Study on the Friction Performance of Textured Surface on Water Hydraulic Motor Piston Pair

References

• Zhao, J., Wang, W., and Xie, T. (2010), “Water Hydraulic Motor: State of the Art,” Machine Tool & Hydraulics, 38(15), pp 120–122.
   Google Scholar
• Gachot, C., Rosenkranz, A., Hsu, S. M., and Costa, H. L. (2017), “A Critical Assessment of Surface Texturing for Friction and Wear Improvement,” Wear, 372–373, pp 21–41. doi:10.1016/j.wear.2016.11.020
   Web of Science ®Google Scholar
• Han, Z. W., Ren, L. Q., and Liu, Z. B. (2004), “Investigation on Anti-Wear Ability of Bionic Nonsmooth Surfaces Made by Laser Texturing,” Tribology, 24(4), pp 289–293.
   Google Scholar
• Ding, X., Chen, D., Zhang, W., and Yu, S. (2020), “Experiment of Frictional Vibration Performance of the Micro-Texture of DLC Thin Film with Dry Gas Seal Rings,” Tribology International, 147, pp 106267. doi:10.1016/j.triboint.2020.106267
   Web of Science ®Google Scholar
• Zhong, Y., Zheng, L., Gao, Y., and Liu, Z. (2019), “Numerical Simulation and Experimental Investigation of Tribological Performance on Bionic Hexagonal Textured Surface,” Tribology International, 129, pp 151–161. doi:10.1016/j.triboint.2018.08.010
   Web of Science ®Google Scholar
• Liu, W., Hi, H., Wang, P., and Chen, H. (2020), “Investigation on the Tribological Performance of Micro-Dimples Textured Surface Combined with Longitudinal or Transverse Vibration under Hydrodynamic Lubrication,” International Journal of Mechanical Sciences, 174, pp 105474. doi:10.1016/j.ijmecsci.2020.105474
   Web of Science ®Google Scholar
• Liu, H. and Xu, Z. (2018), “Study on Drag and Noise Reduction of Pantograph Rods Based on Bionic Non-Smooth Structures,” Noise and Vibration Control, 38, pp 269–272.
   Google Scholar
• Ma, C. (2018), Study on the Lubrication Computational Model and Antifriction Performance of Textured Surfaces, PhD Dissertation, China University of Mining and Technology.
   Google Scholar
• Galda, L., Sep, J., Olszewski, A., and Zochowski, T. (2019), “Experimental Investigation into Surface Texture Effect on Journal Bearings Performance,” Tribology International, 136, pp 372–384. doi:10.1016/j.triboint.2019.03.073
   Web of Science ®Google Scholar
• Vladescu, S. C., Olver, A. V., Pegg, I. G., and Reddyhoff, T. (2015), “The Effects of Surface Texture in Reciprocating Contacts—An Experimental Study,” Tribology International, 82, pp 28–42. doi:10.1016/j.triboint.2014.09.015
   Web of Science ®Google Scholar
• Niketh, S. and Samuel, G. L. (2018), “Drilling Performance of Microtextured Tools under Dry, Wet and MQL Condition,” Journal of Manufacturing Processes, 32, pp 254–268. doi:10.1016/j.jmapro.2018.02.012
   Web of Science ®Google Scholar
• Ahmed, Y. S., Paiva, J. M., Arif, A. F., Amorim, F. L., and Veldhuis, S. C. (2020), “The Effect of Laser Micro-Scale Textured Tools on the Tool–Chip Interface Performance and Surface Integrity during Austenitic Stainless-Steel Turning,” Applied Surface Science, 510, pp 145455. doi:10.1016/j.apsusc.2020.145455
   Web of Science ®Google Scholar
• Zhao, W., Wang, L., and Xue, Q. (2011), “Development and Research Progress of Surface Texturing on Improving Tribological Performance of Surface,” Tribology, 31(6), pp 622–631.
   Google Scholar
• Ma, H., Gao, D., and Wu, S. (2018), “Experimental Study on Friction–Wear for Valve Plate with Bionic Non-Smooth Surface of Hydraulic Motor,” Journal of Mechanical Engineering, 54(13), pp 142–152. doi:10.3901/JME.2018.13.142
   Google Scholar
• Vrbka, M., Křupka, I., Svoboda, P., Šperka, P., Návrat, T., Hartl, M., and Nohava, J. (2011), “Effect of Shot Peening on Rolling Contact Fatigue and Lubricant Film Thickness within Mixed Lubricated Non-Conformal Rolling/Sliding Contacts,” Tribology International, 44(12), pp 1726–1735. doi:10.1016/j.triboint.2011.06.019
   Web of Science ®Google Scholar
• Bai, L. and Bai, S. (2014), “Frictional Performance of a Textured Surface with Elliptical Dimples: Geometric and Distribution Effects,” Tribology Transactions, 57(6), pp 1122–1128. doi:10.1080/10402004.2014.939317
   Web of Science ®Google Scholar
• Liu, J. (2019), Lubrication Characteristic Simulation and Wear Test of Valve Port Pair of Seawater Motor with Bionic Non-Smooth Surface, MA Thesis, Yanshan University.
