensional Machined Roughness in Spiral Bevel and Hypoid Gears,” Journal of Tribology, 137(4), pp 041503. doi:10.1115/1.4030185
   Web of Science ®Google Scholar
• Cao, W., Pu, W., Wang, J., and Xiao, K. (2018), “Effect of Contact Path on the Mixed Lubrication Performance, Friction and Contact Fatigue in Spiral Bevel Gears,” Tribology International, 123, pp 359–371. doi:10.1016/j.triboint.2018.03.015
   Web of Science ®Google Scholar
• Foord, C. A., Wedeven, L. D., Westlake, F. J., and Cameron, A. (1969), “Optical Elastohydrodynamic,” Proceedings of the Institution of Mechanical Engineers, 184(1), pp 487–505. doi:10.1243/PIME_PROC_1969_184_041_02
   Google Scholar
• Wang, J., Yang, P., Kaneta, M., and Nishikawa, H. (2003), “On the Surface Dimple Phenomena in Elliptical TEHL Contacts with Arbitrary Entrainment,” Journal of Tribology, 125(1), pp 102–109. doi:10.1115/1.1494087
   Web of Science ®Google Scholar
• Stahl, K., Michaelis, K., Mayer, J., Weigl, A., Lohner, T., Omasta, M., Hartl, M., and Křupka, I. (2013), “Theoretical and Experimental Investigations on EHL Point Contacts with Different Entrainment Velocity Directions,” Tribology Transactions, 56, pp 728–738. doi:10.1080/10402004.2013.785624
   Web of Science ®Google Scholar
• Hoehn, B.-R., Michaelis, K., Mayer, J., and Weigl, A. (2011), “Influence of Surface Velocity Directions on Lubricant Film Formation in EHL Point Contacts,” Tribology International, 47, pp 9–15. doi:10.1016/j.triboint.2011.10.005
   Web of Science ®Google Scholar
• Omasta, M., Křupka, I., and Hartl, M. (2013), “Effect of Surface Velocity Directions on Elastohydrodynamic Film Shape,” Tribology Transactions, 56(2), pp 301–309. doi:10.1080/10402004.2012.750024
   Web of Science ®Google Scholar
• Greenwood, J. A. (2000), “Two-Dimensional Flow of a Non-Newtonian Lubricant,” Proceedings of the Institution of Mechanical Engineers, 214(1), pp 29–41. doi:10.1243/1350650001542990
   Google Scholar
• Liu, Y. C., Wang, Q., Bair, S., and Vergne, P. (2007), “A Quantitative Solution for the Full Shear-Thinning EHL Point Contact Problem Including Traction,” Tribology Letters, 28(2), pp 171–181. doi:10.1007/s11249-007-9262-5
   Web of Science ®Google Scholar
• Zhu, D. and Wen, S. Z. (1984), “A Full Numerical Solution for the Thermoelasto-Hydrodynamic Problems in Elliptical Contacts,” Journal of Tribology, 106(2), pp 246–254. doi:10.1115/1.3260895
   Web of Science ®Google Scholar
• Liu, Y. C., Wang, H., Wang, W. Z., Hu, Y. Z., and Zhu, D. (2002), “Method Comparison in Computation of Temperature Rise on Frictional Interface,” Tribology International, 35(8), pp 549–560. doi:10.1016/S0301-679X(02)00062-2
   Web of Science ®Google Scholar
• Zhu, D. (2007), “On Some Aspects of Numerical Solutions of Thin-Film and Mixed Elastohydrodynamic Lubrication,” Proceedings of the Institution of Mechanical Engineers, 221(5), pp 561–579.
   PubMedGoogle Scholar