References
- Archard, J. F. and Hirst, W. (1956), “The Wear of Metals under Unlubricated Conditions,” Proceedings of the Royal Society of London A, 236, pp 397–410.
- Lancaster, J. K. (1963), “The Formation of Surface Films at the Transition between Mild and Severe Metallic Wear,” Proceedings of the Royal Society of London - Series A: Mathematical and Physical Sciences, 273(1355), pp 466–483.
- Stott, F. H. and Wood, G. C. (1978), “The Influence of Oxides on the Friction and Wear of Alloys,” Tribology International, 11(4), pp 211–218. doi:https://doi.org/10.1016/0301-679X(78)90178-0
- Lim, S. C., Ashby, M. F., and Brunton, J. H. (1987), “Wear-Rate Transitions and Their Relationship to Wear Mechanisms,” Acta Metallurgica, 35(6), pp 1343–1348. doi:https://doi.org/10.1016/0001-6160(87)90016-2
- Quinn, T. F. J. (1962), “Role of Oxidation in the Mild Wear of Steel,” British Journal of Applied Physics, 13(1), pp 33–37. doi:https://doi.org/10.1088/0508-3443/13/1/308
- Hirst, W. and Lancaster, J. K. (1956), “Surface Film Formation and Metallic Wear,” Journal of Applied Physics, 27(9), pp 1057–1065. doi:https://doi.org/10.1063/1.1722541
- Hutchings, I. Shipway, P., Lawrence, L. (Eds.) (2017), “Fundamentals of Corrosion and Tribocorrosion,” Tribology, 2nd Ed., pp 361, Oxford, UK, Cambridge, MA: Butterworth-Heinemann.
- Stott, F. H. (1998), “The Role of Oxidation in the Wear of Alloys,” Tribology International, 31(1–3), pp 61–71. doi:https://doi.org/10.1016/S0301-679X(98)00008-5
- Lim, S. C. (2002), “The Relevance of Wear-Mechanism Maps to Mild-Oxidational Wear,” Tribology International, 35, pp 717–723. doi:https://doi.org/10.1016/S0301-679X(02)00033-6
- Quinn, T. F. J., Rowson, D. M., and Sullivan, J. L. (1980), “Application of the Oxidational Theory of Mild Wear to the Sliding Wear of Low Alloy Steel,” Wear, 65(1), pp 1–20. doi:https://doi.org/10.1016/0043-1648(80)90002-2
- Zhang, T. C., Jiang, X. X., Li, S. Z., and Lu, X. C. (1994), “A Quantative Estimation of the Synergy between Corrosion and Abrasion,” Corrosion Science, 36(12), pp 1953–1962. doi:https://doi.org/10.1016/0010-938X(94)90001-9
- Jiang, X. X., Li, S. Z., Tao, D. D., and Yang, J. X. (1993), “Accelerative Effect of Wear on Corrosion of High-Alloy Stainless Steel,” Corrosion, 49(10), pp 536–841. doi:https://doi.org/10.5006/1.3316007
- Madsen, B. W. and Adler, T. A. (1994), “Passivation and Repassivation Kinetics of Iron–Aluminum Alloys in 1 N H2SO4 Using Potential Step and Scratch Tests,” Wear, 171(1–2), pp 215–225. doi:https://doi.org/10.1016/0043-1648(94)90365-4
- Stott, F. H., Breakell, J. E., and Newman, R. C. (1990), “The Corrosive Wear of Cast Iron under Potentiostatically-Controlled Conditions in Sulphuric Acid Solutions,” Corrosion Science, 30(8–9), pp 813–830. doi:https://doi.org/10.1016/0010-938X(90)90005-P
- García, I., Drees, D., and Celis, J. P. (2001), “Corrosion–Wear of Passivating Materials in Sliding Contacts Based on a Concept of Active Wear Track Area,” Wear, 249(5–6), pp 452–460. doi:https://doi.org/10.1016/S0043-1648(01)00577-4
- Ponthiaux, P., Wenger, F., Drees, D., and Celis, J. P. (2004), “Electrochemical Techniques for Studying Tribocorrosion Processes,” Wear, 256(5), pp 459–468. doi:https://doi.org/10.1016/S0043-1648(03)00556-8
- Mischler, S. (2008), “Triboelectrochemical Techniques and Interpretation Methods in Tribocorrosion: A Comparative Evaluation,” Tribology International, 41(7), pp 573–583. doi:https://doi.org/10.1016/j.triboint.2007.11.003
- Watson, S. W., Friedersdorf, F. J., Madsen, B. W., and Cramer, S. D. (1995), “Methods of Measuring Wear–Corrosion Synergism,” Wear, 181–183(Part 2), pp 476–484. doi:https://doi.org/10.1016/0043-1648(95)90161-2
- Landolt, D., Mischler, S., and Stemp, M. (2001), “Electrochemical Methods in Tribocorrosion: A Critical Appraisal,” Electrochimica Acta, 46(24–25), pp 3913–3929. doi:https://doi.org/10.1016/S0013-4686(01)00679-X
- Blau, P. J. (2019), “An Editor’s Perspective on the Quality and Content of Wear Research Manuscripts,” Wear, 426–427, pp 1384–1390.
