Evaluation of an Adhesive Friction Coefficient under Extreme Contact Conditions and Its Application to the Machining Process

References

• Ezugwu, E., Bonney, J., and Yamane, Y. (2003), “An Overview of the Machinability of Aeroengine Alloys,” Journal of Materials Processing Technology, 134(2), pp 233–253. doi:10.1016/S0924-0136(02)01042-7
   Web of Science ®Google Scholar
• Strenkowski, J. and Carroll, J., III. (1985), “Finite Element Model of Orthogonal Metal Cutting,” Journal of Engineering for Industry, 107(4), pp 349–354. doi:10.1115/1.3186008
   Google Scholar
• Movahhedy, M., Gadala, M., and Altintas, Y. (2000), “Simulation of Chip Formation in Orthogonal Metal Cutting Process: An ALE Finite Element Approach,” Machining Science and Technology, 4(1), pp 15–42.
   Web of Science ®Google Scholar
• Olsson, M., Soderberg, S., Jacobson, S., and Hogmark, S. (1989), “Simulation of Cutting Tool Wear by a Modified Pin-on-Disc Test,” International Journal of Machine Tools and Manufacture, 29(3), pp 377–390.
   Web of Science ®Google Scholar
• Narojczyk, J., Morozow, D., Narojczyk, J., and Rucki, M. (2018), “Ion Implantation of the Tool’s Rake Face for Machining of the Ti-6Al-4V Alloy,” Journal of Manufacturing Processes, 34, pp 274–280.
   Web of Science ®Google Scholar
• Karpat, Y. (2011), “Temperature Dependent Flow Softening of Titanium Alloy Ti6Al4V: An Investigation Using Finite Element Simulation of Machining,” Journal of Materials Processing Technology, 211(4), pp 737–749.
   Web of Science ®Google Scholar
• Arrazola, P., Ugarte, D., and Domínguez, X. (2008), “A New Approach for the Friction Identification during Machining through the Use of Finite Element Modeling,” International Journal of Machine Tools and Manufacture, 48(2), pp 173–183.
   Web of Science ®Google Scholar
• Molinari, A., Cheriguene, R., and Miguelez, H. (2011), “Numerical and Analytical Modeling of Orthogonal Cutting: The Link between Local Variables and Global Contact Characteristics,” International Journal of Mechanical Sciences, 53(3), pp 183–206.
   Web of Science ®Google Scholar
• Cotterell, M., Ares, E., Yanes, J., López, F., Hernandez, P., and Peláez, G. (2013), “Temperature and Strain Measurement during Chip Formation in Orthogonal Cutting Conditions Applied to Ti-6Al-4V,” Procedia Engineering, 63, pp 922–930.
   Google Scholar
• Zhou, F. (2014), “A New Analytical Tool-Chip Friction Model in Dry Cutting,” The International Journal of Advanced Manufacturing Technology, 70(1), pp 309–319.
   Web of Science ®Google Scholar
• Zorev, N. (1963), “Inter-Relationship between Shear Processes Occurring along Tool Face and Shear Plane in Metal Cutting,” International Research in Production Engineering, 49, pp 143–152.
   Google Scholar
• Grzesik, W., Zalisz, Z., and Nieslony, P. (2002), “Friction and Wear Testing of Multilayer Coatings on Carbide Substrates for Dry Machining Applications,” Surface and Coatings Technology, 155(1), pp 37–45.
   Web of Science ®Google Scholar
• Melkote, S., Grzesik, W., Outeiro, J., Rech, J., Schulze, V., Attia, H., Arrazola, P., M’Saoubi, R., and Saldana, C. (2017), “Advances in Material and Friction Data for Modelling of Metal Machining,” CIRP Annals, 66(2), pp 731–754.
   Web of Science ®Google Scholar
• Calamaz, M., Coupard, D., Nouari, M., and Girot, F. (2011), “Numerical Analysis of Chip Formation and Shear Localization Processes in Machining the Ti6Al4V Titanium Alloy,” International Journal of Advanced Manufacturing Technology, 52(9), pp 887–895.
   Web of Science ®Google Scholar
• Rech, J., Claudin, C., and D’Eramo, E. (2009), “Identification of a Friction Model—Application to the Context of Dry Cutting of an AISI 1045 Annealed Steel with a TiN-Coated Carbide Tool,” Tribology International, 42(5), pp 738–744.
