Tribological Properties of Friction Pair between 316L Stainless Steel and CF/PEEK with Nonsmooth Surface under Seawater Lubrication

References

• Black, S. A. (1982), “Experimental Seawater Hydraulic System for U.S. Navy Diver Tools,” Proceedings of the 38th National Conference on Fluid Power, Houston, Texas, US, November 16–18, Vol. 36, pp 71–75, Illinois Institute of Technology.
   Google Scholar
• Wang, D., Li, Z. Y., and Zhu Y. Q. (2003), “Lubrication and Tribology in Seawater Hydraulic Piston Pump,” Journal of Marine Science and Application, 2(1), pp 35–40. doi:10.1007/BF02935573
   Google Scholar
• Bucinell, R. B., Coonrod, D., Kroesen, G., and Kimball, B. A. (2011), “Design and Manufacturing of a Seawater Powered Hydraulic Intensifier Pump,” International SAMPE Technical Conference, Long Beach, CA, US, May 23–26, pp 1–15, Soc. for the Advancement of Material and Process Engineering.
   Google Scholar
• Majdič, F., Velkavrh, I., and Kalin, M. (2013), “Improving the Performance of a Proportional 4/3 Water-Hydraulic Valve by Using a Diamond-Like-Carbon Coating,” Wear, 297(1–2), pp 1016–1024. doi:10.1016/j.wear.2012.11.060
   Web of Science ®Google Scholar
• Liu, X. Y., Nie, S. L., Li, G. H., and Yin, F. L. (2018), “Research on the Dynamic Characteristics of Seawater Hydraulic Cartridge-Type 4/3 Directional Valve,” Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40(11), pp 1–14. doi:10.1007/s40430-017-0934-2
   Google Scholar
• Yang, S. D., Li, Z. Y., and Zhu, Y. Q. (2000), “The Main Projects and Development Status of Raw Water Hydraulics,” China Mechanical Engineering, 11(9), pp 1070–1073.
   Google Scholar
• Yang, H. Y. and Zhou, H. (2002), “Some Key Problems of the Water Hydraulics,” Journal of Mechanical Engineering, 38(Suppl.), pp 96–100. doi:10.3901/JME.2002.supp.096
   Google Scholar
• Shao, X. G., Ma, J., Wu, Z. Y., Yuan, R. B., and Li, J. F. (2006), “Some Solved Problems in Water Hydraulics Technology,” Fluid Power Transmission and Control, 5, pp 45–46.
   Google Scholar
• Miyasaka, M. and Hayabusa, K. (2013), “Application Examples of Numerical Corrosion Analysis for Seawater Pump,” Zairyo-to-Kankyo/Corrosion Engineering, 62(10), pp 359–365. doi:10.3323/jcorr.62.359
   Google Scholar
• Czitrom, S. P. R., Godoy, R., Prado, E., Pérez, P., and Peralta-Fabi, R. (2000), “Hydrodynamics of an Oscillating Water Column Seawater Pump: Part I: Theoretical Aspects,” Ocean Engineering, 27(11), pp 1181–1198. doi:10.1016/S0029-8018(99)00040-2
   Web of Science ®Google Scholar
• Tang, Q. G., Li, Z. Y., and Zhang, T. H. (2003), “Application and Investigation of Engineering Ceramics in Water Power Components,” China Mechanical Engineering, 14(8), pp 717–720.
   Google Scholar
• Liu, Y. S., Yu, Z. Y., Tang, Q. G., and Li, Z. Y. (2003), “Applications of Surface Engineering Technology in Water Hydraulic Elements,” China Mechanical Engineering, 14(21), pp 1850–1853.
   Google Scholar
• Xiao, L. J., Yang, J. X., and Liang, R. (2009), “Key Technologies Solutions of Seawater Hydraulic Pump with Seawater Lubrication,” Lubrication Engineering, 34(2), pp 85–88.
   Google Scholar
• Zhai, J., Jin, C., Luo, K., and Zhou, H. (2011), “Performance Test & Application of an Axial Piston Pump for Seawater Desalination,” Machine Tool & Hydraulics, 39(17), pp 1–3, 36.
