References
- Gross, W. A. (1962), Gas Film Lubrication, Wiley: New York.
- Langlois, W. E. (1962), “Isothermal Squeeze Films,” Quarterly of Applied Mathematics, 1962(2), pp 131–150. doi:10.1090/qam/99963
- DiPrima, R. C. (1973), “Asymptotic Methods for an Infinitely Long Step Slider Squeeze Bearing,” Journal of Lubrication Technology, 95(2), pp 208–215. doi:10.1115/1.3451772
- Takada, H. and Miura, H. (1983), “Characteristics of Squeeze Air Film between Nonparallel Plates,” Journal of Lubrication Technology, 105(1), pp 147–151. doi:10.1115/1.3254532
- Salbu, E. O. J. (1964), “Compressible Squeeze Films and Squeeze Bearings,” Journal of Basic Engineering, 86(3), pp 355–366. doi:10.1115/1.3653080
- Beck, J. V. and Stordtman, C. L. (1967), “Stability of a Squeeze-Film Journal Bearing,” Journal of Lubrication Technology, 89(3), pp 369–373. doi:10.1115/1.3616994
- Minikes, A. and Bucher, I. (2004), “Levitation Force Induced by Pressure Radiation in Gas Squeeze Films,” Journal of the Acoustical Society of America, 116(1), pp 217–226. doi:10.1121/1.1760110
- Kuroda, S. and Hirata, N. (1984), “The Characteristic of Motion of a Round Plate Supported on Squeeze air Film,” Journal of Lubrication, 50(459), pp 2727–2731.
- Hashimoto, Y. (1996), “Near Field Acoustic Levitation of Planar Specimens Using Flexural Vibration,” Journal of the Acoustical Society of America, 100(4), pp 2057–2061. doi:10.1121/1.417915
- Minikes, A. and Bucher, I. (2003), “Coupled Dynamics of a Squeeze-Film Levitated Mass and a Vibrating Piezoelectric Disc: Numerical Analysis and Experimental Study,” Journal of Sound and Vibration, 263(2), pp 241–268. doi:10.1016/S0022-460X(02)01121-5
- Mori, A., Aoyama, K., and Mori, H. (1980), “Influence of the Gas-Film Inertia Forces on the Dynamic Characteristics of Externally Pressurized Gas Lubricated Journal Bearings, Part I Proposal of Governing Equations,” Bulletin of the JSME, 23(173), pp 582–586. doi:10.1299/jsme1958.23.582
- Ha, D. N., Stolarski, T. A., and Yoshimoto, S. (2005), “An Aerodynamic Bearing with Adjustable Geometry and Self-Lifting Capacity. Part 1: Self-Lift Capacity by Squeeze Film,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 219, pp 33–39. doi:10.1243/135065005X9682
- Stolarski, T. A. and Chai, W. (2006), “Load-Carrying Capacity Generation in Squeeze Film Action,” International Journal of Mechanical Sciences, 48(7), pp 736–741. doi:10.1016/j.ijmecsci.2006.01.013
- Yoshimoto, S., Sekine, H., and Miyatake, M. (2010), “A Non-Contact Chuck Using Ultrasonic Vibration: Analysis of the Primary Cause of the Holding Force Acting on a Floating Object,” Proceedings of the Institution of Mechanical Engineers - Part C: Journal of Mechanical Engineering Science, 224(2), pp 305–313. doi:10.1243/09544062JMES1557
- Kuzma, D. C., Maki, E. R., and Donnelly, R. J. (1964), “The Magnetohydrodynamic Squeeze Film,” Journal of Fluid Mechanics, 19(3), pp 395–401. doi:10.1017/S0022112064000805
- Kuzma, D. C. (1968), “Fluid Inertia Effects in Squeeze Films,” Applied Scientific Research, 18(1), pp 15–20. doi:10.1007/BF00382330
- Mori, A., Aoyama, K., and Mori, H. (1980), “Influence of the Gas-Film Inertia Forces on the Dynamic Characteristics of Externally Pressurized, Gas Lubricated Journal Bearings: 2nd Report, Analyses of Whirl Instability and Plane Vibration,” Bulletin of the JSME, 23(173), pp 636–641.
- Tichy, J. A. (1981), “An Approximate Analysis of Fluid Inertia Effects in Axisymmetric Laminar Squeeze Film Flow at Arbitrary Reynolds Number,” Applied Scientific Research, 37(3), pp 301–312. doi:10.1007/BF00951255
- Veijola, T. (2004), “Compact Models for Squeezed Film Dampers with Inertial and Rarefied Gas Effects,” Journal of Microengineering, 14(6), pp 1109–1118. doi:10.1088/0960-1317/14/7/034
- Yoshimoto, S., Kobayashi, H., and Miyatake, M. (2007), “Float Characteristics of a Squeeze-Film Air Bearing for a Linear Motion Guide Using Ultrasonic Vibration,” Tribology International, 40(3), pp 503–511. doi:10.1016/j.triboint.2006.05.002
- Stolarski, T. A. and Chai, W. (2008), “Inertia Effect in Squeeze Film Air Contact,” Tribology International, 41(8), pp 716–723. doi:10.1016/j.triboint.2007.12.008
- Otsu, Y., Somaya, K., Yoshimoto, S. (2011), “High-Speed Stability of a Rigid Rotor Supported by Aerostatic Journal Bearings with Compound Restrictors,” Tribology International, 44(1), pp 9–17. doi:10.1016/j.triboint.2010.09.007
- Yang, Q. Zhang, H. (2016), “Improved Modified Reynolds Equation for Thin-Film Gas Lubrication from an Extended Slip Velocity Boundary Condition,” Microsystem Technologies, 22(12), pp 2869–2875. doi:10.1007/s00542-015-2667-4
- Leung, R. C. W., Thurber, T., and Ye, W. (2011), “On the Modified Reynolds Equation Model for the Prediction of Squeeze-Film Gas Damping in a Low Vacuum,” Microfluidics and Nanofluidics, 11(6), pp 753–762. doi:10.1007/s10404-011-0840-3
- Deng, X., Weaver, B., Watson, C., Branagan, M., Wood, H., and Fittro, R (2017), “Modeling Reichardt’s Formula for Eddy-Viscosity in the Fluid Film of Tilting Pad Thrust Bearings,” Paper presented at ASME 2017 International Mechanical Engineering Congress and Exposition IMECE2017, Tampa, FL, November 3–9, 2017. doi:10.1115/IMECE2017-71749
- Deng, X., Gates, H., Fittro, R., Wood, H. (2018), “Methodology of Turbulence Parameter Correction in Water-Lubricated Thrust Bearings,” Journal of Fluids Engineering, 141(7), pp 1–9. doi:10.1115/1.4042161
- Wei, B., Shaham, R., Bucher, I., Luo, J. (2018), “Theoretical Investigation and Prototype Design for Non-Parallel Squeeze Film Movement Platform Driven by Standing Waves,” Tribology International, 119(3), pp 539–548. doi:10.1016/j.triboint.2017.10.034