References
- Greenwood, J. A. and Williamson, J. P. (1966), “Contact of Nominally Flat Surfaces,” Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences , 295 , pp 300–319.
- Greenwood, J. A. and Tripp, J. H. (1970), “The Contact of Two Nominally Flat Rough Surfaces,” Proceedings of the Institution of Mechanical Engineers , 185 , pp 625–633. doi:https://doi.org/10.1243/PIME_PROC_1970_185_069_02
- Picard, M. , Tian, T. , and Nishino, T. (2016), “Predicting Gas Leakage in the Rotary Engine—Part I: Apex and Corner Seals,” Journal of Engineering for Gas Turbines and Power , 138 , pp 062503.
- Picard, M. , Tian, T. , and Nishino, T. (2016), “Predicting Gas Leakage in the Rotary Engine—Part II: Side Seals and Summary,” Journal of Engineering for Gas Turbines and Power , 138 , pp 062504.
- Gore, M. (2014), Measurement and Prediction of In-Cylinder Friction in Internal Combustion Engines , Doctoral Dissertation, Loughborough University.
- Sanda, S. , Murakami, M. , Noda, T. , and Konomi, T. (1997), “Analysis of Lubrication of a Piston Ring Package: Effect of Oil Starvation on Oil Film Thickness,” JSME International Journal Series B Fluids and Thermal Engineering , 40 , pp 478–486. doi:https://doi.org/10.1299/jsmeb.40.478
- Priestner, C. , Allmaier, H. , Priebsch, H. H. , and Forstner, C. (2012), “Refined Simulation of Friction Power Loss in Crank Shaft Slider Bearings Considering Wear in the Mixed Lubrication Regime,” Tribology International , 46 , pp 200–207. doi:https://doi.org/10.1016/j.triboint.2011.03.012
- Kazama, T. (2005), “Numerical Simulation of a Slipper Model for Water Hydraulic Pumps/Motors in Mixed Lubrication,” Proceedings of the JFPS International Symposium on Fluid Power , 2005 , pp 509–514. doi:https://doi.org/10.5739/isfp.2005.509
- Persson, B. N. J. (2001), “Elastoplastic Contact between Randomly Rough Surfaces,” Physical Review Letters , 87 , pp 116101.
- Persson, B. N. , Albohr, O. , Tartaglino, U. , Volokitin, A. I. , and Tosatti, E. (2004), “On the Nature of Surface Roughness with Application to Contact Mechanics, Sealing, Rubber Friction and Adhesion,” Journal of Physics: Condensed Matter , 17 , pp R1–R62.
- Müser, M. H. , Dapp, W. B. , and Greenwood, J. A. (2017), “Meeting the Contact-Mechanics Challenge,” Tribology Letters , 65 , pp 118.
- Tayebi, N. and Polycarpou, A. A. (2004), “Modeling the Effect of Skewness and Kurtosis on the Static Friction Coefficient of Rough Surfaces,” Tribology International , 37 , pp 491–505. doi:https://doi.org/10.1016/j.triboint.2003.11.010
- Elderton, W. P. and Johnson, N. L. (1969), Systems of Frequency Curves , Cambridge University Press: London.
- Tomota, T. , Kondoh, Y. , and Ohmori, T. (2019), “Modeling Solid Contact between Smooth and Rough Surfaces with Non-Gaussian Distributions,” Tribology Transactions , 62 , pp 580–591. doi:https://doi.org/10.1080/10402004.2019.1573341
- George, F. (2007), Johnson’s System of Distributions and Microarray Data Analysis , Doctoral Dissertation, University of South Florida.
- Ciavarella, M. , Greenwood, J. A. , and Paggi, M. (2008), “Inclusion of Interaction in the Greenwood and Williamson Contact Theory,” Wear , 265 , pp 729–734.
