Thermal Modeling of the FZG Test Rig: Application to Starved Lubrication Conditions

References

• Höhn, B. R., Michaelis, K., and Völlmer, T. (1996), “Thermal Rating of Drives: Balance between Power Loss and Heat Dissipation,” AGMA Technical Paper 96FTM08.
   Google Scholar
• Andersson, M., Sosa, M., and Olofsson, U. (2017), “Efficiency and Temperature of Spur Gears Using Spray Lubrication Compared to Dip Lubrication,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 231(11), pp 1390–1396. doi:10.1177/1350650117695709
   Web of Science ®Google Scholar
• Fernandes, C., Marques, P., Matins, R. C., and Seabra, J. (2014), “Gearbox Power Loss. Part II: Friction Losses in Gears,” Tribology International, 88, pp 309–316. doi:10.1016/j.triboint.2014.12.004
   Web of Science ®Google Scholar
• Höhn, B. R., Michaelis, K., and Doleschel A. (2001), “Frictional Behaviour of Synthetic Gear Lubricants,” Tribology Research: From Model Experiment to Industrial Problem, Dalmaz, G. (Ed.), pp 759–768, Elsevier Science B.V.: Amsterdam.
   Google Scholar
• Winter, H. and Michaelis, K. (1993, October), “Scoring Load Capacity of Gears Lubricated with EP-Oils,” AGMA, Fall Technical Meeting, Montreal, QC, Canada.
   Google Scholar
• Castro, J. and Seabra, J. (2008), “Global and Local Analysis of Gear Scuffing Tests Using a Mixed Film Lubrication Model,” Tribology International, 41, pp 244–255. doi:10.1016/j.triboint.2007.07.005
   Web of Science ®Google Scholar
• Matins, R. C., Cardoso, N. R., Bock, H., Igartua, A., and Seabra, J. H. O. (2009), “Power Loss Performance of High Pressure Nitrided Steel Gears,” Tribology International, 42(1), pp 1807–1815.  doi:10.1016/j.triboint.2009.03.006
   Google Scholar
• Martins, R. C., Seabra J., Brito, A., Seyfert, Ch., Luther, R., and Igartua, A. (2006), “FZG Coefficient in FZG Gears Lubricated with Industrial Gear Oils: Biodegradable Ester vs. Mineral Oil,” Tribology International, 39(1), pp 512–521.  doi:10.1016/j.triboint.2005.03.021
   Google Scholar
• Changenet, C., Oviedo-Marlot, X., and Velex, P. (2006), “Power Loss Predictions in Geared Transmissions Using Thermal Networks—Applications to a Six-Speed Manual Gearbox,” Journal of Mechanical Design, 128, pp 618–625. doi:10.1115/1.2181601
   Web of Science ®Google Scholar
• Durand de Gevigney, J., Changenet, C., Ville, F., and Velex, P. (2012), “Thermal Modelling of a Back-to-Back Gearbox Test Machine: Application to the FZG Test Rig,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 226(6), pp 501–515. doi:10.1177/1350650111433243
   Web of Science ®Google Scholar
• Chevalier, F., Lubrecht A. A., Cann, P. M. E., Colin, F. and Dalmaz, G. (1998), “Film Thickness in Starved EHL Point Contacts,” Transactions of the ASME, 120, pp 126–133. doi:10.1115/1.2834175
   Google Scholar
• Damiens, B., Venner, C. H., Cann, P. M. E., and Lubrecht, A. A. (2004), “Starved Lubrication of Elliptical EHD Contacts,” Journal of Tribology, 126, pp 105–111. doi:10.1115/1.1631020
   Web of Science ®Google Scholar
• Querlioz, E., Ville, F., Lenon, H., and Lubrecht, T. (2007), “Experimental Investigations on the Contact Fatigue Life under Starved Conditions,” Tribology International, 40, pp 1619–1626. doi:10.1016/j.triboint.2006.11.002
   Web of Science ®Google Scholar
• Meheux, M., Minfray, C., Ville, F., Le Mogne, T., Lubrecht, A. A., Martin, J. M., and Lieurade, H. P. (2008), “Influence of Slide-to-Roll Ratio on Tribofilm Generation,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 222(3), pp 325–334.
   Google Scholar
• Blok, H. (1970), “La Méthode des Réseaux Thermique pour le Calcul des Températures de Masse dans les Transmissions à Engrenages,” Société d’études de l'industrie de l'engrenage [Thermal network method applied to bulk temperatures calculation within gearboxes]," 59, pp 3–13.
   Google Scholar
• Neurouth, A., Changenet, C., Ville, F., and Michel, M. (2017), “Influence of Rolling Element Bearing Modelling on the Predicted Thermal Behavior of the FZG Test Rig,” Tribology Transactions, 60(4), pp 753–761. doi:10.1080/10402004.2016.1208856
   Web of Science ®Google Scholar
• Niel, D., Changenet, C., Ville, F., and Octrue, M. (2019), “Thermomechanical Study of High Speed Rolling Element Bearing: A Simplified Approach,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 233(4), pp 541–552. doi:10.1177/1350650117750806
   Web of Science ®Google Scholar
• ISO/TR 14179-2. (2001), “Gears, Thermal Capacity,” 1st Ed. https://www.iso.org/obp/ui/#iso:std:iso:tr:14179:-2:ed-1:v1:en (accessed August 2020).
   Google Scholar
• SKF, (2006, June), “Using a Friction Model as an Engineering Tool.” https://evolution.skf.com/us/using-a-friction-model-as-an-engineering-tool-2/ (accessed August 2020).
   Google Scholar
• Simrit, (2002),  Radialwellendichtringe Katalog , Radial Seals Catalog, p. 1061. https://www.fst.com/de/sealing/produkte/dynamische-dichtungen/radialwellendichtringe/, (accessed August 2020).
   Google Scholar
• LePrince, G., Changenet, C., Ville, F., Velex, P., Dufau, C., and Jarnias, F. (2011), “Influence of Aerated Lubricants on Gear Churning Losses—An Engineering Model,” Tribology Transactions, 54(6), pp 929–938. doi:10.1080/10402004.2011.597542
   Web of Science ®Google Scholar
• Schlichting, H. (1979), Boundary Layer Theory, 7th Ed., McGraw-Hill: New York, USA.
   Google Scholar