References
- Wang, Y. F., Wang, Y., Li, X., Li, A., Lu, Z. B., Zhang, G. G., and Wu, Z. G. (2019), “The Friction and Wear Properties of Metal-Doped DLC Films under Current-Carrying Condition,” Tribology Transactions, 62(6), pp 1119–1128.
- Izumi, T., Yagi, K., Koyamachi, J., Saito, K., Sanda, S., Yamaguchi, S., Ikehata, H., Yogo, Y., and Sugimura, J. (2018), “Surface Deteriorations during Scuffing Process of Steel and Analysis of Their Contribution to Wear Using In Situ Synchrotron X-ray Diffraction and Optical Observations,” Tribology Letters, 66(3), pp 1–20. doi:https://doi.org/10.1007/s11249-018-1062-6
- Zhu, D. M., Zhang, S. J., and Liu, G. Y. (2011), “Deformation Control in Wear-Resistant Steel Quenching Process,” Applied Mechanics and Materials, 52–54, pp 595–600. doi:https://doi.org/10.4028/www.scientific.net/AMM.52-54.595
- Yang, P. H., Fu, H. G., Zhao, X. W., Lin, J., and Lei, Y. P. (2019), “Wear Behavior of CADI Obtained at Different Austenitizing Temperatures,” Tribology International, 140, pp 1–12.
- Ojala, N., Valtonen, K., Antikainen, A., Kemppainen, A., Minkkinen, J., Oja, O., and Kuokkala, V. T. (2016), “Wear Performance of Quenched Wear Resistant Steels in Abrasive Slurry Erosion,” Wear, 354, pp 21–31.
- Jayashree, P., Bortolotti, M., Turani, S., and Straffelini, G. (2019), “High-Temperature Tribo-Oxidative Wear of a Cu-Based Metal-Matrix Composite Dry Sliding against Heat-Treated Steel,” Tribology Letters, 67, pp 1–12. doi:https://doi.org/10.1007/s11249-019-1227-y
- Falqueto, L. E., Butkus, D. J., De Mello, J. D. B., Bozzi, A. C., and Scandian, C. (2017), “Sliding Wear of Cobalt-Based Alloys Used in Rolling Seamless Tubes,” Wear, 376, pp 1739–1746.
- Vrcek, A., Hultqvist, T., Baubet, Y., Marklund, P., and Larsson, R. (2019), “Micro-Pitting Damage of Bearing Steel Surfaces under Mixed Lubrication Conditions: Effects of Roughness, Hardness and ZDDP Additive,” Tribology International, 138, pp 239–249. doi:https://doi.org/10.1016/j.triboint.2019.05.038
- Dalai, R., Das, S., and Das, K. (2019), “Effect of Thermo-Mechanical Processing on the Low Impact Abrasion and Low Stress Sliding Wear Resistance of Austenitic High Manganese Steels,” Wear, 420, pp 176–183.
- Lindroos, M., Ratia, V., Apostol, M., Valtonen, K., Laukkanen, A., Molnar, W., Holmberg, K., and Kuokkala, V. T. (2015), “The effect of impact conditions on the wear and deformation behavior of wear resistant steels,” Wear, 328–329, pp 197–205. doi:https://doi.org/10.1016/j.wear.2015.02.032
- Zambrano, O. A., Gómez, J. A., Coronado, J. J., and Rodríguez, S. A. (2019), “The Sliding Wear Behaviour of Steels with the Same Hardness,” Wear, 418, pp 201–207.
- Yasavol, N. and Ramalho, A. (2015), “Wear Properties of Friction Stir Processed AISI D2 Tool Steel,” Tribology International, 91, pp 177–183. doi:https://doi.org/10.1016/j.triboint.2015.07.001
- Seo, J. W., Kwon, S. J., Jun, H. K., and Lee, C. W. (2019), “Effects of Wheel Materials on Wear and Fatigue Damage Behaviors of Wheels/Rails,” Tribology Transactions, 62(4), pp 635–649. doi:https://doi.org/10.1080/10402004.2019.1588446
- Mendez, P. F., Barnes, N., Bell, K., Borle, S. D., Gajapathi, S. S., Guest, S. D., Izadia, H., Gola, A. K., and Wood, G. (2014). “Welding Processes for Wear Resistant Overlays,” Journal of Manufacturing Processes, 16(1), pp 4–25. doi:https://doi.org/10.1016/j.jmapro.2013.06.011
- Yi, Y.-l., Xing, J. D., Li, W., Liu, Y. Z., and Zheng, B. C. (2019), “Effect of Matrix Microstructure on Abrasive Wear Resistance of Fe–2 wt% B Alloy,” Tribology Transactions, 66(6), pp 971–978.
- Suo, Z. Y., Fu, L. M., Zhang, R. N., Wang, Y. J., and Shan, A. D. (2017), “Effect of Annealing Temperature and Time on Microstructure and Mechanical Properties of High Cr Ferritic Casting Steel,” IOP Conference Series: Materials Science and Engineering, 231(1), pp 1–6. doi:https://doi.org/10.1088/1757-899X/231/1/012131
- Wang, X. G. and Liang, A. G. (2015), “Wear Analysis and Counter Measures of Scraper Conveyor Central Groove and Scraper Chain,” Coal Mine Machinery, 36(5), pp 109–111.
- Shi, Z. Y. and Zhu, Z. C. (2017), “Case Study: Wear Analysis of the Middle Plate of a Heavy-Load Scraper Conveyor Chute under a Range of Operating Conditions,” Wear, 380–381, pp 36–41.
