References
- Turetta, A., Bruschi, S., and Ghiotti, A. (2006), “Investigation of 22MnB5 Formability in Hot Stamping Operations,” Journal of Materials Processing Technology, 177(1–3), pp 396–400. doi:https://doi.org/10.1016/j.jmatprotec.2006.04.041
- Åkerström, P., Wikman, B., and Oldenburg, M. (2005), “Material Parameter Estimation for Boron Steel from Simultaneous Cooling and Compression Experiments,” Modelling and Simulation in Materials Science and Engineering, 13(8), pp 1291–1308. doi:https://doi.org/10.1088/0965-0393/13/8/007
- Taylor, M. D., Choi, K. S., Sun, X., Matlock, D. K., Packard, C. E., Xu, L., and Barlat, F. (2014), “Correlations between Nanoindentation Hardness and Macroscopic Mechanical Properties in DP980 Steels,” Materials Science & Engineering A, 597(12), pp 431–439.
- Qiang, X., Bijlaard, F. S., and Kolstein, H. (2012), “Post-Fire Mechanical Properties of High Strength Structural Steels S460 and S690,” Engineering Structures, 35(2), pp 1–10. doi:https://doi.org/10.1016/j.engstruct.2011.11.005
- Maggi, S. and Murgia, M. (2008), “Introduction to the Metallurgic Characteristics of Advanced High-Strength Steels for Automobile Applications,” Welding International, 22(9), pp 610–618. doi:https://doi.org/10.1080/09507110802413001
- Zhu, B., Zhang, Y. S., Li, J., Wang, H., and Ye, Z. C. (2011), “Simulation Research of Hot Stamping and Phase Transition of Automotive High Strength Steel,” Materials Research Innovations, 15(1), pp 426–430. doi:https://doi.org/10.1179/143307511X12858957675435
- Merklein, M. and Lechler, J. (2006), “Investigation of the Thermo-Mechanical Properties of Hot Stamping Steels,” Journal of Materials Processing Technology, 177(1–3), pp 452–455. doi:https://doi.org/10.1016/j.jmatprotec.2006.03.233
- Lenze, F. J., Sikora, S., Banik, J., and Straube, O. (2009), “Hot Forming—New Potentials for Innovative Manufacturing,” Steel Grips, 6, pp 428–432.
- Fan, D. W., Kim, H. S., and De Cooman, B. C. (2009), “A Review of the Physical Metallurgy Related to the Hot Press Forming of Advanced High Strength Steel,” Steel Research International, 80(3), pp 241–248.
- Ozturk, F., Toros, S., and Kilic, S. (2009), “Tensile and Spring-Back Behavior of DP600 Advanced High Strength Steel at Warm Temperatures,” Journal of Iron and Steel Research International, 16(6), pp 41–46. doi:https://doi.org/10.1016/S1006-706X(10)60025-8
- Tian, X., Zhang, Y., and Li, J. (2012), “Investigation on Tribological Behavior of Advanced High Strength Steels: Influence of Hot Stamping Process Parameters,” Tribology Letters, 45(3), pp 489–495. doi:https://doi.org/10.1007/s11249-011-9908-1
- Yanagida, A. and Azushima, A. (2009), “Evaluation of Coefficients of Friction in Hot Stamping by Hot Flat Drawing Test,” CIRP Annals - Manufacturing Technology, 58(1), pp 247–250. doi:https://doi.org/10.1016/j.cirp.2009.03.091
- Ghiotti, A., Bruschi, S., Sgarabotto, F., and Bariani, P. F. (2014), “Tribological Performances of Zn-Based Coating in Direct Hot Stamping,” Tribology International, 78(4), pp 142–151. doi:https://doi.org/10.1016/j.triboint.2014.05.007
- Bergman, G. and Oldenburg, M. (2004), “A Finite Element Model for Thermomechanical Analysis of Sheet Metal Forming,” International Journal for Numerical Methods in Engineering, 59(9), pp 1167–1186. doi:https://doi.org/10.1002/nme.911
- Hardell, J. and Prakash, B. (2008), “High-Temperature Friction and Wear Behaviour of Different Tool Steels during Sliding against Al-Si-Coated High-Strength Steel,” Tribology International, 41(7), pp 663–671. doi:https://doi.org/10.1016/j.triboint.2007.07.013
- Mu, Y., Wang, B., Huang, M., Zhou, J., and Li, X. (2016), “Investigation on Tribological Characteristics of Boron Steel 22MnB5-Tool Steel h13 Tribopair at High Temperature,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 208–210, pp 1994–1996.