   Google Scholar
• Liu, Q., Ruan, J., Chen, L., and Nie, S. L. (2011), “Development of Bevel Axial Seawater Hydraulic Piston Pump,” Machine Tool & Hydraulics, 39(5), pp 62–63, 100.
   Google Scholar
• Avilés, M. D., Carrión, F. J., Sanes, J., and Bermúdez, M. D. (2018), “Effects of Protic Ionic Liquid Crystal Additives on the Water-Lubricated Sliding Wear and Friction of Sapphire against Stainless Steel,” Wear, 408–409, pp 56–64. doi:10.1016/j.wear.2018.04.015
   Web of Science ®Google Scholar
• Yin, F. L., Ji, H., and Nie, S. L. (2019), “Tribological Behavior of Various Ceramic Materials Sliding against CF/PTFE/Graphite Filled PEEK under Seawater Lubrication,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 233, pp 1729–1742. doi:10.1177/1350650119845743
   Web of Science ®Google Scholar
• Chen, W., Wang, Z. X., and Liu, X. (2020), “Effect of Load on the Friction and Wear Characteristics of Si3N4-Hbn Ceramic Composites Sliding against PEEK in Artificial Seawater,” Tribology International, 141, pp 105902. doi:10.1016/j.triboint.2019.105902
   Web of Science ®Google Scholar
• Gropper, D., Wang, L., and Harvey, T. J. (2016), “Hydrodynamic Lubrication of Textured Surfaces: A Review of Modeling Techniques and Key Findings,” Tribology International, 94, pp 509–529. doi:10.1016/j.triboint.2015.10.009
   Web of Science ®Google Scholar
• Vlădescu, S. C., Olver, A. V., Pegg, I. G., and Reddyhoff, T. (2016), “Combined Friction and Wear Reduction in a Reciprocating Contact through Laser Surface Texturing,” Wear, 358–359, pp 51–61. doi:10.1016/j.wear.2016.03.035
   Web of Science ®Google Scholar
• Zhang, J. H., Chen, Y., Xu, B., Chao, Q., Zhu, Y., and Huang, X. C. (2018), “Effect of Surface Texture on Wear Reduction of the Tilting Cylinder and the Valve Plate for a High-Speed Electro-Hydrostatic Actuator Pump,” Wear, 414–415, pp 68–78. doi:10.1016/j.wear.2018.08.003
   Google Scholar
• Salama, M. E. (1952), “The Effect of Microroughness on the Performance of Parallel Thrust Bearing,” Proceedings of the Institute of Mechanical Engineers, 163, pp 149–158. doi:10.1243/PIME_PROC_1950_163_019_02
   Google Scholar
• Hamilton, D. B., Walowit, J. A., and Allen, C. M. (1966), “A Theory of Lubrication by Micro-Irregularities,” Fluids Engineering, 88, pp 177–185. doi:10.1115/1.3645799
   Web of Science ®Google Scholar
• Anno, J. N., Walowit, J. A., and Allen, C. M. (1968), “Microasperity Lubrication,” Tribology, 90, pp 351–355. doi:10.1115/1.3601568
   Google Scholar
• Anno, J. N., Walowit, J. A., and Allen, C. M. (1969), “Load Support and Leakage from Microasperity-Lubricated Face Seals,” Tribology, 91, pp 726–731. doi:10.1115/1.3555030
   Google Scholar
• Etsion, I. and Burstein, L. (1996), “A Model for Mechanical Seals with Regular Microsurface Structure,” Tribology Transactions, 39, pp 677–683. doi:10.1080/10402009608983582
   Web of Science ®Google Scholar
• Etsion, I., Halperin, G., and Greenberg, Y. (1997), “Increasing Mechanical Seals Life with Laser-Textured Seal Faces,” Proceedings of 15th International Conference on Fluid Sealing, Maastricht, Netherlands, September 16–18, Vol. 26, pp 3–11, Mechanical Engineering Publishing Ltd.