- Li, Z., Zhao, J. W., Jia, F. H., Zhang, Q. F., Liang, X. J., Jiao, S. H., and Jiang, Z. Y. (2019), “Numerical and Experimental Investigation on the Forming Behaviour of Stainless/Carbon Steel Bimetal Composite,” The International Journal of Advanced Manufacturing Technology, 101(1–4), pp 1075–1083. doi:https://doi.org/10.1007/s00170-018-2985-7
- Zhao, G. H., Ma, L. F., Huang, Q. X., Li, J., Zhi, C. C., and Cheng, M. H. (2018), “Microstructure Evolution and Recrystallization Analysis of Hot Rolled NM360/Q345R Composites,” Materials Research Express, 5(7), pp 1–7. doi:https://doi.org/10.1088/2053-1591/aab470
- Zhi, C. C., Ma, L. F., Huang, Q. X., Huang, Z. Q., and Liu, P. T. (2018), “Effect of Reduction on Bonding Interface of Hot-Rolled Wear-Resistant Steel BTW1/Q345R Cladding Plate,” Journal of Wuhan University of Technology-Materials Science Edition, 33(4), pp 952–958. doi:https://doi.org/10.1007/s11595-018-1918-5
- Zhao, H. Z., Feng, Y., Qian, G., Huang, X. C., Guo, S. S., and Sun, X. Y. (2019), “Effect of Ti3AlC2 Content on Electrical Friction and Wear Behaviors of Cu-Ti3AlC2 Composites,” Tribology Letters, 67(3), pp 1–12. doi:https://doi.org/10.1007/s11249-019-1211-6
- Li, J. F., Li, S., Zhu, Z. C., and Li, C. S. (2019), “Fabrication and Characterization of NbSe2/Ag Encapsulation and Tribological Properties of Its Correlated Copper-Based Composites,” Tribology Letters, 67(3), pp 1–16. doi:https://doi.org/10.1007/s11249-019-1191-6
- Wen, E. D., Song, R. B., and Xiong, W. M. (2019), “Effect of Tempering Temperature on Microstructures and Wear Behavior of a 500 HB Grade Wear-Resistant Steel,” Metals, 9(1), pp 1–14. doi:https://doi.org/10.3390/met9010045
- Liu, P. T., Huang, Q. X., Ma, L. F., and Wang, T. (2018), “Characterization of Hot Deformation Behavior of Wear-Resistant Steel BTW1 Using Processing Maps and Constitutive Equations,” Journal of Iron and Steel Research International, 25(10), pp 1054–1061. doi:https://doi.org/10.1007/s42243-018-0154-8
- Algodi, S. J., Murray, J. W., Brown, P. D., and Clare, A. T. (2018), “Wear Performance of TiC/Fe Cermet Electrical Discharge Coatings,” Wear, 402(1), pp 109–123. doi:https://doi.org/10.1016/j.wear.2018.02.007
- Hasan, M., Zhao, J., and Jiang, Z. (2019), “Micromanufacturing of Composite Materials: A Review,” International Journal of Extreme Manufacturing, 1(1), pp 1–26. doi:https://doi.org/10.1088/2631-7990/ab0f74
- Hu, J., Xin, L., Han, J., and Lu, Y. (2019), “Effect of Cold Rolling on the Fretting Wear Behavior and Mechanism in Inconel 690 Alloy,” Tribology Transactions, 62(2), pp 304–313. doi:https://doi.org/10.1080/10402004.2018.1551589
- Khanlari, K., Ramezani, M., Kelly, P., Cao, P., and Neitzert, T. (2019), “An Investigation on Reasons Causing Inferiority in Unlubricated Sliding Wear Performance of 60NiTi as Compared to 440C Steel,” Tribology Transactions, 62(1), pp 96–109. doi:https://doi.org/10.1080/10402004.2018.1516326
- Tan, H., Zhu, S., Wang, S., Yu, Y., Li, W., Yang, J., and Liu, W. (2018), “High-Temperature Tribological Behavior of Al-20Si-5Fe-2Ni/ZrB2 Composites,” Tribology Transactions, 61(6), pp 1107–1116. doi:https://doi.org/10.1080/10402004.2018.1480822
- Stanford, M. K. (2018), “Friction and Wear of Unlubricated NiTiHf with Nitriding Surface Treatments.” NAS/TM, 2, pp. 1–30.
- Cheng, X. W., Jiang, Z. Y., Wei, D. B., Wu, H., and Jiang, L. Z. (2019), “Adhesion, Friction and Wear Analysis of a Chromium Oxide Scale on a Ferritic Stainless Steel,” Wear, 426, pp 1212–1221.
- Lin, Y. C., Wu, X. Y., Chen, X. M., Chen, J., Wen, D. X., Zhang, J. L., and Li, L. T. (2015), “EBSD Study of a Hot Deformed Nickel-Based Superalloy,” Journal of Alloys and Compounds, 640, pp 101–113. doi:https://doi.org/10.1016/j.jallcom.2015.04.008
- Wang, X. Y., Wang, D. K., Jin, J. S., and Li, J. J. (2019), “Effects of Strain Rates and Twins Evolution on Dynamic Recrystallization Mechanisms of Austenite Stainless Steel,” Materials Science and Engineering: A, 166, pp 221–229. doi:https://doi.org/10.1016/j.msea.2019.138044
- Guglielmi, P. O., Ziehmer, M., and Lilleodden, E. T. (2018), “On a Novel Strain Indicator Based on Uncorrelated Misorientation Angles for Correlating Dislocation Density to Local Strength,” Acta Materialia, 150, pp 195–205. doi:https://doi.org/10.1016/j.actamat.2018.03.009