References
- Hammitt, F. G. (1980), Cavitation and Multiphase Flow Phenomena, McGraw-Hill International Book Co.: New York.
- Franc, J. P. and Michel, J. M. (2004), Fundamentals of Cavitation, Kluwer Academic Publishers: Dordrecht.
- Amann, T., Waidele, M., and Kailer, A. (2018), “Analysis of Mechanical and Chemical Mechanisms on Cavitation Erosion–Corrosion of Steels in Salt Water Using Electrochemical Methods,” Tribology International, 124, pp 238–246. doi:https://doi.org/10.1016/j.triboint.2018.04.012
- Tao, R., Xiao, R., Wang, F., and Liu, W. (2019), “Improving the Cavitation Inception Performance of a Reversible Pump–Turbine in Pump Mode by Blade Profile Redesign: Design Concept, Method and Applications,” Renewable Energy, 133, pp 325–342. doi:https://doi.org/10.1016/j.renene.2018.09.108
- Luo, X.-w., Ji, B., and Tsujimoto, Y. (2016), “A Review of Cavitation in Hydraulic Machinery,” Journal of Hydrodynamics, 28, pp 335–358. doi:https://doi.org/10.1016/S1001-6058(16)60638-8
- Hong, S., Lin, J., Wu, Y., Wu, J., Zheng, Y., Zhang, Y., Cheng, J., and Sun, W. (2020), “Cavitation Erosion Characteristics at Various Flow Velocities in NaCl Medium of Carbide-Based Cermet Coatings Prepared by HVOF Spraying,” Ceramics International, 47, pp 1929–1939. doi:https://doi.org/10.1016/j.ceramint.2020.09.022
- Bhagat, R. (1987), “Cavitation Erosion of Composites—A Materials Perspective,” Journal of Materials Science Letters, 6, pp 1473–1475. doi:https://doi.org/10.1007/BF01689327
- Taillon, G., Pougoum, F., Lavigne, S., Ton-That, L., Schulz, R., Bousser, E., Savoie, S., Martinu, L., and Klemberg-Sapieha, J.-E. (2016), “Cavitation Erosion Mechanisms in Stainless Steels and in Composite Metal–Ceramic HVOF Coatings,” Wear, 364, pp 201–210. doi:https://doi.org/10.1016/j.wear.2016.07.015
- Caccese, V., Light, K., and Berube, K. (2006), “Cavitation Erosion Resistance of Various Material Systems,” Ships and Offshore Structures, 1, pp 309–322. doi:https://doi.org/10.1533/saos.2006.0136
- Shipway, P. H. and Gupta, K. (2011), “The Potential of WC-Co Hardmetals and HVOF Sprayed Coatings to Combat Water-Droplet Erosion,” Wear, 271, pp 1418–1425. doi:https://doi.org/10.1016/j.wear.2010.12.058
- Thakur, L. and Arora, N. (2013), “Solid Particle Erosion Behavior of WC-CoCr Nanostructured Coating,” Tribology Transactions, 56, pp 781–788. doi:https://doi.org/10.1080/10402004.2013.797532
- Sun, Y., Su, W., Yang, H., and Ruan, J. (2015), “Effects of WC Particle Size on Sintering Behavior and Mechanical Properties of Coarse Grained WC-8Co Cemented Carbides Fabricated by Unmilled Composite Powders,” Ceramics International, 41, pp 14482–14491. doi:https://doi.org/10.1016/j.ceramint.2015.07.086
- Hong, S., Wu, Y., Zhang, J., Zheng, Y., Zheng,Y., and Lin, J. (2016), “Synergistic Effect of Ultrasonic Cavitation Erosion and Corrosion of WC–CoCr and FeCrSiBMn Coatings Prepared by HVOF Spraying,” Ultrasonics Sonochemistry, 31, pp 563–569. doi:https://doi.org/10.1016/j.ultsonch.2016.02.011
- Stokes, J. and Looney, L. (2001), “HVOF System Definition to Maximise the Thickness of Formed Components,” Surface and Coatings Technology, 148, pp 18–24. doi:https://doi.org/10.1016/S0257-8972(01)01272-5
