References
- Ryan, R. S., and Gross, L. A. (1995), "Developmental Problems and Their Solution for the Space Shuttle Main Engine Alternate Liquid Oxygen High-Pressure Turbopump: Anomaly or Failure Investigation the Key," Marshall Space Flight Center, 95.
- Wei, Y. (2010), "Study on Wear Behavior of the Material in High-Speed Bearing and Sealing Under Impact-Sliding Condition," Harbin Industrial University, Harbin, China.
- Bosson, R., Sabin, P., and Turin, G. (1999), "Improvements of the Hydrogen Turbopump for the Vulcain 2 Engine," Proceedings of the 35th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Los Angeles, California, June 20–24.
- Kermouche, G., Kaiser, A. L., Gilles, P., and Bergheau, J. M. (2007), "Combined Numerical and Experimental Approach of the Impact-Sliding Wear of a Stainless Steel in a Nuclear Reactor," Wear, 263, pp 1551–1555. doi:https://doi.org/10.1016/j.wear.2007.02.015
- Messaadi, M., and Kapsa, P. (2016), "Wear Behavior of High Chromium Sintered Steel Under Dynamic Impact-Sliding: Effect of Temperature," Tribology International, 100, pp 380–387. doi:https://doi.org/10.1016/j.triboint.2016.04.010
- Yang, S., and Peng, Z. (2001), "The Experiment Study on the Wear Rule of T10 steel Under Pulsatile Impact Loading," Journal of Zhengzhou Textile Institute, 12(2).
- Shi, Z., Jiang, X., Li, X., and Zhou, F. (1988), "Scanning Electron Microscope Observation of High Temperature Slide-Impact Wear of Die Steel," Journal of Anhui Institute Technology, 7(2), pp 159–165.
- Yang, S., and Peng, Z. (2000), "Experimental Study on the Wear Behavior of 45 Steel Under Pulsatile Impact Loading, Part A: Physical Testing," 36(12), pp 535–538.
- Bhushan, B. (2002), Introduction to Tribology, John Wiley & Sons, New York, NY.
- Rabinowicz, E., and Tanner, R. I. (1995), "Friction and Wear of Materials," Journal of Applied Mechanics, 33, p 479. doi:https://doi.org/10.1115/1.3625110
- Fleming, J. R., and Suh, N. P. (1977), "Mechanics of Crack Propagation in Delamination Wear," Wear, 44, pp 39–56. doi:https://doi.org/10.1016/0043-1648(77)90083-7
- Chen, Y. X., Gong, W. J., and Kang, R. (2020), "Review and Propositions for the Sliding/Impact Wear Behavior in a Contact Interface," Chinese Journal of Aeronautics, 33(2), pp 391–406. doi:https://doi.org/10.1016/j.cja.2018.06.004
- Chen, Y. X., Gong, W. J., and Kang, R. (2016), "Coupling Behavior Between Adhesive and Abrasive Wear Mechanism of Aero-Hydraulic Spool Valves," Chinese Journal of Aeronautics, 29, pp 1119–1131.
- Yin, X., and Komvopoulos, K. (2010), "An Adhesive Wear Model of Fractal Surfaces in Normal Contact," International Journal of Solids and Structures, 47, pp 912–921. doi:https://doi.org/10.1016/j.ijsolstr.2009.12.003
- Greenwood, J., and Williamson, J. B. P. P. (1966), "Contact of Nominally Flat Surfaces," Proceedings of the Royal Society of London Series A, 295, pp 300–319.
- Mandelbrot, B. B. (1983), "The Fractal Geometry of Nature," American Journal of Physics, 51, p 286. doi:https://doi.org/10.1119/1.13295
- Liou, J. L., Tsai, C. M., and Lin, J.-F. (2010), "A Microcontact Model Developed for Sphere- and Cylinder-Based Fractal Bodies in Contact With a Rigid Flat Surface," Wear, 268, pp 431–442. doi:https://doi.org/10.1016/j.wear.2009.08.033
- Yan, W., and Komvopoulos, K. (1998), "Contact Analysis of Elastic-Plastic Fractal Surfaces," Journal of Applied Physics, 84, pp 3617–3624. doi:https://doi.org/10.1063/1.368536
- Yuan, Y., Zhang, J., and Cheng, Y. (2017), "An Elastoplastic Fractal Model for Cylinder in Contact With a Smooth Plane," Sci Sin Tech, 47, pp 502–513. doi:https://doi.org/10.1360/N092016-00244
- Chen, Q., Xu, F., Liu, P., and Fan, H. (2016), "Research on Fractal model of Normal Contact Stiffness Between Two Spheroidal Joint Surfaces Considering Friction Factor," Tribology International, 97, pp 253–264. doi:https://doi.org/10.1016/j.triboint.2016.01.023
- Attia, H., Gessesse, Y. B., and Osman, M. O. M. (2007), "New Parameter for Characterizing and Correlating Impact-Sliding Fretting Wear to Energy Dissipation-Experimental Investigation, Wear, 263, pp 419–429.
- Gessesse, Y. B., Attia, H., and Osman, M. O. M. (2004), "On the Mechanics of Crack Initiation and Propagation in Elasto-Plastic Materials in Impact Fretting Wear," Journal of Tribology, 126(2), pp 395–403. doi:https://doi.org/10.1115/1.1491975
- Johnson, K. L. (1986), "Contact Mechanics," Journal of Tribology, 108, p 464. doi:https://doi.org/10.1115/1.3261297
- Fan, H., Keer, L. M.,. Cheng, W., and Cheng, H. S. (1992), "Competition between Fatigue Crack Propagation and Wear," Journal of Tribology, 115, pp 141–147. doi:https://doi.org/10.1115/1.2920967
- Miller, G. R., Keer, L. M., and Cheng, H. S. (1985), "On the Mechanics of Fatigue Crack Growth Due to Contact Loading," Proceedings of the Royal Society A, 397, pp 197–209.
- Gong, W., Chen, Y., Li, M., and Kang, R. (2019), "Coupling Fractal Model for Adhesive and Three-Body Abrasive Wear of AISI 1045 Carbon Steel Spool Valves," Wear, 418, pp 75–85. doi:https://doi.org/10.1016/j.wear.2018.10.019
- Archard, J. F. (1953), "Contact and Rubbing of Flat Surfaces," Journal of Applied Physics, 24, pp 981–988. doi:https://doi.org/10.1063/1.1721448
- Attia, H. (2009), "A Generalized Fretting Wear Theory," Tribology International, 42, pp 1380–1388. doi:https://doi.org/10.1016/j.triboint.2009.04.010
- Endo, K., and Goto, H. (1981), "Initiation and Propagation of Fretting Fatigue Cracks," Wear, 38, pp 311–324. doi:https://doi.org/10.1016/0043-1648(76)90079-X
- Chen, Q., Zhao, Y. C., Yunbo, M. A., and Yin, J. B. (2014), "Testing Experiment of Characteristic-Scale Coefficient About Cylinder Surface," Journal of Mechanical Strength, 5, pp 687–690.
- Gong, W., Chen, Y., Li, M., and Kang, R. (2019), "Adhesion-Fatigue Dual Mode Wear Model for Fractal Surfaces in AISI 1045 Cylinder-Plane Contact Pairs," Wear, 430, pp 327–339. doi:https://doi.org/10.1016/j.wear.2019.05.008
- Ge, S. R. (2005), The Fractal of Tribology, Machinery Industry Press, pp 252–253.
- Waterhouse, R. (1976), "Fretting Fatigue," Metallurgical Reviews, 37(1), pp 127–141.