Representative Tribometer Testing of Wire Rope Fretting Contacts: The Effect of Lubrication on Fretting Wear

References

• Verreet, R. and Ridge, I. (2005), Wire Rope Forensics, Kirkel, Germany: Casar Special Wire Ropes.
   Google Scholar
• Chaplin, C. R. and Potts, A. E. (1991), “Discard Criteria for Mooring Ropes,” Wire Rope Offshore—A Critical Review of Wire Rope Endurance Research Affecting Offshore Applications, , pp 226–264. London, UK: Health and Safety Executive, Marine Technology Directorate Ltd., University of Reading.
   Google Scholar
• Steven, S. (2016), “Validity of Rope Discard Criteria,” MCA Wire Rope Forum Workshop, 22nd June 2016, Amsterdam, The Netherlands.
   Google Scholar
• Union Wire Rope. (2008), Wire Rope User’s Handbook, WireCo WorldGroup: Kansas City, MO.
   Google Scholar
• ISO 4309. (2004) “Cranes—Wire Ropes—Care, Maintenance, Installation, Examination and Discard,” 3rd Ed. Geneva, Switzerland: ISO.
   Google Scholar
• Wang, D., Zhang, D., Wang, S., and Ge, S. (2013), “Finite Element Analysis of Hoisting Rope and Fretting Wear Evolution and Fatigue Life Estimation of Steel Wires,” Engineering Failure Analysis, 27, pp 173–193. doi:10.1016/j.engfailanal.2012.08.014
   Web of Science ®Google Scholar
• Saipem. (2016), “Large Wire Ropes,” IMCA Wire Rope Forum Workshop, 22nd June 2016, Amsterdam, The Netherlands.
   Google Scholar
• Raoof, M. and Kraincanic, I. (1995), Analysis of a Large Diameter Wire Rope,” Journal of Engineering Mechanics, 121, pp 667–675. doi:10.1061/(ASCE)0733-9399(1995)121:6(667)
   Web of Science ®Google Scholar
• Nabijou, S. and Hobbs, R. E. (1995), “Relative Movements within Wire Ropes Bent over Sheaves,” Journal of Strain Analysis for Engineering Design, 30, pp 155–165. doi:10.1243/03093247V302155
   Web of Science ®Google Scholar
• Gnanavel, B. K., Gopinath, D., and Parthasarathy, N. S. (2010), “Effect of Friction on Coupled Contact in a Twisted Wire Cable,” Journal of Applied Mathematics, 77, pp 024501-1–024501–6.
   Google Scholar
• Kumar, K., Cochran, J. E., Jr, and Cutchins, J. A. (1997), “Contact Stresses in Cables Due to Tension and Torsion,” Journal of Applied Mechanics, 64, pp 935–939. doi:10.1115/1.2789002
   Web of Science ®Google Scholar
• Cruzado, A., Hartelt, M., Wasche, R., Urchegui, M. A., Gomez, X. (2010), “Fretting Wear of Thin Steel Wires. Part 1: Influence of Contact Pressure,” Wear, 268, pp 1409–1416. doi:10.1016/j.wear.2010.02.017
   Web of Science ®Google Scholar
• Cruzado, A., Hartelt, M., Wasche, R., Urchegui, M. A., Gomez, X. (2011), “Fretting Wear of Thin Steel Wires. Part 2: Influence of Crossing Angle,” Wear, 273, pp 60–69. doi:10.1016/j.wear.2011.04.012
   Web of Science ®Google Scholar
• Urchegui, M. A., Martelt, M., Klaffke, D., and Gomez, X. (2007), “Laboratory Fretting Tests with Thin Wire Specimens,” Tribotest, 13, pp 67–81. doi:10.1002/tt.34
   Google Scholar
• Argatov, I. (2011), “Response of a Wire Rope Strand to Axial and Torsional Loads: Asymptotic Modeling of the Effect of Interwire Contact Deformations,” International Journal of Solids and Structures, 48, pp 1413–1423. doi:10.1016/j.ijsolstr.2011.01.021
   Web of Science ®Google Scholar
• Jiang, W.-G., Warby, M. K., and Henshall J. L. (2008), “Statically Indeterminate Contact in Axially Loaded Wire Strand,” European Journal of Mechanics A/Solids, 27, pp 69–78. doi:10.1016/j.euromechsol.2007.02.003
   Web of Science ®Google Scholar
• Cruzado, A., Urchegui, M. A., and Gomez, X. (2012), “Finite Element Modeling and Experimental Validation of Fretting Wear Scars in Thin Steel Wires,” Wear, 289, pp 26–38. doi:10.1016/j.wear.2012.04.018
   Web of Science ®Google Scholar
• Miscoe, A. J. and McKewan, W. M. (1993), Wire Rope Research: Analysis of Bending Fatigue in a 2-Inch IWRC Wire Rope, Pittburgh, PA, USA: United States Department of the Interior, Bureau of Mines.