- Huttunen-Saarivirta, E., Kilpi, L., Hakala, T. J., Carpen, L., and Ronkainen, H. (2016), “Tribocorrosion Study of Martensitic and Austenitic Stainless Steels in 0.01 M NaCl Solution,” Tribology International, 95, pp 358–371. doi:https://doi.org/10.1016/j.triboint.2015.11.046
- Zhang, B., Wang, J., Zhang, Y., Han, G., and Yan, F. (2016), “Comparison of Tribocorrosion Behavior between 304 Austenitic and 410 Martensitic Stainless Steels in Artificial Seawater,” RSC Advances, 6(109), pp 107933–107941.
- López-Ortega, A., Arana, J. L., and Bayón, R. (2020), “On the Comparison of the Tribocorrosion Behavior of Passive and Non-Passivating Materials and Assessment of the Influence of Agitation,” Wear, pp 456–457.
- BSI Standards Online. (2019), “BS EN ISO 945-1:2019 BSI Standards Publication: Microstructure of Cast Irons.”
- ASTM G99-17. (2017), Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus, West Conshohocken, PA: ASTM International. www.astm.org
- ASTM G1-03(2017)e1. (2017), Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens, West Conshohocken, PA: ASTM International. www.astm.org
- Shin, M. W., Cho, K. H., Kim, S. J., and Jang, H. (2010), “Friction Instability Induced by Corrosion of Gray Iron Brake Discs,” Tribology Letters, 37(2), pp 149–157. doi:https://doi.org/10.1007/s11249-009-9503-x
- Blau, P. J., Truhan, J. J. and Kenik, E. A. (2007), “Effects of the Exposure to Corrosive Salts on the Frictional Behavior of Gray Cast Iron and a Titanium-Based Metal Matrix Composite,” Tribology International, 40(9), pp 1335–1343. doi:https://doi.org/10.1016/j.triboint.2007.02.020
- Igual Muñoz, A. and Espallargas, N. (2011), “Tribocorrosion Mechanisms,” Tribocorrosion of Passive Metals and Coatings, Landolt, D. and Mischler, S. (Eds.), 1st Ed., pp 121–136, Cambridge, UK: Woodhead Publishing.
- Quinn, T. F. J. and Winer, W. O. (1985), “The Thermal Aspects of Oxidational Wear,” Wear, 102(1–2), pp 67–80.
- Rasool, G. and Stack, M. M. (2014), “Mapping the Role of Cr Content in Dry Sliding of Steels: Comparison between Maps for Material and Counterface,” Tribology International, 80, pp 49–57. doi:https://doi.org/10.1016/j.triboint.2014.06.011
- Hutchings, I. Shipway, P., Lawrence, L. (Eds.) (2017), “Oxidative Wear,” Tribology, 2nd Ed., pp 127, Oxford, UK, Cambridge, MA: Butterworth-Heinemann.
- Yang, C. W., Kim, J. H., Triambulo, R. E., Kang, Y. H., Lee, J. S., and Park, J. W. (2013), “The Mechanical Property of the Oxide Scale on Fe-Cr Alloy Steels,” Journal of Alloys and Compounds, 549, pp 6–10. doi:https://doi.org/10.1016/j.jallcom.2012.09.064
- Smallman, R. E. and Ngan, A. H. W. (2014), “Oxidation Resistance—Alloying,” Modern Physical Metallurgy, pp 628, Oxford, UK, Cambridge, MA: Butterworth-Heinemann.
- Guo, Q., Liu, J., Yu, M., and Li, S. (2015), “Effect of Passive Film on Mechanical Properties of Martensitic Stainless Steel 15-5PH in a Neutral NaCl Solution,” Applied Surface Science, 327, pp 313–320. doi:https://doi.org/10.1016/j.apsusc.2014.11.154
- Stachowiak, G. W. and Batchelor, A. W. (2014), “Emulsions and Aqueous Lubricants,” Engineering Tribology, pp 67, Oxford, UK, Cambridge, MA: Butterworth-Heinemann.
