A Methodology to Measure Power Losses of Rolling Element Bearings under Combined Radial and Axial Loading Conditions

References

• Li, S., Kahraman, A., Anderson, N., and Wedeven, L. D. (2013), “A Model to Predict Scuffing Failures of a Ball-on-Disk Contact,” Tribology International, 60, pp 233–245. doi:10.1016/j.triboint.2012.11.007
   Web of Science ®Google Scholar
• Handschuh, M., Li, S., Kahraman, A., and Talbot, D. (2020), “An Experimental and Theoretical Methodology to Develop Scuffing Limits for Relatively Smooth High-Speed Contacts,” Tribology Transactions, 63(5), pp 781–795. doi:10.1080/10402004.2020.1715519
   Web of Science ®Google Scholar
• Rosander, P., Bednarek, G., Seethharaman, S., and Kahraman, A. (2008), “Development of an Efficiency Model for Manual Transmission,” Automobiltechnische Zeitschrift (ATZ), 110, pp 346–357. doi:10.1007/BF03221974
   Google Scholar
• Dindar, A., Chaudhury, K., Hong, I., Kahraman, A., and Wink, C. (2021), “An Experimental Methodology to Determine Components of Power Losses of a Gearbox,” ASME Journal of Tribology, 143(11), pp 111203. doi:10.1115/1.4049940
   Google Scholar
• Talbot, D., Kahraman, A., Li, S., Singh, A., and Xu, H. (2016), “Development and Validation of an Automotive Axle Power Loss Model,” Tribology Transactions, 59(4), pp 707–719. doi:10.1080/10402004.2015.1110862
   Web of Science ®Google Scholar
• Xu, H., Singh, A., Kahraman, A., Hurley, J., and Shon, S. (2012), “Effects of Bearing Prelaod, Oil Volume and Operating Temperature on Axle Power Losses,” Journal of Mechanical Design, 134(5), pp 054501. doi:10.1115/1.4006325
   Web of Science ®Google Scholar
• Seetharaman, S. and Kahraman, A. (2009), “Load-Independent Power Losses of a Spur Gear Pair: Model Formulation,” Journal of Tribology, 131(2), pp 022201. doi:10.1115/1.3085943
   Web of Science ®Google Scholar
• Seetharaman, S., Kahraman, A., Moorhead, M., and Perty-Johnson, T. (2009), “Load-Independent Power Losses of a Spur Gear Pair: Experiments and Model Validation,” Journal of Tribology, 131(2), pp 022202. doi:10.1115/1.3085943
   Web of Science ®Google Scholar
• Seetharaman, S. and Kahraman, A. (2010), “A Windage Power Loss Model for Spur Gear Pairs,” Tribology Transactions, 53(4), pp 473–484. doi:10.1080/10402000903452848
   Web of Science ®Google Scholar
• Gorla, C., Concli, F., Stahl, K., Höhn, B.-R., Klaus, M., Schultheiß, H., and Stemplinger, J-P. (2012), “CFD Simulations of Splash Losses of a Gearbox,” Advances in Tribology, 2012, pp 616923. doi:10.1155/2012/616923
   Google Scholar
• Concli, F., Gorla, C., Della Torre A., and Montenegro G. (2015), “Churning Power Losses of Ordinary Gears: A New Approach Based on the Internal Fluid Dynamics Simulations,” Lubrication Science, 27(5), pp 313–326. doi:10.1002/ls.1280
   Web of Science ®Google Scholar
• Talbot, D., Kahraman, A., and Seetharaman, S. (2014), “A Helical Gear Pair Pocketing Power Loss Model,” Journal of Tribology, 136(2), pp 021105. doi:10.1115/1.4026502
   Web of Science ®Google Scholar
• Li. S. and Kahraman, A. (2011), “A Method to Derive Friction and Rolling Power Loss Formulae for Mixed Elastohydrodynamic Lubrication,” Journal of Advanced Mechanical Design, Systems, and Manufacturing, 5(4), pp 252–263. doi:10.1299/jamdsm.5.252
   Web of Science ®Google Scholar
• Li, S., Vaidyanathan, A., Harianto, J., and Kahraman, A. (2009), “Influence of Design Parameters on Mechanical Power Losses of Helical Gear Pairs,” Journal of Advanced Mechanical Design, Systems, and Manufacturing, 3(2), pp 146–158. doi:10.1299/jamdsm.3.146
   Web of Science ®Google Scholar
• Xu, H., Kahraman, A., Anderson, N. E., and Maddock, D. (2007), “Prediction of Mechanical Efficiency of Parallel-Axis Gear Pairs,” Mechanisms and Machine Theory, 129, pp 58–68. doi:10.1115/1.2359478
   Google Scholar
• Dowson, D. and Higginson, G. R. (1964), “A Theory of Involute Gear Lubrication,” Proceedings of the Institute of Petroleum Symposium on Gear Lubrication. London: Institute of Petroleum.
