References
- San Andrés, L. (2010), “Modern Lubrication Theory, Notes 15: Gas Film Lubrication,” Available at: http://oaktrust.library.tamu.edu/handle/1969.1/93197 (accessed August 31, 2020).
- Zhu, X. H. and San Andrés, L. S. (2007), “Rotordynamic Performance of Flexure Pivot Hydrostatic Gas Bearings for Oil-Free Turbomachinery,” Journal of Engineering for Gas Turbines and Power, 129(4), pp 1020–1027. doi:https://doi.org/10.1115/1.2720518
- Kim, D. and Rimpel, A. (2009), “Experimental and Analytical Studies on Flexure Pivot Tilting Pad Gas Bearings with Dampers Applied to Radially Compliant Pads,” Journal of Tribology, 131(4), pp 041001. doi:https://doi.org/10.1115/1.3201831
- Devitt, D. (2018), “Technical Report 1—Orifice vs. Porous Media Air Bearings,” Available at: http://newwayairbearings.com/technology/technical-resources/new-way-techincal-reports/technical-report-1-orifice-vs-porous-media-air-bearings (accessed June 7, 2020).
- Montgomery, A. G. and Sterry, F. (1955), “A Simple Air Bearing Rotor for Very High Rotating Speeds,” United Kingdom Atomic Energy Research Establishment, Harwell, UK, Technical Report No. AERE-ED/R-1671.
- Sheinberg, S. A. and Shuster, V. G. (1960), “Resistance to Vibrations of a Hydrostatic Thrust Seal,” Machines and Tooling, 31(11), pp 24–32.
- San Andrés, L. (2010), “Modern Lubrication Theory, Notes 12(b): Hydrostatic Lubrication,” Available at: http://oaktrust.library.tamu.edu/handle/1969.1/93197 (accessed August 31, 2020).
- Heller, S., Shapiro, W., and Decker, O. (1971), “A Porous Hydrostatic Gas Bearing for Use in Miniature Turbomachinery,” ASLE Transactions, 14(2), pp 144–155. doi:https://doi.org/10.1080/05698197108983236
- Rao, N. S. (1977), “Analysis of the Stiffness and Damping Characteristics of an Externally Pressurized Porous Gas Journal Bearing,” Journal of Lubrication Technology, 99(2), pp 295–301. doi:https://doi.org/10.1115/1.3453085
- Rao, N. S. (1979), “Design of Externally Pressurized Porous Gas Bearings with Journal Rotation,” Wear, 52(1), pp 1–11. doi:https://doi.org/10.1016/0043-1648(79)90191-1
- Lee, C. C. and You, H. I. (2009), “Characteristics of Externally Pressurized Porous Gas Bearings Considering Structure Permeability,” Tribology Transactions, 52(6), pp 768–776. doi:https://doi.org/10.1080/10402000903097403
- Feng, K., Wu, Y., Liu, W., Zhao, X., and Li, W. (2018), “Theoretical Investigation on Porous Tilting Pad Bearings Considering Tilting Pad Motion and Porous Material Restriction,” Precision Engineering, 53, pp 26–37. doi:https://doi.org/10.1016/j.precisioneng.2018.02.010
- Miyatake, M., Yoshimoto, S., and Sato, J. (2005), “Whirling Instability of a Rotor Supported by Aerostatic Porous Journal Bearings with a Surface-Restricted Layer,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 220(2), pp 95–103.
- Hwang, P. (2013), “Pneumatic Hammer,” Encyclopedia of Tribology, pp 2545–2548, Springer: Berlin/Heidelberg, Germany.
- San Andrés, L. (2010), “Modern Lubrication Theory, Notes 16: An Overview of Tilting Pad Journal Bearings,” Available at: http://oaktrust.library.tamu.edu/handle/1969.1/93197 (accessed August 31, 2020).
- San Andrés, L. and Tao, Y. (2013), “The Role of Pivot Stiffness on the Dynamics Force Coefficients of Tilting Pad Journal Bearings,” Journal of Engineering for Gas Turbines and Power, 135(11), pp 112505. doi:https://doi.org/10.1115/1.4025070
- New Way Air Bearings. (2006), “Air Bearing Application and Design Guide,” Revision E.
- San Andrés, L., Jeung, S.-H., Rohmer, M., and Devitt, D. (2015), “Experimental Assessment of Drag and Rotordynamic Response for a Porous Type Gas Bearing,” Extended Abstract, STLE Annual Meeting, Dallas, TX, May 17–21.
- San Andrés, L., Cable, A. T., Zheng, Y., De Santiago, O., and Devitt, D. (2016), “Assessment of Porous Type Gas Bearings: Measurements of Bearing Performance and Rotor Vibrations,” ASME Paper GT2016-57876. doi:https://doi.org/10.1115/GT2016-57876
- Liu, W., Feng, K., Huo, Y., and Guo, Z. (2018), “Measurements of the Rotordynamic Response of a Rotor Supported on Porous Type Gas Bearing,” Journal of Engineering for Gas Turbines and Power, 140(10), p 102501. doi:https://doi.org/10.1115/1.4039730
- Bohle, M. (2018), “Numerical Investigation of the Flow in Hydrostatic Journal Bearings with Porous Materials,” Proceedings of the ASME 2018 5th Joint U.S.–European Fluids Engineering Division Summer Meeting, Montreal, QC, Canada, July 15–20.
- Lawrence, T. and Kemple, M. (2019), “Numerical Method for Studying Bearing Gap pressure Wave Development and Subsequent Performance Mapping of Externally Pressurized Gas Journal Bearings,” Proceedings of the ASME–JSME–KSME 8th Joint Fluids Engineering Conference, San Francisco, CA, July 28–August 1. doi:https://doi.org/10.1115/AJKFluids2019-4732
- San Andrés, L., Jeung, S., and Devitt, D. (2015), “Carbon–Graphite Gas Bearings for Turbomachinery,” Proceedings of the 30th American Society for Precision Engineering Annual Meeting, ASPE, Austin, TX, November 01–06, pp 218–222.
- Belforte, G., Raparelli, T., Viktorov, V., and Trivella, A. (2007), “Permeability and Inertial Coefficients of Porous Media for Air Bearing Feeding Systems,” Journal of Tribology, 129, pp 705–711. doi:https://doi.org/10.1115/1.2768068
- XLTRC2® Rotordynamics Software Suite v. 3.1. (2019), Turbomachinery Laboratory, Texas A&M University, College Station, TX.
- Ginsberg, J. H. (2001), Mechanical and Structural Vibrations: Theory and Applications, Wiley, Hoboken, NJ.
- San Andrés, L. (2006), “Hybrid Flexure Pivot–Tilting Pad Gas Bearings: Analysis and Experimental Validation,” Journal of Tribology, 128(3), pp 551–558.