   Web of Science ®Google Scholar
• Bonnet, C., Valiorgue, F., Rech, J., Claudin, C., Hamdi, H., Bergheau, J., and Gilles, P. (2008), “Identification of a Friction Model—Application to the Context of Dry Cutting of an AISI 316l Austenitic Stainless Steel with a TiN Coated Carbide Tool,” International Journal of Machine Tools and Manufacture, 48(11), pp 1211–1223.
   Web of Science ®Google Scholar
• Dou, W., Geng, X., and Xu, Z. (2019), “Experimental Investigation and Numerical Simulation of the Orthogonal Cutting Based on the Smoothed Particle Hydrodynamics Method,” Journal of Manufacturing Processes, 44, pp. 359–366.
   Web of Science ®Google Scholar
• Orra, K. and Choudhury, S. (2018), “Tribological Aspects of Various Geometrically Shaped Micro-Textures on Cutting Insert to Improve Tool Life in Hard Turning Process,” Journal of Manufacturing Processes, 31, pp 502–513.
   Web of Science ®Google Scholar
• Bahi, S., Nouari, M., Moufki, A., Mansori, M., and Molinari, A. (2011), “A New Friction Law for Sticking and Sliding Contacts in Machining,” Tribology International, 44(7-8), pp 764–771.
   Web of Science ®Google Scholar
• Ozlu, E., Budak, E., and Molinari, A. (2009), “Analytical and Experimental Investigation of Rake Contact and Friction Behavior in Metal Cutting,” International Journal of Machine Tools and Manufacture, 49(11), pp 865–875.
   Web of Science ®Google Scholar
• Atlati, S., Haddag, B., Nouari, M., and Zenasni, M. (2014), “Thermomechanical Modelling of the Tool-Workmaterial Interface in Machining and Its Implementation Using the ABAQUS VUINTER Subroutine,” International Journal of Mechanical Sciences, 87, pp 102–117.
   Web of Science ®Google Scholar
• Mane, S., Karagadde, S., and Joshi, S. (2019), “Characterisation of Friction at the Tool–Chip Interface for Orthogonal Cutting of Ti-6Al-4V Alloy,” Advances in Materials and Processing Technologies, 5, pp 191–1201
   Google Scholar
• Welsch, G., Boyer, R., and Collings, E. (1993), Materials Properties Handbook: Titanium Alloys, ASM International: Materials Park, OH.
   Google Scholar
• Pierson, H. (1996), Handbook of Refractory Carbides and Nitrides, William Andrew Publishing: Westwood, NJ.
   Google Scholar
• Thepsonthi, T. and Özel, T. (2013), “Experimental and Finite Element Simulation Based Investigations on Micro-Milling Ti-6Al-4V Titanium Alloy: Effects of CBN Coating on Tool Wear,” Journal of Materials Processing Technology, 213(4), pp 532–542.
   Web of Science ®Google Scholar
• Lesure, D. (2000), “Experimental Investigations of Material Models for Ti-6A1-4V and 2024-T3,” Technical Report 49, Lawrence Livermore National Laboratory. DOI:10.2172/11977.https://www.osti.gov/biblio/11977
   Google Scholar
• Vergne, C. (2001), Analyse de l’influence des Oxydes dans le Frottement d’une Fonte pour Outil de Travail à Chaud, Ph.D. Thesis, Ecole des Mines de Paris.
   Google Scholar
• Liu, C. and Guo, Y. (2000), “Finite Element Analysis of the Effect of Sequential Cuts and Tool-Chip Friction on Residual Stresses in a Machined Layer,” International Journal of Mechanical Sciences, 42(6), pp 1069–1086.
   Web of Science ®Google Scholar
• Sudeep, U., Pandey, R., and Tandon, N. (2013), “Effects of Surface Texturing on Friction and Vibration Behaviors of Sliding Lubricated Concentrated Point Contacts under Linear Reciprocating Motion,” Tribology International, 62, pp 198–207.
   Web of Science ®Google Scholar
• Laakso, S. V., Agmell, M., and Ståhl, J.-E. (2018), “The Mystery of Missing Feed Force—The Effect of Friction Models, Flank Wear and Ploughing on Feed Force in Metal Cutting Simulations,” Journal of Manufacturing Processes, 33, pp 268–277.
   Web of Science ®Google Scholar