References
- Jiang, B. Q, Huang, X, Guo, F, Jia, X. H, and Wang, Y. M (2020), “Effect of Friction Coefficient on the Mixed Lubrication Model of Rotary Lip Seals,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 234(11), pp 1746–1754. doi:10.1177/1350650119877056
- Muller, H. K. (2019), Fluid Sealing Technology: Principles and Applications, Marcel Dekker: New York.
- Stakenborg, M. (1988), “On the Sealing Mechanism of Radial Lip Seals,” Tribology International, 21(6), pp 335–340. doi:10.1016/0301-679X(88)90110-7
- Gabelli, A. and Poll, G. (1992), “Formation of Lubricant Film in Rotary Sealing Contacts: Part I—Lubricant Film Modeling,” Journal of Tribology, 114(2), pp 280–287. doi:10.1115/1.2920885
- Qian, D. S. (1984), “The Sealing Mechanism and Design Factors of Radial Lip Seals for Crankshafts,” Chinese Internal Combustion Engine Engineering, 5, pp 10–13.
- Kammüller, M. (1986), For Sealing Radial Shaft Bearings. University of Stuttgart.
- Muller, H. K. (1987), “Concepts of Sealing Mechanism of Rubber Lip Type Rotary Shaft Seals,” Proceedings of the 11th BHRA International Conference on Fluid Sealing, Cranfiled, pp 698–709.
- Horve, L. (1984), “The Effect of Operating Parameters upon Radial Lip Seal Performance,” SAE Transactions, 93(5), pp 181–187.
- Salant, R. F. and Flaherty, A. L. (1995), “Elastohydrodynamic Analysis of Reverse Pumping in Rotary Lip Seals with Microasperities,” Journal of Tribology, 117(1), pp 53–59. doi:10.1115/1.2830606
- Shi, F. and Salant, R. F. (2001), “Numerical Study of a Rotary Lip Seal with a Quasi-Random Sealing Surface,” Journal of Tribology, 123(3), pp 517–524. doi:10.1115/1.1308028
- Salant, R. F. and Rocke, A. H. (2004), “Hydrodynamic Analysis of the Flow in a Rotary Lip Seal Using Flow Factors,” Journal of Tribology, 126(1), pp 156–161. doi:10.1115/1.1609486
- Rocke, A. H. and Salant, R. F. (2005), “Elastohydrodynamic Analysis of a Rotary Lip Seal Using Flow Factors,” Tribology Transactions, 48(3), pp 308–316. doi:10.1080/05698190590965639
- Patir, N. and Cheng, H. S. (1978), “An Average Flow Model for Determining Effects of Three-Dimensional Roughness on Partial Hydrodynamic Lubrication,” Journal of Lubrication Technology, 100(1), pp 12–17.
- Patir, N. and Cheng, H. S. (1979), “Application of Average Flow Model to Lubrication between Rough Sliding Surfaces,” Journal of Lubrication Technology, 101(2), pp 220–229.
- Guo, F., et al. (2013), “A Mixed Lubrication Model of a Rotary Lip Seal Using Flow Factors,” Tribology International, 57, pp 195–201. doi:10.1016/j.triboint.2012.08.008
- Guo, F., et al. (2014), “A Mixed Lubrication Theoretical Model and Experimental Verification of Rotary Lip Seals,” Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 50(3), pp 137–144. doi:10.3901/JME.2014.03.137
- Borras, F. X., de Rooij, M. B., and Schipper, D. J. (2020), “Misalignment-Induced Micro-Elastohydrodynamic Lubrication in Rotary Lip Seals,” Lubricants, 8(2), pp 1–19.
- Huang, X., Liu, S., and Zhang, C. (2020), “A Mixed Thermal Elastohydrodynamic Lubrication Model of Rotary Lip Seal,” Science Progress, 103(1), 1–17.
- Liu, D., et al. (2019), “Numerical Study of the Effects of Textured Shaft on the Wear of Rotary Lip Seals,” Tribology International, 138, pp 215–238. doi:10.1016/j.triboint.2019.05.037
- Sukumar, T., Bapu, B. R., Prasad, B. D., and Prithiv, B. V. (2019), “Numerical Analysis and Design Optimization of Lip Seal Opening Pressure for Automotive Valves,” Advances in Manufacturing Technology, pp 119–129, Springer, Singapore.
- Jia, X., et al. (2014), “Effects of the Radial Force on the Static Contact Properties and Sealing Performance of a Radial Lip Seal,” Science China Technological Sciences, 57(6), pp 1175–1182. doi:10.1007/s11431-014-5548-7
- Guo, F., et al. (2014), “The Effect of Aging in Oil on the Performance of a Radial Lip Seal,” Tribology International, 78, pp 187–194.