- Wood, R. J. (2010), “Tribology of Thermal Sprayed WC-Co Coatings,” International Journal of Refractory Metals and Hard Materials, 28, pp 82–94. doi:https://doi.org/10.1016/j.ijrmhm.2009.07.011
- Babu, A., Arora, H. S., Singh, H., and Grewal, H. S. (2019), “Microwave Synthesized Composite Claddings with Enhanced Cavitation Erosion Resistance,” Wear, 422–423, pp 242–251. doi:https://doi.org/10.1016/j.wear.2019.01.072
- Babu, A., Arora, H., and Grewal, H. (2019), “Microwave-Assisted Post-Processing of Detonation Gun–Sprayed Coatings for Better Slurry and Cavitation Erosion Resistance,” Journal of Thermal Spray Technology, 28, pp 1565–1578. doi:https://doi.org/10.1007/s11666-019-00914-9
- Grewal, H. S., Agrawal, A., and Singh, H. (2013), “Slurry Erosion Performance of Ni-Al2O3 Based Composite Coatings,” Tribology International, 66, pp 296–306. doi:https://doi.org/10.1016/j.triboint.2013.06.010
- Gupta, D. and Sharma, A. K. (2012), “Microstructural Characterization of Cermet Cladding Developed through Microwave Irradiation,” Journal of Materials Engineering and Performance, 21, pp 2165–2172. doi:https://doi.org/10.1007/s11665-012-0142-2
- Bansal, A., Zafar, S., and Sharma, A. K. (2015), “Microstructure and Abrasive Wear Performance of Ni-WC Composite Microwave Clad,” Journal of Materials Engineering and Performance, 24, pp 3708–3716. doi:https://doi.org/10.1007/s11665-015-1657-0
- Zafar, S. and Sharma, A. K. (2016), “Microstructure and Wear Performance of Heat Treated WC-12Co Microwave Clad,” Vacuum, 131, pp 213–222. doi:https://doi.org/10.1016/j.vacuum.2016.06.021
- Zafar, S. and Sharma, A. K. (2015), “On Friction and Wear Behavior of WC-12Co Microwave Clad,” Tribology Transactions, 58, pp 584–591. doi:https://doi.org/10.1080/10402004.2014.996310
- Zafar, S. and Sharma, A. K. (2015), “Dry Sliding Wear Performance of Nanostructured WC-12Co Deposited through Microwave Cladding,” Tribology International, 91, pp 14–22. doi:https://doi.org/10.1016/j.triboint.2015.06.023
- Babu, A., Arora, H., Singh, H., and Grewal, H. (2019), “Microwave Synthesized Composite Claddings with Enhanced Cavitation Erosion Resistance,” Wear, 422, pp 242–251. doi:https://doi.org/10.1016/j.wear.2019.01.072
- Babu, A., Arora, H., Singh, R., and Grewal, H. (2021), “Slurry Erosion Resistance of Microwave Derived Ni-SiC Composite Claddings,” Silicon, pp 1–13. doi:https://doi.org/10.1007/s12633-020-00849-9
- Archard, J. (1953), “Contact and Rubbing of Flat Surfaces,” Journal of Applied Physics, 24, pp 981–988. doi:https://doi.org/10.1063/1.1721448
- Cheng, J., Liang, X., and Xu, B. (2013), “Devitrification of Arc-Sprayed FeBSiNb Amorphous Coatings: Effects on Wear Resistance and Mechanical Behavior,” Surface and Coatings Technology, 235, pp 720–726. doi:https://doi.org/10.1016/j.surfcoat.2013.08.054
- Halling, J. (1983), “The Tribology of Surface Films,” Thin Solid films, 108, pp 103–115. doi:https://doi.org/10.1016/0040-6090(83)90496-0
- Musil, J., Kunc, F., Zeman, H., and Poláková, H. (2002), “Relationships between Hardness, Young's Modulus and Elastic Recovery in Hard Nanocomposite Coatings,” Surface and Coatings Technology, 154, pp 304–313. doi:https://doi.org/10.1016/S0257-8972(01)01714-5
- Mishra, R. R. and Sharma, A. K. (2016), “Microwave–Material Interaction Phenomena: Heating Mechanisms, Challenges and Opportunities in Material Processing,” Composites Part A: Applied Science and Manufacturing, 81, pp 78–97. doi:https://doi.org/10.1016/j.compositesa.2015.10.035
