References
- Yang, S. K., Zhang, X. H., Zhou, X. M., and Wang, H. (2019), “NPP Main Steam Safety Valve Inner-leakage Analysis and Solution,” Hydraulics Pneumatics & Seals, 12, pp 85–88.
- Ejaz, M., Mahmoud, E. R. I., and Khan, S. Z. (2020), “The Investigation of the Fatigue Failure of Nickel-Based Superalloy 718 Choke Valve Stems Used in Offshore Subsea Water Injection Service,” Engineering Failure Analysis, 110, pp 104434. doi:https://doi.org/10.1016/j.engfailanal.2020.104434
- Cattant, F., Crusset, D., and Féron, D. (2008), “Corrosion Issues in Nuclear Industry Today,” Materials Today, 11(10), pp 32–37. doi:https://doi.org/10.1016/S1369-7021(08)70205-0
- Liu, X.-B., Fu, G.-Y., Liu, S., Shi, S.-H., He, X.-M., and Wang, M.-D. (2011), “High Temperature Wear and Corrosion Resistance of Co-Free Ni-Based Alloy Coatings on Nuclear Valve Sealing Surfaces,” Nuclear Engineering and Design, 241(12), pp 4924–4928. doi:https://doi.org/10.1016/j.nucengdes.2011.09.021
- Mann, B. S., and Prakash, B. (2000), “High Temperature Friction and Wear Characteristics of Various Coating Materials for Steam Valve Spindle Application,” Wear, 240, pp 223–230. doi:https://doi.org/10.1016/S0043-1648(00)00390-2
- Pulsford, J., Venturi, F., Kamnis, S., and Hussain, T. (2020), “Sliding Wear Behaviour of WC-Co Reinforced NiCrFeSiB HVOAF Thermal Spray Coatings Against WC-Co and Al2O3 Counterbodies,” Surface and Coatings Technology, 386, pp 125468. doi:https://doi.org/10.1016/j.surfcoat.2020.125468
- Xu, J.-S., Zhang, X.-C., Xuan, F.-Z., Wang, Z.-D., and Tu, S.-T. (2014), “Rolling Contact Fatigue Behavior of Laser Cladded WC/Ni Composite Coating,” Surface and Coatings Technology, 239, pp 7–15. doi:https://doi.org/10.1016/j.surfcoat.2013.11.005
- Tobar, M. J., Álvarez, C., Amado, J. M., Rodríguez, G., and Yánez, A. (2006), “Morphology and Characterization of Laser Clad Composite NiCrBSi–WC Coatings on Stainless Steel,” Surface & Coatings Technology, 200(22–23), pp 6313–6317.
- Huang, S. M., Sun, D. Q., Xu, D. S., Wang, W. Q., and Xu, H. Y. (2015), “Microstructures and Properties of NiCrBSi/WC Biomimetic Coatings Prepared by Plasma Spray Welding,” Journal of Bionic Engineering, 12(4), pp 592–603. doi:https://doi.org/10.1016/S1672-6529(14)60149-9
- Liu, S. L., and Zheng, X. P. (2009), “Microstructure and Properties of AC-HVAF Sprayed Ni60/WC Composite Coating,” Journal of Alloys and Compounds, 480(2), pp 254–258. doi:https://doi.org/10.1016/j.jallcom.2009.02.028
- Jafari, M., Han, J.-C., Seol, J.-B., and Park, C.-G. (2017), “Tribological Properties of HVOF-Sprayed WC-Co Coatings Deposited From Ni-Plated Powders at Elevated Temperature,” Surface and Coatings Technology, 327, pp 48–58. doi:https://doi.org/10.1016/j.surfcoat.2017.08.026
- Luo, F., Cockburn, A., Sparkes, M., Lupoi, R., Chen, Z.-J., O'neill, W., Yao, J.-H., and Liu, R. (2015), “Performance Characterization of Ni60-WC Coating on Steel Processed With Supersonic Laser Deposition,” Defence Technology, 11(1), pp 35–47. doi:https://doi.org/10.1016/j.dt.2014.09.003
- Xu, J.-S., Zhang, X.-C., Xuan, F.-Z., Tian, F.-Q., Wang, Z.-D., and Tu, S.-T. (2013), “Tensile Properties and Fracture Behavior of Laser Cladded WC/Ni Composite Coatings With Different Contents of WC Particle Studied by In-Situ Tensile Testing,” Materials Science and Engineering: A, 560, pp 744–751. doi:https://doi.org/10.1016/j.msea.2012.10.028
- Fu, G. Y., Liu, S., and Fan, J. W. (2011), “The Design of Cobalt-Free, Nickel-Based Alloy Powder (Ni-3) Used for Sealing Surfaces of Nuclear Power Valves and Its Structure of Laser Cladding Coating,” Nuclear Engineering and Design, 241(5), pp 1403–1406. doi:https://doi.org/10.1016/j.nucengdes.2011.01.020
