References
- Ito, H., Tomaru, M., and Suzuki., T. (1988), "Physical and Chemical Aspects of Grease Deterioration in Sealed Ball Bearings," Lubr. Eng. 44, pp 872–879.
- ASTM (1998), "Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)," 1(65), pp 1–5. W. Conshohocken, PA.
- Shah, R., Jiang, J., and Kaperick, J. (n.d.), "Next-Generation NLGI Grease Specifications," NLGI Spokesm.
- Shetty, P., Meijer, R. J., and Lugt, P. M. (2021), "An Evaporation Model for Base Oil From Grease Lubricated Rolling Bearings Including Breathing," Tribol. Trans. pp 5–24.
- Osara, J. A., and Bryant, M. D. (2019), "Thermodynamics of Grease Degradation, Tribol. Int. 137, pp 433–445. doi:https://doi.org/10.1016/j.triboint.2019.05.020
- Reyes-Gavilan, J. L., and Odorisio, P. (2001), "A Review of the Mechanisms of Action of Antioxidants, Metal Deactivators, and Corrosion Inhibitors," NLGI Spokesm., 64, pp 22–33.
- Kondepudi, D., and Prigogine, I. (1998), Modern Thermodynamics, John Wiley & Sons: Hoboken, NJ.
- Rhee, I.-S. (n.d.), "Decomposition Kinetics of Greases by Thermal Analysis." Presented at 74th NLGI Annu. Meet., Scottsdale, AZ.
- Rohatgi, A. (2021), WebPlotDigitizer, https://automeris.io/WebPlotDigitizer.
- Bryant, M. D., Khonsari, M. M., and Ling, F. F. (2008), "On the Thermodynamics of Degradation LK," Proc. Math. Phys. Eng. Sci. TA TT, 464, pp 2001–2014, https://ut.on.worldcat.org/oclc/5554366074.
- Osara, J. A., and Bryant, M. D. (2021), "Performance and Degradation Characterization of Electrochemical Power Sources Using Thermodynamics, Electrochim. Acta, 365, pp 137337. doi:https://doi.org/10.1016/j.electacta.2020.137337
- Osara, J., and Bryant, M. (2019), "A Thermodynamic Model for Lithium-Ion Battery Degradation: Application of the Degradation-Entropy Generation Theorem," Inventions, 4, pp 23. doi:https://doi.org/10.3390/inventions4020023
- Osara, J. A. (2017), "Thermodynamics of Degradation," The University of Texas at Austin. https://doi.org/10.15781/T2Z892W3V.
- Osara, J. A., and Bryant, M. D. (2019), "Thermodynamics of Lead-Acid Battery Degradation: Application of the Degradation-Entropy Generation Methodology," J. Electrochem. Soc., 166. doi:https://doi.org/10.1149/2.0651916jes
- Osara, J. A., and Bryant, M. D. (2019), "Thermodynamics of Fatigue: Degradation-Entropy Generation Methodology for System and Process Characterization and Failure Analysis," Entropy, 21. doi:https://doi.org/10.3390/e21070685
- Osara, J. A., and Bryant, M. D. (2020), "A Temperature-Only System Degradation Analysis Based on Thermal Entropy and the Degradation-Entropy Generation Methodology," Int. J. Heat Mass Transf., 158. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2020.120051
- Rezasoltani, A., and Khonsari, M. M. (2014), "On the Correlation Between Mechanical Degradation of Lubricating Grease and Entropy," Tribol. Lett. 56, pp 197–204. doi:https://doi.org/10.1007/s11249-014-0399-8
- Lijesh, K. P., and Khonsari, M. M. (2019), "On the Assessment of Mechanical Degradation of Grease Using Entropy Generation Rate," Tribol. Lett., 67, pp 1–13. https://doi.org/10.1007/s11249-019-1165-8.
- Callen, H. B. (1985), Thermodynamics and an Introduction to Thermostatistics, John Wiley & Sons: Hoboken, NJ.
- Moran, M. J., Shapiro, H. N., Boettner, D. D., and Bailey, M. B. (2014), Fundamentals of Engineering Thermodynamics, 8th ed., Wiley: Hoboken, NJ. https://doi.org/10.7227/ijmee.29.1.2.
- Rezasoltani, A., and Khonsari, M. M. (2019), "Experimental Investigation of the Chemical Degradation of Lubricating Grease From an Energy Point of View," Tribol. Int., 137, pp 289–302. doi:https://doi.org/10.1016/j.triboint.2019.05.006