   Google Scholar
• Li, D., Liu, Y., Deng, Y., Fang, M., and Wu, D. (2018), “The Effect of Different Temperature on Friction and Wear Properties of CFRPEEK against AISI 431 Steel under Water Lubrication,” Tribology Transactions, 61(2), pp 357–366. doi:10.1080/10402004.2017.1326649
   Web of Science ®Google Scholar
• Wang, Z., Ni, J., and Gao, D. (2016), “Friction and Wear Properties of Stainless Sliding against GFER and CFRPEEK under Seawater Lubrication,” China Surface Engineering, 29(2), pp 49–57.
   Google Scholar
• Song, J., Xiang, D., Wang, S., Liao, Z., Lu, J., Liu, Y., Liu, W., and Peng, Z. (2018), “In Vitro Wear Study of PEEK and CFRPEEK against UHMWPE for Artificial Cervical Disc Application,” Tribology International, 122, pp 218–227. doi:10.1016/j.triboint.2018.02.034
   Web of Science ®Google Scholar
• Wu, S. (2017), Simulation Research on Lubrication-Bearing Mechanism and Experiment Study on Friction–Wear for Port Pair with Bionic Non-Smooth Surface, PhD Dissertation, Yanshan University.
   Google Scholar
• Liang, X., Yan, X., Yang, W., Wood, R., and Liu, Z. (2019), “Thermo-Elasto-Hydrodynamic Analysis and Optimization of Rubber-Supported Water-Lubricated Thrust Bearings with Polymer Coated Pads,” Tribology International, 138, pp 365–379. doi:10.1016/j.triboint.2019.06.012
   Web of Science ®Google Scholar
• Yang, X., Peng, X., Meng, K., Jiang, J., and Wang, Y. (2019), “Thermo-Elasto-Hydrodynamic Analysis of Triangular Textured Mechanical Face Seals,” Journal of Zhejiang University-Science A: Applied Physics & Engineering, 20(11), pp 864–881.
   Web of Science ®Google Scholar
• Xiang, G., Han, Y., Wang, J., Wang, J., and Ni, X. (2019), “Coupling Transient Mixed Lubrication and Wear for Journal Bearing Modeling,” Tribology International, 138, pp 1–15. doi:10.1016/j.triboint.2019.05.011
   Web of Science ®Google Scholar
• Zhang, L., Diao, K., Meng, D., and Yu, Z. (2014), “Finite Element Modelling of Transient Dynamics of Frictional Squeal in Pin-on-Disc System,” Journal of Tongji University, 42(10), pp 1586–1595.
   Google Scholar
• Nan, Z., Zhao, R., and Zheng, Y. (2016), “Research of Dynamic Performance of Large Scale Wind Power Generator Yaw Bearing,” Journal of Mechanical Transmission, 40(1), pp 64–67.
   Google Scholar
• Wang, Z. (2014), Research on the Key Technology of Incurve Type Water Hydraulic Motor with Low-Speed High Torque, PhD Dissertation, Yanshan University.
   Google Scholar
• Vlădescu, S. C., Medina, S., Olver, A. V., Pegg, I. G., and Reddyhoff, T. (2016), “Lubricant Film Thickness and Friction Force Measurements in a Laser Surface Textured Reciprocating Line Contact Simulating the Piston Ring–Liner Pairing,” Tribology International, 98, pp 317–329. doi:10.1016/j.triboint.2016.02.026
   Web of Science ®Google Scholar
• Lu, X. and Khonsari, M. M. (2007), “An Experimental Investigation of Dimple Effect on the Stribeck Curve of Journal Bearings,” Tribology Letters, 27(2), pp 169–176. doi:10.1007/s11249-007-9217-x
   Web of Science ®Google Scholar
• Zheng, D., Cai, Z., Shen M., Zheng, Y., and Li, M. (2016), “Investigation of the Tribology Behaviour of the Graphene Nanosheets as Oil Additives on Textured Alloy Cast Iron Surface,” Applied Surface Science, 387, pp 66–75. doi:10.1016/j.apsusc.2016.06.080
   Web of Science ®Google Scholar
• Han, P., Kim, J., Ehmann, K., and Cao, J. (2013), “Laser Surface Texturing of Medical Needles for Friction Control,” International Journal of Mechatronics and Manufacturing Systems, 6(3), pp 215–228. doi:10.1504/IJMMS.2013.056449
   Google Scholar
• Wang, X., Giovannini, M., Xing, Y., Kang, M., and Ehmann, K. (2015), “Fabrication and Tribological Behaviors of Corner-Cube-Like Dimple Arrays Produced by Laser Surface Texturing on Medical Needles,” Tribology International, 92, pp 553–558. doi:10.1016/j.triboint.2015.07.042
   Web of Science ®Google Scholar
• Dadouche, A. and Conlon, M. J. (2016), “Operational Performance of Textured Journal Bearings Lubricated with a Contaminated Fluid,” Tribology International, 93, pp 377–389. doi:10.1016/j.triboint.2015.09.022
   Web of Science ®Google Scholar
• Luo, M., He, Q., Wang, H., and Chang, L. (2021), “Tribological Behavior of Surface Textured Short Carbon Fiber–Reinforced Nylon Composites Fabricated by Three-Dimensional Printing Techniques,” Journal of Tribology, 143(5), pp 1–14.
   Web of Science ®Google Scholar
• Wu, S., Gao, D., Liang, Y., and Chen, B. (2015), “Influence of Non-Smooth Surface on Tribological Properties of Glass Fiber–Epoxy Resin Composite Sliding against Stainless Steel under Natural Seawater Lubrication,” Chinese Journal of Mechanical Engineering, 28(6), pp 1171–1176.
   Web of Science ®Google Scholar