- González, R., Cadenas, M., Fernández, R., Cortizo, J. L., and Rodríguez, E. (2007), “Wear Behaviour of Flame Sprayed NiCrBSi Coating Remelted by Flame or by Laser,” Wear, 262(3–4), pp 301–307. doi:https://doi.org/10.1016/j.wear.2006.05.009
- Li, W. Y., Yang, X. F., Xiao, J. P., and Hou, Q. M. (2021), “Effect of WC Mass Fraction on the Microstructure and Friction Properties of WC/Ni60 Laser Cladding Layer of Brake Discs,” Ceramics International, 47(20), pp 28754–28763. doi:https://doi.org/10.1016/j.ceramint.2021.07.035
- Liu, S., Sun, D., Fan, Z., Yu, H.-Y., and Meng, H.-M. (2008), “The Influence of HVAF Powder Feedstock Characteristics on the Sliding Wear Behaviour of WC–NiCr Coatings,” Surface and Coatings Technology, 202(20), pp 4893–4900. doi:https://doi.org/10.1016/j.surfcoat.2008.03.014
- Liu, S. L., Zheng, X. P., and Geng, G. Q. (2010), “Dry Sliding Wear Behavior and Corrosion Resistance of NiCrBSi Coating Deposited by Activated Combustion-High Velocity Air Fuel Spray Process,” Materials & Design, 31(2), pp 913–917. doi:https://doi.org/10.1016/j.matdes.2009.07.034
- Song, B., Voisey, K. T., and Hussain, T. (2018), “High Temperature Chlorine-Induced Corrosion of Ni50Cr Coating: HVOLF, HVOGF, Cold Spray and Laser Cladding,” Surface and Coatings Technology, 337, pp 357–369. doi:https://doi.org/10.1016/j.surfcoat.2018.01.025
- Tao, K., Zhang, J., Cui, H., Zhou, X.-L., and Zhang, J.-S. (2008), “Fabrication of Conventional and Nanostructured NiCrC Coatings via HVAF Technique,” Transactions of Nonferrous Metals Society of China, 18(2), pp 262–269. doi:https://doi.org/10.1016/S1003-6326(08)60046-1
- Tao, K., Zhou, X.-L., Cui, H., and Zhang, J.-S. (2009), “Oxidation and Hot Corrosion Behaviors of HVAF-Sprayed Conventional and Nanostructured NiCrC Coatings,” Transactions of Nonferrous Metals Society of China, 19(5), pp 1151–1160. doi:https://doi.org/10.1016/S1003-6326(08)60421-5
- Bolelli, G., Milanti, A., Lusvarghi, L., Trombi, L., Koivuluoto, H., and Vuoristo, P. (2016), “Wear and Impact Behaviour of High Velocity Air-Fuel Sprayed Fe–Cr–Ni–B–C Alloy Coatings,” Tribology International, 95, pp 372–390. doi:https://doi.org/10.1016/j.triboint.2015.11.036
- Karaoglanli, A. C., Oge, M., Doleker, K. M., and Hotamis, M. (2017), “Comparison of Tribological Properties of HVOF Sprayed Coatings With Different Composition,” Surface and Coatings Technology, 318, pp 299–308. doi:https://doi.org/10.1016/j.surfcoat.2017.02.021
- Bergant, Z., Trdan, U., and Grum, J. (2014), “Effect of High-Temperature Furnace Treatment on the Microstructure and Corrosion Behavior of NiCrBSi Flame-Sprayed Coatings,” Corrosion Science, 88, pp 372–386. doi:https://doi.org/10.1016/j.corsci.2014.07.057
- Sha, C. H., Zhou, Z. F., Xie, Z. H., and Munroe, P. (2020), “FeMnNiCoCr-Based High Entropy Alloy Coatings: Effect of Nitrogen Additions on Microstructural Development, Mechanical Properties and Tribological Performance,” Applied Surface Science, 507, pp 145101. doi:https://doi.org/10.1016/j.apsusc.2019.145101
- Milanti, A., Matikainen, V., Koivuluoto, H., Bolelli, G., Lusvarghi, L., and Vuoristo, P. (2015), “Effect of Spraying Parameters on the Microstructural and Corrosion Properties of HVAF-Sprayed Fe–Cr–Ni–B–C Coatings,” Surface and Coatings Technology, 277, pp 81–90. doi:https://doi.org/10.1016/j.surfcoat.2015.07.018
- Miliyanchuk, K., Havela, L., Tsaruk, Y., Maskova, S., and Gladyshevskii, R. (2015), “Hydrogen Absorption in R2T2M Compounds With the W2CoB2-Type Structure,” Journal of Alloys and Compounds, 647, pp 911–916. doi:https://doi.org/10.1016/j.jallcom.2015.06.120
- Ding, K. Y., Wang, L. J., Sun, Z., and Liu, Y. K. (2014), “Effect of Isothermal Heat Treatment on Mechanical Properties of WC-17Co Coatings,” Rare Metal Materials and Engineering, 43(10), pp 2365–2369.