   Google Scholar
• Etsion, I. and Kligerman, Y. (1999), “Analytical and Experimental Investigation of Laser-Textured Mechanical Seal Faces,” Tribology Transactions, 42(3), pp 511–516. doi:10.1080/10402009908982248
   Web of Science ®Google Scholar
• Etsion, I. (2005), “State of the Art in Laser Surface Texturing,” Journal of Tribology, 127, pp 248–253. doi:10.1115/1.1828070
   Web of Science ®Google Scholar
• Koszela, W., Pawlus, P., and Galda, L. (2007), “The Effect of Oil Pockets Size and Distribution on Wear in Lubricated Sliding,” Wear, 263, pp 1585–1592. doi:10.1016/j.wear.2007.01.108
   Web of Science ®Google Scholar
• Kango, S., Singh, D., and Sharma, R. K. (2012), “Numerical Investigation on the Influence of Surface Texture on the Performance of Hydrodynamic Journal Bearing,” Meccanica, 47, pp 469–482. doi:10.1007/s11012-011-9460-y
   Web of Science ®Google Scholar
• Ren, L. Q., Yang, Z. J., and Han, Z. W. (2005), “Non-Smooth Wearable Surfaces of Living Creatures and Their Bionic Application,” Transactions of the Chinese Society for Agricultural Machinery, 36(7), pp 144–147.
   Google Scholar
• Han, Z. W., Xu, X. X., and Ren, L. Q. (2005), “Regression Analysis of Micro-Friction and Wear on Concave Non-Smooth Surface,” Tribology, 25(6), pp 578–582.
   Google Scholar
• Liang, Y. H. and Ren, L.Q. (2016), “Preliminary Study of Habitat and Its Bionics,” Journal of Jilin University (Engineering and Technology Edition), 46(5), pp 1746–1756.
   Google Scholar
• Chen, G. N. (1997), “Roll Surface Roughing Method and Its Application,” Iron and Steel, 32(6), pp 65–69.
   Google Scholar
• Deng, B. Q., Ren, L. Q., Su, Y., Zhang, Y. P., and Liu, Z. M. (2004), “Tribological Study on Bionically Unsmoothed Surface Modeling Piston–Cylinder Friction Pair,” Journal of Jilin University (Engineering and Technology Edition), 34(1), pp 79–84.
   Google Scholar
• GB 17378.4-2007. (2008), “The Specifications for Marine Monitoring—Part 4: Seawater Analysis,” General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China, Standardization Administration of the People’s Republic of China: Beijing.
   Google Scholar
• Wen, S. Z., Huang, P., Tian, Y., and Ma, L. R. (2018), Principles of Tribology, Tsinghua University Press: Beijing.
   Google Scholar
• Liang, Y. N. and Gao, D. R. (2015), “Hydrodynamic Lubrication Calculation for Slipper/Swash Plate Pair with Bionic Non-Smooth Concave Surface,” Journal of Mechanical Engineering, 51(24), pp 153–160. doi:10.3901/JME.2015.24.153
   Google Scholar
• Myshkin, N. K., Petrokovets, M. I., and Kovalev, A. V. (2005), “Tribology of Polymers: Adhesion, Friction, Wear, and Mass-Transfer,” Tribology International, 38, pp 910–921. doi:10.1016/j.triboint.2005.07.016
   Web of Science ®Google Scholar
• Liang, Y. N., Gao, D. R., and Wu, S.F. (2017), “Tribological Performance of 316L Stainless Steel Sliding against CF/PEEK with Bionic Non-Smooth Surface under Seawater Lubricated Condition,” China Surface Engineering, 30(1), pp 115–124.
   Web of Science ®Google Scholar
• Huang, Y. P., Li, D. H., Wang, R., and Huang, W. (2004), “An Improvement Way of the Wet Ability between Particles and Aluminum Matrix among MMCP Produced by Casting,” Foundry Technology, 25(1), pp 17–18.
   Google Scholar
• Xu, H. and Jian, X. (2004), “Degassing of Aluminum Alloys using Ultrasonic Vibration,” Materials Letters, 58, pp 3669–3673. doi:10.1016/j.matlet.2004.02.055
   Web of Science ®Google Scholar
• Jia, J. H., Chen, J. M., Zhou, H. D., Yan, F. Y., and Zhou, H. (2004), “Comparative Study of Tribological Behavior of Carbon Fiber Reinforced Polytetrafluoroethylene Composites at Dry- and Water-Lubricated Sliding against Stainless Steel,” Tribology, 24(1), pp 16–20.
   Google Scholar