REFERENCES
- Ji, S., Fan, Z., Wan, L., and Zhang, J. (2000). “Moulding characteristics of sand mixture with partial vacuum suction techniques,” International Journal of Cast Metals Research, 13(3), pp 161–165. doi:https://doi.org/10.1080/13640461.2000.11819398
- Shukla, N., Roy, H., and Show, B. K. (2016). “Tribological Behavior of a 0.33% C Dual-Phase Steel with Pre I/C Hardening and Tempering Treatment under Abrasve Wear Condition,” Tribology Transactions, 59(4), 593–603.
- Trevisiol C., Jourani, A. and Bouvier, S. (2017). “Effect of Hardness, Microstructure, Normal Load and Abrasive Size On Friction and On Wear Behaviour of 35Ncd16 Steel,” Wear, 388-389, pp 101–111.
- Yigezu, B. S., Jha, P. K., and Mahapatra, M. M. (2013). “Effect of sliding distance, applied load, and weight percentage of reinforcement on the abrasive wear properties of in situ synthesized Al–12% Si/TiC composites,” Tribology Transactions, 56(4), pp 546–554.
- Coronado J. J., Rodríguez, S. A. and Sinatora, A. (2013). “Effect of Particle Hardness On Mild–Severe Wear Transition of Hard Second Phase Materials,” Wear, 301(1-2), pp 82–88. doi:https://doi.org/10.1016/j.wear.2012.12.016
- Xu X., Zwaag, S. V. D. and Xu, W. (2016). “The Effect of Martensite Volume Fraction On the Scratch and Abrasion Resistance of a Ferrite–Martensite Dual Phase Steel,” Wear, 348–349, pp 80–88.
- Jourani A, Bouvier S. (2015). “Friction and wear mechanisms of 316L stainless steel in dry sliding contact: effect of abrasive particle size,” Tribology Transactions, 58(1), pp 131–139. doi:https://doi.org/10.1080/10402004.2014.955229
- Trevisiol C., Jourani, A. and Bouvier, S. (2017). “Effect of Martensite Volume Fraction and Abrasive Particles Size On Friction and Wear Behaviour of a Low Alloy Steel,” Tribology International, 113, pp 411–425. doi:https://doi.org/10.1016/j.triboint.2016.11.001
- Zhang Z., Lin, P. and Ren, L. (2014). “Wear Resistance of Az91D Magnesium Alloy Processed by Improved Laser Surface Remelting,” Optics and Lasers in Engineering, 55, pp 237–242. doi:https://doi.org/10.1016/j.optlaseng.2013.11.014
- Chen Z. K., Zhou, T., Zhao, R. Y., Zhang, H. F., Lu, S. C., Yang, W. S. and Zhou, H. (2015). “Improved Fatigue Wear Resistance of Gray Cast Iron by Localized Laser Carburizing,” Materials Science & Engineering A, 644, pp 1–9.
- Wang Y., Liu, B. and Guo, Z. (2017). “Wear Resistance of Machine Tools' Bionic Linear Rolling Guides by Laser Cladding,” Optics & Laser Technology, 91, pp 55–62.
- Zhang D., Zhao, F., Li, Y., Li, P., Zeng, Q. and Dong, G. (2016). “Study On Tribological Properties of Multi-Layer Surface Texture On Babbitt Alloys Surface,” Applied Surface Science, 390, pp 540–549. doi:https://doi.org/10.1016/j.apsusc.2016.08.141
- Xing Y., Deng, J., Wu, Z. and Cheng, H. (2013). “Effect of Regular Surface Textures Generated by Laser On Tribological Behavior of Si3N4/Tic Ceramic,” Applied Surface Science, 265, pp 823–832. doi:https://doi.org/10.1016/j.apsusc.2012.11.127
- Dougherty, P. S., Srivastava, G., Onler, R., Ozdoganlar, O. B., and Higgs III, C. F. (2015). “Lubrication enhancement for UHMWPE sliding contacts through surface texturing,” Tribology Transactions, 58(1), pp 79–86. doi:https://doi.org/10.1080/10402004.2014.933935
- Han, J., Fang, L., Sun, J., Wang, Y., Ge, S., and Zhu, H. (2011). “Hydrodynamic lubrication of surfaces with asymmetric microdimple,” Tribology Transactions, 54(4), pp 607–615. doi:https://doi.org/10.1080/10402004.2011.584364