   Google Scholar
• Raoof, M. (1990), “Comparison between the Performance of Newly Manufactured and Well-Used Spiral Strands,” Proceedings of the Institution of Civil Engineers Part 2, 89, pp 103–120. doi:10.1680/iicep.1990.5254
   Google Scholar
• Chaplin, C. R. and Potts, A. E. (1991), “Inspection of Mooring Ropes,” Wire Rope Offshore—A Critical Review of Wire Rope Endurance Research Affecting Offshore Applications, pp 265–288. London, UK: Health and Safety Executive, Marine Technology Directorate Ltd., University of Reading.
   Google Scholar
• Chaplin, C. R. and Potts, A. E. (1991), “Corrosion Effects on Mooring Ropes,” Wire Rope Offshore—A Critical Review of Wire Rope Endurance Research Affecting Offshore Applications, pp 182–225. London, UK: Health and Safety Executive, Marine Technology Directorate Ltd., University of Reading.
   Google Scholar
• Wirerope Works Inc. (2008), Rotation-Resistant Wire Rope, Williamsport, PA: Wirerope Works Inc.
   Google Scholar
• Boniardi, M., Cincera, S., D-Errico, F., and Tagliabue, C. (2007), “Fretting Phenomena on an All Aluminium Alloy Conductor,” Key Engineering Materials, 348–349, pp 5–8. doi:10.4028/www.scientific.net/KEM.348-349.5
   Google Scholar
• Fouvry, S., Kapsa, P., and Vincent, L. (2003), “A Global Methodology to Quantify Fretting Damages,” Fretting Fatigue: Advances in Basic Understanding and Applications, Mutoh, Y., Kinyon, S. E., and Hoeppner, D. W. (Eds.), pp 17–32, West Conshohocken, PA, USA: ASTM International.
   Google Scholar
• Varenberg, M., Etsion, I., and Halperin, G. (2004), “Slip Index: A New Unified Approach to Fretting,” Tribology Letters, 17, pp 569–573. doi:10.1023/B:TRIL.0000044506.98760.f9
   Web of Science ®Google Scholar
• Zhang, D., Shen, Y., Xu, L., and Ge, S. (2011), “Fretting Wear Behaviors of Steel Wires in Coal Mine under Different Corrosive Mediums,” Wear, 271, pp 866–874. doi:10.1016/j.wear.2011.03.028
   Web of Science ®Google Scholar
• Goudreau, S., Charette, F., Hardy, C., and Cloutier, L. (1998), “Bending Energy Dissipation of Simplified Single-Layer Stranded Cable,” Journal of Engineering Mechanics, 124, pp 811–817. doi:10.1061/(ASCE)0733-9399(1998)124:8(811)
   Web of Science ®Google Scholar
• Hong, K.-J., Der Kiureghian, A., and Sackman, J. L. (2005), “Bending Behavior of Helically Wrapped Cables,” Journal of Engineering Mechanics, 131, pp 500–511. doi:10.1061/(ASCE)0733-9399(2005)131:5(500)
   Web of Science ®Google Scholar
• Martinez, M., Kante, R. B., Sicsic, P., and Cannell, D. (2017), “Two Scale Numerical Simulation of High Value Large Diameter Rope,” Proceedings of the OIPEEC Conference, La Rochelle, France, 4–6 April 2017. Dohm, M. A. R. (Ed.), pp 313–330, St Martin d'Heres, France: OIPEEC.
   Google Scholar
• Raoof, M. (1990), “Simple Formulae for Spiral Strands and Multi-Strand Ropes,” Proceedings of the Institution of Civil Engineers Part 2, 8, pp 527–542. doi:10.1680/iicep.1990.11878
   Google Scholar
• Raoof, M. and Kraincanic, I. (1996), “Prediction of Axial Hysteresis in Locked Coil Ropes,” Journal of Strain Analysis for Engineering Design, 31, pp 341–351. doi:10.1243/03093247V315341
   Web of Science ®Google Scholar
• Zhang, D.-K., Wang, S.-Q., Shen, Y., and Ge, S.-R. (2012), “Interactive Mechanisms of Fretting Wear and Corrosion of Steel Wires in Alkaline Corrosion Medium,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 226, pp 738–747. doi:10.1177/1350650112445852
   Web of Science ®Google Scholar
• Bill, R. C. and Rohn, D. A. (1978), “Influence of Fretting on Flexural Fatigue of 304 Stainless Steel and Mild Steel,” Washington DC, USA: National Aeronautics and Space Administration.