- Kogut, L. and Etsion, I. (2002), “Elastic–Plastic Contact Analysis of a Sphere and a Rigid Flat,” Journal of Applied Mechanics , 69 , pp 657–662. doi:https://doi.org/10.1115/1.1490373
- Patir, N. and Cheng, H. S. (1979), “Prediction of the Bulk Temperature in Spur Gears Based on Finite Element Temperature Analysis,” ASLE Transactions , 22 , pp 25–36. doi:https://doi.org/10.1080/05698197908982899
- Nayak, P. R. (1971), “Random Process Model of Rough Surfaces,” Journal of Lubrication Technology , 9 , pp 398–407. doi:https://doi.org/10.1115/1.3451608
- Greenwood, J. A. (2006), “A Simplified Elliptic Model of Rough Surface Contact,” Wear , 261 , pp 191–200.
- Sepehri, A. and Farhang, K. (2008), “On Elastic Interaction of Nominally Flat Rough Surfaces,” Journal of Tribology , 130 , pp 011014.
- Zhao, B. , Zhang, S. , Wang, P. , and Hai, Y. (2015), “Loading–Unloading Normal Stiffness Model for Power-Law Hardening Surfaces Considering Actual Surface Topography,” Tribology International , 90 , pp 332–342.
- Gao, Z. , Fu, W. , and Wang, W. (2019), “Normal Contact Damping Model of Mechanical Interface Considering Asperity Shoulder-to-Shoulder Contact and Interaction,” Acta Mechanica , 230 , pp 2413–2424. doi:https://doi.org/10.1007/s00707-019-02392-0
- Zhang, K. , Li, G. , Gong, J. Z. , and Zhang, M. (2019), “Normal Contact Stiffness of Rough Surfaces Considering Oblique Asperity Contact,” Advances in Mechanical Engineering , 11 . doi:https://doi.org/10.1177/1687814018824471
- Scaraggi, M. and Persson, B. N. (2015), “General Contact Mechanics Theory for Randomly Rough Surfaces with Application to Rubber Friction,” Journal of Chemical Physics , 143 , pp 224111.
- Etsion, I. (2010), “Revisiting the Cattaneo-Mindlin Concept of Interfacial Slip in Tangentially Loaded Compliant Bodies,” Journal of Tribology , 132 , pp 020801.
- Jackson, R. L. , Down, M. P. , Hong, L., and McBride, J. W., 2014, “A Comparison of the Predictions of a Multiscale Model and Optical Real Area of Contact Measurements,” IEEE 60th Holm Conference Electrical Contacts (Holm), New Orleans, LA, Oct. 12–15, IEEE: New Orleans, LA, pp. 1–8.
- Johnson, K. L. (1985), Contact Mechanics , Cambridge University Press: Cambridge, UK.
- Bush, A. W. , Gibson, R. D. , and Thomas, T. R. (1975), “The Elastic Contact of a Rough Surface,” Wear , 35 , pp 87–111. doi:https://doi.org/10.1016/0043-1648(75)90145-3
- Jeng, Y. (1998), “Characterizations of Surface Height Distributions,” Journal of the Chinese Society of Mechanical Engineers , 19 , pp 417–423.
