The Grease Worker and Its Applicability to Study Mechanical Aging of Lubricating Greases for Rolling Bearings

References

• Lugt, P. (2013), Grease Lubrication in Rolling Bearings, 1st Ed., John Wiley & Sons: Chichester, UK.
   Google Scholar
• Ito, H., Tomaru, M., and Suzuki, T. (1988), “Physical and Chemical Aspects of Grease Deterioration in Sealed Ball Bearings,” Lubrication Engineering, 44(10), pp 872–879.
   Google Scholar
• Kuhn, E. (1998), “Investigations into the Degradation of the Structure of Lubricating Greases,” Tribology Transactions, 41(2), pp 247–250. doi:10.1080/10402009808983745
   Web of Science ®Google Scholar
• Rezasoltani, A. and Khonsari, M. M. (2014), “On the Correlation Between Mechanical Degradation of Lubricating Grease and Entropy,” Tribology Letters, 56(2), pp 197–204. doi:10.1007/s11249-014-0399-8
   Web of Science ®Google Scholar
• Zhou, Y., Bosman, R., and Lugt, P. M. (2018), “A Model for Shear Degradation of Lithium Soap Grease at Ambient Temperature,” Tribology Transactions, 61(1), pp 61–70. doi:10.1080/10402004.2016.1272730
   Web of Science ®Google Scholar
• Osara, J. and Bryant, M. (2019), “Thermodynamics of Grease Degradation,” Tribology International, 137, pp 433–445. doi:10.1016/j.triboint.2019.05.020
   Web of Science ®Google Scholar
• Acar, N., Franco, J. M., and Kuhn, E. (2020), “On the Shear-Induced Structural Degradation of Lubricating Greases and Associated Activation Energy: An Experimental Rheological Study,” Tribology International, 144, pp 106105. doi:10.1016/j.triboint.2019.106105
   Web of Science ®Google Scholar
• Magnin, A. and Piau, J. M. (1987), “Shear Rheometry of Fluids with a Yield Stress,” Journal of Non-Newtonian Fluid Mechanics, 23, pp 91–106. doi:10.1016/0377-0257(87)80012-5
   Web of Science ®Google Scholar
• Baart, P., Lugt, P. M., and Prakash, B. (2014), “On the Normal Stress Effect in Grease-Lubricated Bearing Seals,” Tribology Transactions, 57(5), pp 939–943. doi:10.1080/10402004.2014.935120
   Web of Science ®Google Scholar
• Barnes, H., Hutton, J., and Walters, K. (1989), An Introduction to Rheology, Elsevier Science, AE Amsterdam.
   Google Scholar
• Hutton, J. F. (1975), “On Using the Weissenberg Rheogoniometer to Measure Normal Stresses in Lubricating Greases as Examples of Materials Which Have a Yield Stress,” Rheologica Acta, 14(11), pp 979–992. doi:10.1007/BF01516301
   Web of Science ®Google Scholar
• Zhou, Y., Bosman, R., and Lugt, P. M. (2019), “A Master Curve for the Shear Degradation of Lubricating Greases with a Fibrous Structure,” Tribology Transactions, 62(1), pp 78–87. doi:10.1080/10402004.2018.1496304
   Web of Science ®Google Scholar
• ASTM D1403-10. (2007), “Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment,” ASTM International: West Conshohocken, PA.
   Google Scholar
• American Society for Testing and Materials. (2008), “ASTM D217 Standard Test Methods for Cone Penetration of Lubricating Grease,” ASTM International: West Conshohocken, PA.
   Google Scholar
• Spiegel, K., Fricke, J., and Meis, K.-R. (2000), “The flow behavior of lubricating greases,” Vol. 500 of Kontakt & Studium, Schmierfette, W. Bartz (Ed.), pp 228–265, Expert Verlag, Renningen-Malmsheim.
   Google Scholar
• Dyson, A. and Wilson, A. R. (1965), “Paper 3: Film Thicknesses in Elastohydrodynamic Lubrication by Silicone Fluids,” Proceedings of the Institution of Mechanical Engineers, Conference Proceedings, 180(11), pp 97–112. doi:10.1243/PIME_CONF_1965_180_323_02
   Google Scholar
• Lugt, P. (2009), “A Review on Grease Lubrication in Rolling Bearings,” Tribology Transactions, 52(4), pp 470–480. doi:10.1080/10402000802687940
   Web of Science ®Google Scholar
• Agassant, J.-F., Avenas, P., Carreau, P. J., Vergnes, B., and Vincent, M. (2017), Polymer Processing: Principles and Modeling, 2nd Ed., Carl Hanser: München, Germany.
   Google Scholar
• Carreau, P. J. (1972), “Rheological Equations from Molecular Network Theories,” Transactions of the Society of Rheology, 16(1), pp 99–127.
   Web of Science ®Google Scholar
• Barnes, H. (2000), A Handbook of Elementary Rheology, University of Wales Institute of Non-Newtonian Fluid Mechanics, Penglais, United Kingdom.
   Google Scholar
• (2019), Comsol Multiphysics® Version 5.5. Comsol AB, Stockholm, Sweden.
   Google Scholar
• Westerberg, L. G., Sarkar, C., Farre Llados, J., Lundstrom, T. S., and Hoglund, E. (2017), “Lubricating Grease Flow in a Double Restriction Seal Geometry: A Computational Fluid Dynamics Approach,” Tribology Letters, 65(3).
   Web of Science ®Google Scholar
• (2017), Comsol Multiphysics Cyclopedia. Available at: https://www.comsol.ch/multiphysics/navier-stokesequations. (accessed March, 2021).
   Google Scholar
• DIN 51810-1. (2011), Testing of lubricants - Determination of the shear viscosity of lubricating greases using the rotational viscometer - Part 1: Cone and plate measuring system. Berlin.
   Google Scholar
• DIN 51810-2. (2011), Testing of lubricants - Testing rheological properties of lubricating greases - Part 2: Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system. Berlin.
   Google Scholar
• Cyriac, F., Lugt, P. M., and Bosman, R. (2015), “On a New Method to Determine the Yield Stress in Lubricating Grease,” Tribology Transactions, 58(6), pp 1021–1030. doi:10.1080/10402004.2015.1035414
   Web of Science ®Google Scholar
• Haist, M., Link, J., Nicia, D., et al. (2020), “Interlaboratory Study on Rheological Properties of Cement Pastes and Reference Substances: Comparability of Measurements Performed with Different Rheometers and Measurement Geometries,” Materials and Structures, 53(4).
   PubMed Web of Science ®Google Scholar
• Mewis, J. and Wagner, N. J. (2009), “Thixotropy,” Advances in Colloid and Interface Science, 147–148, pp 214–227. doi:10.1016/j.cis.2008.09.005
   PubMed Web of Science ®Google Scholar