References
- ASTM D445-19a (2019), “Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity),” ASTM International: West Conshohocken, PA.
- ASTM D4683-20 (2020), “Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 °C,” ASTM International: West Conshohocken, PA.
- ASTM D4741-20 (2020), “Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer,” ASTM International: West Conshohocken, PA.
- ASTM D2783-19 (2019), “Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method),” ASTM International: West Conshohocken, PA.
- ASTM D2782-17 (2017), “Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method),” ASTM International: West Conshohocken, PA.
- ASTM D5182-19 (2019), “Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method),” ASTM International: West Conshohocken, PA.
- ASTM D2266-01(2015), “Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method),” ASTM International: West Conshohocken, PA.
- DIN 51819-1:2016-12 (2016), “Testing of Lubricants—Mechanical-Dynamic Testing in the Roller Bearing Test Apparatus FE8—Part 1: General Working Principles,” Beuth Publishing DIN: Germany.
- ISO/TS 6336-22:2018, “Calculation of Load Capacity of Spur and Helical Gears. Part 22: Calculation of Micropitting Load Capacity,” Geneva, Switzerland (2018).
- Stribeck, R. (1901), “Kugellager für beliebige Belastungen, “Zeitschrift des Vereines deutscher Ingenieure, 45(3), pp 73–79 (pt I) & 45(4), pp 118–125 (pt II).
- ASTM D5183-05(2016), “Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine,” ASTM International: West Conshohocken, PA.
- ASTM G99-17 (2017), “Standard Test Method for Wear Testing With a Pin-on-Disk Apparatus,” ASTM International: West Conshohocken, PA.
- Costello, M. T. (2005), “Effects of Basestock and Additive Chemistry on Traction Testing,” Tribology Letters, 18, pp 91–97. doi:10.1007/s11249-004-1761-z
- Luiz, J. F., and Spikes, H. (2020), “Tribofilm Formation, Friction and Wear-Reducing Properties of Some Phosphorus-Containing Antiwear Additives,” Tribology Letters, 68, p 75. doi:10.1007/s11249-020-01315-8
- Fan, J., Müller, M., Stöhr, T., and Spikes, H. A. (2007), “Reduction of Friction by Functionalised Viscosity Index Improvers,” Tribology Letters, 28, pp 287–298. doi:10.1007/s11249-007-9272-3
- Taylor, L. J., and Spikes, H. A. (2003), “Friction-Enhancing Properties of ZDDP Antiwear Additive: Part I—Friction and Morphology of ZDDP Reaction Films,” Tribology Transactions, 46(3), pp 303–309. doi:http://doi.org/10.1080/10402000308982630
- Rycerz, P., and Kadiric, A. (2019), “The Influence of Slide–Roll Ratio on the Extent of Micropitting Damage in Rolling–Sliding Contacts Pertinent to Gear Applications,” Tribology Letters, 67, p 63. doi:10.1007/s11249-019-1174-7
- Fujita, H., Glovnea, R. P., and Spikes, H. A. (2005), “Study of Zinc Dialkydithiophosphate Antiwear Film Formation and Removal Processes, Part I: Experimental,” Tribology Transactions, 48(4), pp 558–566. doi:http://doi.org/10.1080/05698190500385211
- Dawczyk, J., Morgan, N., Russo, J., and Spikes, H. (2019), “Film Thickness and Friction of ZDDP Tribofilms,” Tribology Letters, 67, p 34. doi:10.1007/s11249-019-1148-9
- Luiz, J. F., and Spikes, H. (2020), “Tribofilm Formation, Friction and Wear-Reducing Properties of Some Phosphorus-Containing Antiwear Additives,” Tribology Letters, 68, p 75. doi:10.1007/s11249-020-01315-8
- Guevremont, J. M., Garelick, K., Loper, J., Lagona, J., Sheets, R., Hux, K., and Devlin, M. T. (2010), “Influence of Friction Modifiers on Boundary Film Formation Properties,” In Proceedings of the 65th STLE Annual Meeting and Exhibition, Las Vegas, NV, USA.
- MTM Instrument, http://www.pcs-instruments.com/product/mtm (accessed 25 April 2022).
- Hamrock, B., and Dowson, D. (1981), Ball Bearing Lubrication, the Elastohydrodynamics of Elliptical Contacts, John Wiley & Sons: New York. ISBN 13: 9780471035534.
- So, B. Y. C., and Klaus, E. E. (1980), “Viscosity–Pressure Correlation of Liquids,” ASLE Transactions, 23(4), pp 409–421. doi:10.1080/05698198008982986
- ASTM D341-20e1 (2020), “Standard Practice for Viscosity-Temperature Equations and Charts for Liquid Petroleum or Hydrocarbon Products,” ASTM International: West Conshohocken, PA.
- Spikes, H. A., and Cann, P. M. (2001), “The Development and Application of the Spacer Layer Imaging Method for Measuring Lubricant Film Thickness,” Proceedings Institute of Mechanical Engineers Part J: Journal of Engineering Tribology, 215(3), pp 261–277. doi:10.1243/1350650011543529
- Vengudusamy, B., Enekes, C., and Spallek, R. (2020), “EHD Friction Properties of ISO VG 320 Gear Oils With Smooth and Rough Surfaces,” Friction, 8, pp 164–181. doi:10.1007/s40544-019-0267-5
- Myant, C., Spikes, H. A., and Stokes, J. R. (2010), “Influence of Load and Elastic Properties on the Rolling and Sliding Friction of Lubricated Compliant Contacts,” Tribology International, 43, pp 55–63. doi:10.1016/j.triboint.2009.04.034
- Campen, S., Green, J., Lamb, G., Atkinson, D., and Spikes, H. (2012), “On the Increase in Boundary Friction with Sliding Speed,” Tribology Letters, 48, pp 237–248. doi:10.1007/s11249-012-0019-4
- Holtzinger, J., Green, J., Lamb, G., Atkinson, D., and Spikes, H. (2012), “New Method of Measuring Permanent Viscosity Loss of Polymer-Containing Lubricants,” Tribology Transactions, 55(5), pp 631–639. doi:10.1080/10402004.2012.688931
- Pagkalis, K., Spikes, H., Jelita Rydel, J. Ingram, M., and Kadiric, A. (2021), “The Influence of Steel Composition on the Formation and Effectiveness of Anti-wear Films in Tribological Contacts,” Tribology Letters, 69, p 75. doi:10.1007/s11249-021-01438-6
- Blok, H. (1937), “Theoretical Study of Temperature Rise at Surfaces of Actual Contact Under Oiliness Lubricating Conditions, General Discussions on Lubrication,” Institute of Mechanical Engineers, 2, pp 222–235.