- Zavarise, G. , Borri-Brunetto, M. , and Paggi, M. (2007), “On the Resolution Dependence of Micromechanical Contact Models,” Wear , 262 , pp 42–54. doi:https://doi.org/10.1016/j.wear.2006.03.044
- Yeo, C. D. , Katta, R. R. , Lee, J. , and Polycarpou, A. A. (2010), “Effect of Asperity Interactions on Rough Surface Elastic Contact Behavior: Hard Film on Soft Substrate,” Tribology International , 43 , pp 1438–1448. doi:https://doi.org/10.1016/j.triboint.2010.01.021
- Jackson, R. L. and Green, I. (2011), “On the Modeling of Elastic Contact between Rough Surfaces,” Tribology Transactions , 54 , pp 300–314. doi:https://doi.org/10.1080/10402004.2010.542277
- Goedecke, A. , Jackson, R. L. , and Mock, R. (2013), “A Fractal Expansion of a Three Dimensional Elastic–Plastic Multi-Scale Rough Surface Contact Model,” Tribology International , 59 , pp 230–239. doi:https://doi.org/10.1016/j.triboint.2012.02.004
- Yastrebov, V. A. , Anciaux, G. , and Molinari, J. F. (2015), “From Infinitesimal to Full Contact between Rough Surfaces: Evolution of the Contact Area,” International Journal of Solids and Structures , 52 , pp 83–102. doi:https://doi.org/10.1016/j.ijsolstr.2014.09.019
- Ju, Y. and Farris, T. N. (1996), “Spectral Analysis of Two-Dimensional Contact Problems,” Journal of Tribology , 118 , pp 320–328. doi:https://doi.org/10.1115/1.2831303
- Ju, Y. and Farris, T. N. (1997), “FFT Thermoelastic Solutions for Moving Heat Sources,” Journal of Tribology , 119 , pp 156–162. doi:https://doi.org/10.1115/1.2832452
- Liu, S. , Wang, Q. , and Liu, G. (2000), “A Versatile Method of Discrete Convolution and FFT (DC-FFT) for Contact Analyses,” Wear , 243 , pp 101–111.
- Polonsky, I. A. and Keer, L. M. (1999), “A Numerical Method for Solving Rough Contact Problems Based on the Multi-Level Multi-Summation and Conjugate Gradient Techniques,” Wear , 231 , pp 206–219.
- Ausloos, M. and Berman, D. H. (1985), “A Multivariate Weierstrass-Mandelbrot Function,” Proceedings of the Royal Society of London A: Mathematical, Physical and Sciences , 400 , pp 331–350.
- Ciavarella, M. , Demelio, G. , Barber, J. R. , and Jang, Y. H. (2000), “Linear Elastic Contact of the Weierstrass Profile,” Proceedings of the Royal Society of London A: Mathematical, Physical and Sciences , 456 , pp 387–405. doi:https://doi.org/10.1098/rspa.2000.0522
- Gu, X. and Huang, Y. (1990), “The Modelling and Simulation of a Rough Surface,” Wear , 137 , pp 275–285.
- Wu, J. J. (2000), “Simulation of Rough Surfaces with FFT,” Tribology International , 33 , pp 47–58. doi:https://doi.org/10.1016/S0301-679X(00)00016-5
- Xu, Y. , Jackson, R. L. , and Marghitu, D. B. (2014), “Statistical Model of Nearly Complete Elastic Rough Surface Contact,” International Journal of Solids and Structures , 51 , pp 1075–1088. doi:https://doi.org/10.1016/j.ijsolstr.2013.12.005
- Johnson, K. L. , Greenwood, J. A. , and Poon, S. Y. (1972), “A Simple Theory of Asperity Contact in Elastohydro-Dynamic Lubrication,” Wear , 19 , pp 91–108.
- McCool, J. I. (1987), “Relating Profile Instrument Measurements to the Functional Performance of Rough Surfaces,” Journal of Tribology , 109 , pp 264–270. doi:https://doi.org/10.1115/1.3261349
- Carbone, G. and Bottiglione, F. (2008), “Asperity Contact Theories: Do They Predict Linearity between Contact Area and Load?,” Journal of the Mechanics and Physics of Solids , 56 , pp 2555–2572. doi:https://doi.org/10.1016/j.jmps.2008.03.011
- Chang, W. R. , Etsion, I. , and Bogy, D. B. (1987), “An Elastic–Plastic Model for the Contact of Rough Surfaces,” Journal of Tribology , 109 , pp 257–263. doi:https://doi.org/10.1115/1.3261348
- Wang, Z. Q. and Wang, J. F. (2017), “Model for a Sphere–Flat Elastic–Plastic Adhesion Contact,” Journal of Tribology , 139 , pp 041401.