   Google Scholar
• Waterhouse, R. B. and Taylor, D. E. (1971), “The Initiation of Fatigue Cracks in a 0.7 Per Cent Carbon Steel by Fretting,” Wear, 17, pp 139–147. doi:10.1016/0043-1648(71)90024-X
   Web of Science ®Google Scholar
• Jin, X., Shipway, P. H., and Sun, W. (2017), “The Role of Temperature and Frequency on Fretting Wear of a Like-on-Like Stainless Steel Contact,” Tribology Letters, 65, pp 1–15. doi:10.1007/s11249-017-0858-0
   Web of Science ®Google Scholar
• Harris, S. J., Waterhouse, R. B., and McColl, I. R. (1993), “Fretting Damage in Locked Coil Steel Ropes,” Wear, 170, pp 63–70. doi:10.1016/0043-1648(93)90352-M
   Web of Science ®Google Scholar
• Wang, D., Zhang, D., and Ge, S. (2012), “Effect of Displacement Amplitude on Fretting Fatigue Behavior of Hoisting Rope Wires in Low Cycle Fatigue,” Tribology International, 52, pp 178–189. doi:10.1016/j.triboint.2012.04.008
   Web of Science ®Google Scholar
• Lombardini, L. (2017), “Verification of Rope Discard Criteria by Post Retirement Analysis,” Proceedings of the OIPEEC Conference, La Rochelle, France, 4–6 April 2017. Dohm, M. A. R. (Ed.), pp 179–194, St Martin d'Heres, France: OIPEEC.
   Google Scholar
• Perier, V., Dieng, L., Gaillet, L., and Fouvry, S. (2011), “Influence of an Aqueous Environment on the Fretting Behaviour of Steel Wires Used in Civil Engineering Cables,” Wear, 271, pp 1585–1593. doi:10.1016/j.wear.2011.01.095
   Web of Science ®Google Scholar
• Waterhouse, R. B. and Taylor, D. E. (1970), “The Relative Effects of Fretting and Corrosion on the Fatigue Strength of Eutectoid Steel,” Wear, 15, pp 449–451. doi:10.1016/0043-1648(70)90239-5
   Web of Science ®Google Scholar
• Roche, V., Vanpeene, V., Rocha Prado, A. C., Nogueria, R. P., Pernot, S. (2017), “Preliminary Investigations of the Understanding of the Corrosion Mechanisms in Steel Wire Ropes,” Proceedings of the OIPEEC Conference, La Rochelle, France, 4–6 April 2017. Dohm, M. A. R. (Ed.), pp 363–369, St Martin d'Heres, France: OIPEEC.
   Google Scholar
• Waterhouse, R. B. (2003), “Fretting in Steel Ropes and Cables—A Review,” Fretting Fatigue: Advances in Basic Understanding and Applications, Mutoh, Y., Kinyon, S. E., and Hoeppner, D. W. (Eds.), pp 3–16, 4–6 April 2017. Dohm, M. A. R. (Ed.), ASTM International.