- Wang, Y., Lei, T., and Liu, J. (1999), “Tribo-Metallographic Behavior of High Carbon Steels in Dry Sliding II. Microstructure and Wear,” Wear, 231(1), pp 12–19.
- Wang, Y., Lei, T., and Liu, J. (1999), “Tribo-Metallographic Behavior of High Carbon Steels in Dry Sliding III. Dynamic Microstructural Changes and Wear,” Wear, 231(1), pp 20–37.
- Prasad, B. K. (2011), “Sliding Wear Response of a Grey Cast Iron: Effects of Some Experimental Parameters,” Tribology International, 44(5), pp 660–667. doi:https://doi.org/10.1016/j.triboint.2011.01.006
- Kato, K. (2011), “Wear Modes at Asperity Contacts in Tribochemical Wear,” Tribocorrosion of Passive Metals and Coatings, pp 79, Cambridge, UK: Woodhead Publishing.
- Granta Design. (2019), “CES Edupack-AISI 4330.” Ansys.
- Granta Design. (2019), “CES Edupack-15-5PH H1075.” Ansys.
- Wang, S. Q., Wei, M. X., and Zhao, Y. T. (2010), “Effects of the Tribo-Oxide and Matrix on Dry Sliding Wear Characteristics and Mechanisms of a Cast Steel,” Wear, 269(5–6), pp 424–434. doi:https://doi.org/10.1016/j.wear.2010.04.028
- Hase, A. (2019), “Visualization of the Tribological Behavior of Graphite in Cast Iron by In Situ Observations of Sliding Interfaces,” Tribology International, 138(March), pp 40–46. doi:https://doi.org/10.1016/j.triboint.2019.05.031
- Montgomery, R. S. (1969), “The Mild Wear Mechanism of Nodular Iron,” Wear, 13(4–5), pp 337–343. doi:https://doi.org/10.1016/0043-1648(69)90255-5
- Straffelini, G., Giuliari, C., Pellizzari, M., Veneri, E., and Bronzato, M. (2011), “Dry Rolling–Sliding Wear of Austempered Cast Iron,” Wear, 271(9–10), pp 1602–1608. doi:https://doi.org/10.1016/j.wear.2010.12.018
- Terheci, M., Manory, R. R., and Hensler, J. H. (1995), “The Friction and Wear of Automotive Grey Cast Iron under Dry Sliding Conditions Part 1—Relationships between Wear Loss and Testing Parameters,” Wear, 180(1–2), pp 73–78. doi:https://doi.org/10.1016/0043-1648(94)06537-3
- Hutchings, I. Shipway, P., Lawrence, L. (Eds.) (2017), “Friction of Lamellar Solids,” Tribology, 2nd Ed., pp 63–65, Oxford, UK, Cambridge, MA: Butterworth-Heinemann.
- Ghasemi, R. and Elmquist, L. (2014), “The Relationship between Flake Graphite Orientation, Smearing Effect, and Closing Tendency under Abrasive Wear Conditions,” Wear, 317(1–2), pp 153–162. doi:https://doi.org/10.1016/j.wear.2014.05.015
- Adachi, K., Cho, U., Sinha, S. K., and Kato, K. (2001), “Self-Lubrication by Formation of Graphite Films in the Sliding of Silicon Nitride against Cast Iron,” Tribology Transactions, 44(1), pp 41–46. doi:https://doi.org/10.1080/10402000108982424
- Sugishita, J. and Fujiyoshi, S. (1981), “The Effect of Cast Iron Graphites on Friction and Wear Performance I: Graphite Film Formation on Grey Cast Iron Surfaces,” Wear, 66(2), pp 209–221. doi:https://doi.org/10.1016/0043-1648(81)90115-0
- Sugishita, J. and Fujiyoshi, S. (1981), “The Effect of Cast Iron Graphites on Friction and Wear Performance II: Variables Influencing Graphite Film Formation,” Wear, 68(1), pp 7–20. doi:https://doi.org/10.1016/0043-1648(81)90015-6
- Sugishita, J. and Fujiyoshi, S. (1982), “The Effect of Cast Iron Graphite on Friction and Wear Performance III: The Lubricating Effect of Graphite under Rolling–Sliding Contacts,” Wear, 77(2), pp 181–193.