- He, J., Ice, M., and Lavernia, E. J. (2000), “Synthesis of Nanostructured Cr3C2-25(Ni20Cr) Coatings,” Metallurgical & Materials Transactions A, 31(2), pp 555–564.
- Guo, H. X., Liu, Z. Y., Wang, Y. X., and Li, J. L. (2021), “Tribological Mechanism of Micro-Arc Oxidation Coatings Prepared by Different Electrolyte Systems in Artificial Seawater,” Ceramics International, 47(6), pp 7344–7352. doi:https://doi.org/10.1016/j.ceramint.2020.11.169
- Geng, Z., Hou, S. H., Shi, G. L., Duan, D. L., and Li, S. (2016), “Tribological Behaviour at Various Temperatures of WC-Co Coatings Prepared Using Different Thermal Spraying Techniques,” Tribology International, 104, pp 36–44. doi:https://doi.org/10.1016/j.triboint.2016.08.025
- Sahraoui, T., Fenineche, NE., Montavon, G., and Coddet, C. (2003), “Structure and Wear Behaviour of HVOF Sprayed Cr3C2–NiCr and WC–Co Coatings,” Materials & Design, 24, pp 309–313.
- Parthasarathi, N. L., and Duraiselvam, M. (2010), “High Temperature Tribological Properties of NiCrBSiCFe Plasma-Sprayed Coating on Austenitic Stainless Steel Substrate,” Journal of Alloys and Compounds, 505(2), pp 824–831. doi:https://doi.org/10.1016/j.jallcom.2010.06.149
- Shi, P., Yi, G., Wan, S., Sun, H., Feng, X., Pham, S. T., Tieu, K. A., Xie, E., and Wang, Q. (2021), “High Temperature Tribological Performance of Nickel-Based Composite Coatings by Incorporating Multiple Oxides (TiO2-ZnO-MoO3),” Tribology International, 155, pp 106759. doi:https://doi.org/10.1016/j.triboint.2020.106759
- Sun, H. W., Wan, S. H., Yi, G. W., Yang, J., and Cheng, J. (2021), “Friction and Wear Behaviors of NiAl–Bi2O3–Ag–Cr2O3 Composite Coating in the Thermal Cycle of RT-800 °C,” Tribology International, 159(3), pp 106957. doi:https://doi.org/10.1016/j.triboint.2021.106957
- Economou, S., Bontev, M. D., Celis, J. P., Smith, R. W., and Lugscheider, E. (2000), “Tribological Behaviour at Room Temperature and at 550 °C of TiC-Based Plasma Sprayed Coatings in Fretting Gross Slip Conditions,” Wear, 244, pp 165–179. doi:https://doi.org/10.1016/S0043-1648(00)00455-5
- Shi, P. Y., Yu, Y., Xiong, N. N., Liu, M. Z., and Wang, Q. H. (2020), “Microstructure and Tribological Behavior of a Novel Atmospheric Plasma Sprayed AlCoCrFeNi High Entropy Alloy Matrix Self-Lubricating Composite Coating,” Tribology International, 151, pp 106470. doi:https://doi.org/10.1016/j.triboint.2020.106470
- Tian, H. L., Wang, C. L., Guo, M. Q., Tang, Z. H., Wei, S. C., and Xu, B. S. (2018), “Frictional Wear Performance Under Oil-Lubricated Conditions and Wear Resistance Mechanism of High-Velocity Arc-Sprayed FeNiCrAl Coating,” Surface & Coatings Technology, 353, pp 237–246.
- Vashishtha, N., Sapate, S. G., Bagde, P., and Rathod, A. B. (2017), “Effect of Heat Treatment on Friction and Abrasive Wear Behavior of WC-12Co and Cr3C2-25NiCr Coatings,” Tribology International, 118, pp 381–399. doi:https://doi.org/10.1016/j.triboint.2017.10.017