- Pelcastre, L., Hardell, J., and Prakash B. (2011), “Investigations into the Occurrence of Galling during Hot Forming of Al-Si-Coated High-Strength Steel,” International Workshop on Software and Compilers for Embedded Systems, 225, pp 487–498.
- Hardell, J., Hernandez, S., Mozgovoy, S., Pelcastre, L., Courbon, C., and Prakash, B. (2015), “Effect of Oxide Layers and Near Surface Transformations on Friction and Wear during Tool Steel and Boron Steel Interaction at High Temperatures,” International Journal of Offshore and Polar Engineering, 24(1), pp 35–44.
- Mozgovoy, S., Hardell, J., Deng, L., Oldenburg, M., and Prakash, B. (2014), “Effect of Temperature on Friction and Wear of Prehardened Tool Steel during Sliding against 22MnB5 Steel,” Tribology - Materials, Surfaces and Interfaces, 8, pp 65–73. doi:https://doi.org/10.1179/1751584X13Y.0000000056
- Hardell, J., Kassfeldt, E., and Prakash, B. (2008), “Friction and Wear Behaviour of High Strength Boron Steel at Elevated Temperatures of up to 800 °C,” Wear, 264(9–10), pp 788–799. doi:https://doi.org/10.1016/j.wear.2006.12.077
- Azushima, A., Uda, K., and Yanagida, A. (2012), “Friction Behavior of Aluminum-Coated 22MnB5 in Hot Stamping under Dry and Lubricated Conditions,” Journal of Materials Processing Technology, 212(5), pp 1014–1021. doi:https://doi.org/10.1016/j.jmatprotec.2011.12.009
- Azushima, A., Uda, K., and Yanagida, A. (2014), “Thermal Behavior of Aluminum-Coated 22MnB5 in Hot Stamping under Dry and Lubricated Conditions,” Journal of Materials Processing Technology, 214(12), pp 3031–3036. doi:https://doi.org/10.1016/j.jmatprotec.2014.07.003
- Hu, P., Ying, L., Li, Y., and Liao, Z. (2013), “Effect of Oxide Scale on Temperature-Dependent Interfacial Heat Transfer in Hot Stamping Process,” Journal of Materials Processing Technology, 213(9), pp 1475–1483. doi:https://doi.org/10.1016/j.jmatprotec.2013.03.010
- Tekdir, H. and Yetim, A. F. (2020), “Additive Manufacturing of Multiple Layered Materials (Ti6Al4V/316L) and Improving Their Tribological Properties with Glow Discharge Surface Modification,” Vacuum, 184. pp 109893.1–109893.8. doi:https://doi.org/10.1016/j.vacuum.2020.109893
- Yetim, A. F. (2010), “Investigation of Wear Behavior of Titanium Oxide Films, Produced by Anodic Oxidation, on Commercially Pure Titanium in Vacuum Conditions,” Surface and Coatings Technology, 205(6), pp 1757–1763. doi:https://doi.org/10.1016/j.surfcoat.2010.08.079
- Stott, F. H. (1998), “The Role of Oxidation in the Wear of Alloys,” Tribology International, 31(1), pp 61–71. doi:https://doi.org/10.1016/S0301-679X(98)00008-5
- Hardell, J., Hernandez, S., Mozgovoy, S., Pelcastre, L., Courbon, C., and Prakash, B. (2015), “Effect of Oxide Layers and Near Surface Transformations on Friction and Wear during Tool Steel and Boron Steel Interaction at High Temperatures,” Wear, 330–331, pp 223–229. doi:https://doi.org/10.1016/j.wear.2015.02.040
- Gåård, A., Krakhmalev, P., and Bergström, J. (2009), “Wear Mechanisms in Galling: Cold Work Tool Materials Sliding against High-Strength Carbon Steel Sheets,” Tribology Letters, 33(1), pp 45–53. doi:https://doi.org/10.1007/s11249-008-9390-6
- Venturato, G., Novella, M., and Bruschi, S. (2017), “Effects of Phase Transformation in Hot Stamping of 22MnB5 High Strength Steel,” Procedia Engineering, 183, pp 316–321. doi:https://doi.org/10.1016/j.proeng.2017.04.045
- Inman, I. A., Datta, P. K., Du, H. L., Burnell-Gray, J. S., and Luo, Q. (2006), “Studies of High Temperature Sliding Wear of Metallic Dissimilar Interfaces,” Tribology International, 44(9), pp 1902–1919.