   Google Scholar
• Martin, K. F. (1981), “The Efficiency of Involute Spur Gears,” Journal of Mechanical Design, 103, pp 160–169. doi:10.1115/1.3254855
   Web of Science ®Google Scholar
• Wu, S. and Cheng, H., S. (1991), “A Friction Model of Partial-EHL Contacts and Its Application to Power Loss in Spur Gears,” Tribology Transactions, 34(3), pp 398–407. doi:10.1080/10402009108982050
   Web of Science ®Google Scholar
• Akbarzadeh, S. and Khonsari, M. M. (2008), “Performance of Spur Gears Considering Surface Roughness and Shear Thinning Lubricant,” Journal of Tribology, 130(2), pp 021503. doi:10.1115/1.2805431
   Web of Science ®Google Scholar
• Larsson, R. (1997), “Transient Non-Newtonian Analysis of an Involute Spur Gear,” Wear, 207(1), pp 67–73. doi:10.1016/S0043-1648(96)07484-4
   Web of Science ®Google Scholar
• Wang, Y., Li, H., Tong, J., and Yang, P. (2004), “Transient Thermoelastohydrodynamic Lubrication Analysis of an Involute Spur Gear,” Tribology International, 37(10), pp 773–782. doi:10.1016/j.triboint.2004.04.005
   Web of Science ®Google Scholar
• Li, S. and Kahraman, A. (2011), “Influence of Dynamic Behavior on Elastohydrodynamic Lubrication of Spur Gears,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 225, pp 740–753. doi:10.1177/1350650111409517
   Web of Science ®Google Scholar
• Li, S. and Kahraman, A. (2010), “Prediction of Spur Gear Mechanical Power Losses Using a Transient Elastohydrodynamic Lubrication Model,” Tribology Transactions, 53(4), pp 554–563. doi:10.1080/10402000903502279
   Web of Science ®Google Scholar
• Li, S. and Kahraman, A. (2013), “A Tribo-Dynamic Model of a Spur Gear Pair,” Journal of Sound and Vibration, 332(20), pp 4963–4978. doi:10.1016/j.jsv.2013.04.022
   Web of Science ®Google Scholar
• Harris, T. (1973), “Rolling Element Bearing Dynamics,” Wear, 23(3), pp 311–337. doi:10.1016/0043-1648(73)90020-3
   Web of Science ®Google Scholar
• Palmgren, A. (1959), Ball and Roller Bearing Engineering, 3rd Ed., SKF Industries: Philadelphia.
   Google Scholar
• Gentle, C. R. and Pasdari, M. (1985), “Measurement of Cage and Pocket Friction in a Ball Bearing for Use in a Simulation Program,” ASLE Transactions, 28(4), pp 536–541. doi:10.1080/05698198508981652
   Web of Science ®Google Scholar
• Pouly, F., Changenet, C., Ville, F., Velex, P., and Damiens, B. (2010), “Power Loss Predictions in High-Speed Rolling Element Bearings Using Thermal Networks,” Tribology Transactions, 53, pp 957–967. doi:10.1080/10402004.2010.512117
   Web of Science ®Google Scholar
• Takabi, J. and Khonsari, M. M. (2013), “Experimental Testing and Thermal Analysis of Ball Bearings,” Tribology International, 60, pp 93–103. doi:10.1016/j.triboint.2012.10.009
   Web of Science ®Google Scholar
• Townsend, D. P., Allen, C. W., and Zaretsky, E. V. (1974), “Study of Ball Bearing Torque under Elastohydrodynamic Lubrication,” Journal of Lubrication Technology, 96, pp 561–571. doi:10.1115/1.3452491
   Web of Science ®Google Scholar
• Cousseau, T., Graca, B., Campos, A., and Seabra, J. (2010), “Experimental Measuring Procedure for the Friction Torque in Rolling Bearings,” Lubrication Science, 22(4), pp 133–147. doi:10.1002/ls.115
   Web of Science ®Google Scholar
• Fernandes, C. M. C. G., Marques, P. M. T., Martins, R. C., and Seabra, J. H. O. (2015), “Gearbox Power Loss. Part I: Losses in Rolling Bearings,” Tribology International, 88, pp 298–308. doi:10.1016/j.triboint.2014.11.017
   Web of Science ®Google Scholar
• Witte, D. C. (1973), “Operating Torque of Tapered Roller Bearings,” ASLE Transactions, 16, pp 61–67. doi:10.1080/05698197308982705
   Google Scholar
• Aihara, S. (1987), “A New Running Torque Formula for Tapered Roller Bearings under Axial Load,” Journal of Tribology, 109, pp 471–478. doi:10.1115/1.3261475
   Web of Science ®Google Scholar
• Zhou, R. S. and Hoeprich, M. R. (1991), “Torque of Tapered Roller Bearings,” Journal of Tribology, 113, pp 590–597. doi:10.1115/1.2920664
   Web of Science ®Google Scholar
• Gradu, M. (2000), “Tapered Roller Bearings with Improved Efficiency and High Power Density for Automotive Transmissions,” SAE Paper No. 2000-01-1154.
   Google Scholar
• Spindler, D. and von Petery, G. (2003), “Angular Contact Ball Bearings for a Rear Axle Differential,” SAE Paper No. 2003-01-3743.
   Google Scholar
• Feltman, J., Gradu, M., and Ross, S. (2005), “Advanced Bearing Solutions for Enhancing the Fuel Efficiency and Improving the Noise, Vibration and Harshness Behaviour of Modern Automotive Driveline Applications,” SAE Paper No. 2005-01-1896.
   Google Scholar
• Bandi, K. (2012), “Fuel Efficiency Improvements in Heavy Truck Driveline Systems through Advanced Bearing Design and Technology,” SAE Paper No. 2012-36-0204.
   Google Scholar
• Zwick, M. (2014), “Fuel Efficiency Improvements in Heavy Truck Wheel Systems through Advanced Bearing Design and Technology,” SAE International Journal of Commercial Vehicles, 7(2), pp 432–440.
   Google Scholar