- Rahmani R. and Rahnejat, H. (2017). “Enhanced Performance of Optimised Partially Textured Load Bearing Surfaces,” Tribology International, 117, pp 272–282. doi:https://doi.org/10.1016/j.triboint.2017.09.011
- Chen P., Xiang, X., Shao, T., La, Y. and Li, J. (2016). “Effect of Triangular Texture On the Tribological Performance of Die Steel with Tin Coatings Under Lubricated Sliding Condition,” Applied Surface Science, 389, pp 361–368. doi:https://doi.org/10.1016/j.apsusc.2016.07.119
- Zhang, H., Hua, M., Dong, G., Zhang, D., and Chin, K. (2015). “A mixed lubrication model for studying tribological behaviors of surface texturing,” Tribology International, 93, pp 583–592. doi:https://doi.org/10.1016/j.triboint.2015.03.027
- Liew K. W., Kok, C. K. and Ervina Efzan, M. N. (2016). “Effect of Edm Dimple Geometry On Friction Reduction Under Boundary and Mixed Lubrication,” Tribology International, 101, pp 1–9. doi:https://doi.org/10.1016/j.triboint.2016.03.029
- Wang D. W., Mo, J. L., Liu, M. Q., Li, J. X., Ouyang, H., Zhu, M. H. and Zhou, Z. R. (2017). “Improving Tribological Behaviours and Noise Performance of Railway Disc Brake by Grooved Surface Texturing,” Wear, 376-377, pp 1586–1600.
- Zhang D., Ge, Y., Liu, G., Gao, F. and Li, P. (2018). “Investigation of Tribological Properties of Micro-Arc Oxidation Ceramic Coating On Mg Alloy Under Dry Sliding Condition,” Ceramics International,.44(14), pp 16164–16172.
- Arslan A., Masjuki, H. H., Varman, M., Kalam, M. A., Quazi, M. M., Al Mahmud, K. A. H., Gulzar, M. and Habibullah, M. (2015). “Effects of Texture Diameter and Depth On the Tribological Performance of Dlc Coating Under Lubricated Sliding Condition,” Applied Surface Science, 356, pp 1135–1149. doi:https://doi.org/10.1016/j.apsusc.2015.08.194
- Saeidi F., Meylan, B., Hoffmann, P. and Wasmer, K. (2016). “Effect of Surface Texturing On Cast Iron Reciprocating Against Steel Under Starved Lubrication Conditions: A Parametric Study,” Wear, 348, pp 17–26.
- Xing Y., Deng, J., Wu, Z. and Wu, F. (2017). “High Friction and Low Wear Properties of Laser-Textured Ceramic Surface Under Dry Friction,” Optics & Laser Technology, 93, pp 24–32.
- Wang W., He, Y., Zhao, J., Li, Y. and Luo, J. (2017). “Numerical Optimization of the Groove Texture Bottom Profile for Thrust Bearings,” Tribology International, 109, pp 69–77. doi:https://doi.org/10.1016/j.triboint.2016.12.006
- Biboulet N., Bouassida, H. and Lubrecht, A. A. (2015). “Cross Hatched Texture Influence On the Load Carrying Capacity of Oil Control Rings,” Tribology International, 82, pp: 12–19. doi:https://doi.org/10.1016/j.triboint.2014.09.024
- Tozetti K. D., Albertin, E. and Scandian, C. (2017). “Abrasive Size and Load Effects On the Wear of a 19.9% Chromium and 2.9% Carbon Cast Iron,” Wear, 376-377, pp 46–53.
- Yuan S., Huang, W. and Wang, X. (2011). “Orientation Effects of Micro-Grooves On Sliding Surfaces,” Tribology International, 44(9), pp 1047–1054.
- Lan P., Polychronopoulou, K., Zhang, Y. and Polycarpou, A. A. (2017). “Three-Body Abrasive Wear by (Silica) Sand of Advanced Polymeric Coatings for Tilting Pad Bearings,” Wear, 382-383, pp 40–50.
- Kaushik N. C. and Rao, R. N. (2016). “Effect of Grit Size On Two Body Abrasive Wear of Al 6082 Hybrid Composites Produced by Stir Casting Method,” Tribology International, 102, pp 52–60. doi:https://doi.org/10.1016/j.triboint.2016.05.015
- Singh R., Melkote, S. N. and Hashimoto, F. (2005). “Frictional Response of Precision Finished Surfaces in Pure Sliding,” Wear, 258(10), pp 1500–1509. doi:https://doi.org/10.1016/j.wear.2004.03.071