- Singh, S., Gupta, D., Jain, V., and Sharma, A. K. (2015), “Microwave Processing of Materials and Applications in Manufacturing Industries: A Review,” Materials and Manufacturing Processes, 30, pp 1–29. doi:https://doi.org/10.1080/10426914.2014.952028
- Oghbaei, M. and Mirzaee, O. (2010), “Microwave versus Conventional Sintering: A Review of Fundamentals, Advantages and Applications,” Journal of Alloys and Compounds, 494, pp 175–189. doi:https://doi.org/10.1016/j.jallcom.2010.01.068
- Oliver, W. C. and Pharr, G. M. (2004), “Measurement of Hardness and Elastic Modulus by Instrumented Indentation: Advances in Understanding and Refinements to Methodology,” Journal of Materials Research, 19, pp 3–20. doi:https://doi.org/10.1557/jmr.2004.19.1.3
- Ponton, C. B. and Rawlings, R. D. (1989), “Vickers Indentation Fracture Toughness Test Part 1 Review of Literature and Formulation of Standardised Indentation Toughness Equations,” Materials Science and Technology, 5, pp 865–872. doi:https://doi.org/10.1179/mst.1989.5.9.865
- Sweet, J., Roth, E., and Moss, M. (1987), “Thermal Conductivity of Inconel 718 and 304 Stainless Steel,” International Journal of Thermophysics, 8, pp 593–606. doi:https://doi.org/10.1007/BF00503645
- Nair, R. B., Arora, H. S., and Grewal, H. S. (2019), “Microwave Synthesized Complex Concentrated Alloy Coatings: Plausible Solution to Cavitation Induced Erosion–Corrosion,” Ultrasonics Sonochemistry, 50, pp 114–125. doi:https://doi.org/10.1016/j.ultsonch.2018.09.004
- Zhang, H., He, Y., and Pan, Y. (2013), “Enhanced Hardness and Fracture Toughness of the Laser-Solidified FeCoNiCrCuTiMoAlSiB0.5 High-Entropy Alloy by Martensite Strengthening,” Scripta Materialia, 69, pp 342–345. doi:https://doi.org/10.1016/j.scriptamat.2013.05.020
- Wang, Q., Tang, Z., and Cha, L. (2015), “Cavitation and Sand Slurry Erosion Resistances of WC-10Co-4Cr Coatings,” Journal of Materials Engineering and Performance, 24, pp 2435–2443. doi:https://doi.org/10.1007/s11665-015-1496-z
- Ding, Z.-X., Wei, C., and Qun, W. (2011), “Resistance of Cavitation Erosion of Multimodal WC-12Co Coatings Sprayed by HVOF,” Transactions of Nonferrous Metals Society of China, 21, pp 2231–2236. doi:https://doi.org/10.1016/S1003-6326(11)61000-5
- Sugiyama, K., Nakahama, S., Hattori, S., and Nakano, K. (2005), “Slurry Wear and Cavitation Erosion of Thermal-Sprayed Cermets,” Wear, 258, pp 768–775. doi:https://doi.org/10.1016/j.wear.2004.09.006
- Tam, K., Cheng, F., and Man, H. (2002), “Cavitation Erosion Behavior of Laser-Clad Ni-Cr-Fe-WC on Brass,” Materials Research Bulletin, 37, pp 1341–1351. doi:https://doi.org/10.1016/S0025-5408(02)00766-3
- Zheng, Z., Zheng, Y., Sun, W., and Wang, J. (2015), “Effect of Heat Treatment on the Structure, Cavitation Erosion and Erosion–Corrosion Behavior of Fe-Based Amorphous Coatings,” Tribology International, 90, pp 393–403. doi:https://doi.org/10.1016/j.triboint.2015.04.039
- Selvam, K., Saini, J., Perumal, G., Ayyagari, A., Salloom, R., Mondal, R., Mukherjee, S., Grewal, H. S., and Arora, H. S. (2019), “Exceptional Cavitation Erosion–Corrosion Behavior of Dual-Phase Bimodal Structure in Austenitic Stainless Steel,” Tribology International, 134, pp 77–86.