   Google Scholar
• Raoof, M. and Huang, Y.-P. (1991), “Upper-Bound Prediction of Cable Damping under Cyclic Bending,” Journal of Engineering Mechanics, 117, pp 2729–2747. doi:10.1061/(ASCE)0733-9399(1991)117:12(2729)
   Web of Science ®Google Scholar
• McColl, I. R., Waterhouse, R. B., Harris, S. J., and Tsujikawa, M. (1995), “Lubricated Fretting Wear of a High-Strength Eutectoid Steel Rope Wire,” Wear, 185, pp 203–212. doi:10.1016/0043-1648(95)06616-0
   Web of Science ®Google Scholar
• Shen, Y., Zhang, D., Duan, J., and Wang, D. (2011), “Fretting Wear Behaviors of Steel Wires under Friction-Increasing Grease Conditions,” Tribology International, 44, pp 1511–1517. doi:10.1016/j.triboint.2010.10.021
   Web of Science ®Google Scholar
• Waterhouse, R. B., McColl, I. R., Harris, S. J., and Tsujikawa, M. (1994), “Fretting Wear of a High-Strength Heavily Work-Hardened Eutectoid Steel,” Wear, 175, pp 51–57. doi:10.1016/0043-1648(94)90167-8
   Web of Science ®Google Scholar
• Llavori, I., Zabala, A., Otano, N., Tato, W., et al. (2019), “Development of a Modular Fretting Wear and Fretting Fatigue Tribometer for Thin Steel Wires: Design Concept and Preliminary Analysis of the Effect of Crossing Angle on Tangential Force,” Metals, 9, pp 1–11. doi:10.3390/met9060674
   Web of Science ®Google Scholar
• Llavori, I., Zabala, A., Aginagalde, A., Tato, W., Ayerdi, J. J., and Gomez, X. (2020), “Critical Analysis of Coefficient of Friction Derivation Methods for Fretting under Gross Slip Regime,” Tribology International, 143. doi:10.1016/j.triboint.2019.105988
   Web of Science ®Google Scholar
• Wang, D., Song, D., Wang, X., Zhang, D., Zhang, C., Wang, D., and Araujo, J. A. (2019), “Tribo-Fatigue Behaviors of Steel Wires under Couples Tension–Torsion in Different Environmental Media,” Wear, 420–421, pp 38–53. doi:10.1016/j.wear.2018.12.038
   Web of Science ®Google Scholar
• Nishida, T., Kondoh, K., Xu, J. Q., and Mutoh, Y. (2003), “Observations and Analysis of Relative Slip in Fretting Fatigue,” Fretting Fatigue: Advances in Basic Understanding and Applications, Mutoh, Y., Kinyon, S. E., and Hoeppner, D. W. (Eds.), West Conshohocken, PA, USA: ASTM International.
   Google Scholar
• Bhushan, B. (2002), Introduction to Tribology, Hoboken, NJ, USA: Wiley & Sons.
   Google Scholar
• Atkins, A. G. and Tabor, D. (1966), “The Plastic Deformation of Crossed Cylinders and Wedges,” Journal of the Institute of Metals, 94., Paper 2346, pp 107–115
   Google Scholar
• Williams, J. A. and Dwyer-Joyce, R. S. (2001), “Contact between Solid Surfaces,” Modern Tribology Handbook, Bhushan, B. I. (Ed.), vol. 1, Section 3.2. London, UK: CRC Press.
   Google Scholar
• Meleddu, M., Foti, F., and Martinelli, L. (2017), “Temperatures in Active Heave Compensation Ropes,” Proceedings of the OIPEEC Conference, La Rochelle, France, 4–6 April 2017. Dohm, M. A. R. (Ed.), pp 231–248.
   Google Scholar
• Hamilton, G. M. (1983), “Explicit Equations for the Stresses Beneath a Sliding Spherical Contact,” Proceedings of the Institution of Mechanical Engineers - Part C: Mechanical Engineering Science, 197, pp 53–59. doi:10.1243/PIME_PROC_1983_197_076_02
   Web of Science ®Google Scholar
• D217-17. (2017), “Standard Test Methods for Cone Penetration of Lubricating Grease.” West Conshohocken, PA, USA: ASTM International
   Google Scholar
• D937-07. (2012), “Standard Test Method for Cone Penetration of Petrolatum.” West Conshohocken, PA, USA: ASTM International
   Google Scholar
• D1321-16a. (2016), “Standard Test Method for Needle Penetration of Petroleum Waxes.” West Conshohocken, PA, USA: ASTM International
   Google Scholar
• Endo, H. and Marui, E. (2004), “Studies on Fretting Wear (Combinations of Various Ceramic Spheres and Carbon Steel Plates),” Wear, 257, pp 80–88. doi:10.1016/j.wear.2003.10.018
   Web of Science ®Google Scholar
• Maruyama, T., Saitoh, T., and Yokouchi, A. (2016), “Differences in Mechanisms for Fretting Wear Reduction between Oil and Grease Lubrication,” Tribology Transactions, 60, pp 497–505. doi:10.1080/10402004.2016.1180469
   Web of Science ®Google Scholar
• Zhou, Z. R. and Vincent, L. (1999), “Lubrication in Fretting—A Review,” Wear, 225–229, pp 962–967. doi:10.1016/S0043-1648(99)00038-1
   Web of Science ®Google Scholar