Experimental Measurements of Oil Films in a Dynamically Loaded Journal Bearing

References

• Malcolm, P. L. E. (2001), Understanding Journal Bearings, Applied Machinery Dynamics Co.: Durango, CO.
   Google Scholar
• Bhushan, B. and Dashnaw, F. (1981), “Material Study for Advanced Stern-Tube Bearings and Face Seals,” ASLE Transactions, 24(3), pp 398–409. doi:10.1080/05698198108983037
   Google Scholar
• Booser, R. E. (1997), Tribology Data Handbook, The Society of Tribologists and Lubrication Engineers: New York.
   Google Scholar
• Barrett, E. and Gunter, L. E. (1975), Steady-State and Transient Analysis of a Squeeze Film Damper Bearing for Rotor Stability, National Aeronautics and Space Administration: Washington, DC.
   Google Scholar
• Wang, D., Keith, T. G., Yang, Q., and Vaidyanathan, K. (2004), “Lubrication Analysis of a Connecting-Rod Bearing in a High-Speed Engine. Part I: Rod and Bearing Deformation,” Tribology Transactions, 47(2), pp 280–289.
   Web of Science ®Google Scholar
• Waukesha Bearings. (2019), “Tilt Pad Journal Bearings.” Available at: https://www.waukbearing.com/en/engineered-fluid-film/product-lines/journal-bearings/tilt-pad-journal-bearings/ (accessed May 4, 2022).
   Google Scholar
• Gong, R. Z., Li, D. Y., Wang, H. J., Han, L., and Qin, D. Q. (2016), “Analytical Solution of Reynolds Equation under Dynamic Conditions,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 230(4), pp 416–427. doi:10.1177/1350650115604654
   Web of Science ®Google Scholar
• Booker, J. F. (1965), “Dynamically Loaded Journal Bearings: Mobility Method of Solution,” Journal of Fluids Engineering, 87(3), pp 537–546. doi:10.1115/1.3650602
   Web of Science ®Google Scholar
• Park, M., Jang, S., and Min, K. (2020), “Non-Newtonian Fluid Application of The Mobility Method in Engine Journal Bearing,” International Journal of Automotive Technology, 21(5), pp 1303–1313. 10.1007/s12239-012-0027-2.
   Web of Science ®Google Scholar
• Mufti, R. A. and Priest, M. (2009), “Theoretical and Experimental Evaluation of Engine Bearing Performance,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 223(4), pp 629–644. doi:10.1243/13506501JET487
   Google Scholar
• Kataoka, T., Kikuchi, T., and Ashihara, K. (2011), “Measurement of Oil Film Thickness in the Main Bearings of an Operating Engine Using Thin-Film Electrode,” SAE International Journal of Fuels and Lubricants, 5(1), pp 425–433. doi:10.4271/2011-01-2117
   Google Scholar
• Moreau, H., Maspeyrot, P., Bonneau, D., and Frène, J. (2002), “Comparison between Experimental Film Thickness Measurements and Elastohydrodynamic Analysis in a Connecting-Rod Bearing,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 216(4), pp 195–208. doi:10.1243/135065002760199952
   Google Scholar
• Kasolang, S. and Dwyer-Joyce, R. S. (2008), “Observations of Film Thickness Profile and Cavitation around a Journal Bearing Circumference,” Tribology Transactions, 51(2), pp 231–245. 10.1080/10402000801947717.
   Web of Science ®Google Scholar
• Ouyang, W., Zhou, Z., Jin, Y., Yan, X., and Liu, Y. (2020), “Ultrasonic Measurement of Lubricant Film Thickness Distribution of Journal Bearing,” Review of Scientific Instruments, 91, pp 065111. doi:10.1063/5.0007481
   PubMed Web of Science ®Google Scholar
• Fillon, M. and Bouyer, J. (2004), “Thermohydrodynamic Analysis of a Worn Plain Journal Bearing,” Tribology International, 37(2), pp 129–136. doi:10.1016/S0301-679X(03)00051-3
   Web of Science ®Google Scholar
• Welsh, J. (1983), Plain Bearing Design Handbook, Butterworth-Heinemann: Boston.
   Google Scholar
• Masuda, T., Ushijima, K., and Hamai, K. (2008), “A Measurement of Oil Film Pressure Distribution in Connecting Rod Bearing with Test Rig,” Tribology Transactions, 35(1), pp 71–76. doi:10.1080/10402009208982091
   Google Scholar
• Del Piezo. (2017), “Material Specification Sheet.” Available at: https://delpiezo.com/yahoositeadmin/assets/docs/MaterialSpecificationSheet.254613.pdf (accessed May 4, 2022).
   Google Scholar
• Matweb. (2018), “Morgan Advanced Ceramics Piezo Materials for Medical Devices PZT-5A Piezoceramic Material.” Available at: https://www.matweb.com/search/datasheet.aspx?matguid=7a480a939b39441ea856bc44623a76cc&ckck=1 (accessed May 4, 2022).
   Google Scholar
• Hunter, A., Dwyer-Joyce, R., and Harper, P. (2012), “Calibration and Validation of Ultrasonic Reflection Methods for Thin-Film Measurement in Tribology,” Measurement Science and Technology, 23(10), pp 105605. doi:10.1088/0957-0233/23/10/105605
   Web of Science ®Google Scholar
• Drinkwater, B. W., Dwyer-Joyce, R. S., and Cawley, P. (1996), “A Study of the Interaction between Ultrasound and a Partially Contacting Solid–Solid Interface,” Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 452(1955), pp 2613–2628.
   Web of Science ®Google Scholar
• Yu, M., Shen, L., Mutasa, T., Dou, P., Wu, T., and Reddyhoff, T. (2020), “Exact Analytical Solution to Ultrasonic Interfacial Reflection Enabling Optimal Oil Film Thickness Measurement,” Tribology International, 151, pp 106522. doi:10.1016/j.triboint.2020.106522
   Web of Science ®Google Scholar
• Reddyhoff, T., Kasolang, S., Dwyer-Joyce, R. S., and Drinkwater, B. W. (2005), “The Phase Shift of an Ultrasonic Pulse at an Oil Layer and Determination of Film Thickness,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 219(6), pp 387–400. doi:10.1243/135065005X34044
   Google Scholar
• Beamish, S., Li, X., Brunskill, H., Hunter, A., and Dwyer-Joyce, R. (2020), “Circumferential Film Thickness Measurement in Journal Bearings via the Ultrasonic Technique,” Tribology International, 148, pp 106295. https://linkinghub.elsevier.com/retrieve/pii/S0301679X20301377.
   Web of Science ®Google Scholar
• Stachowiak, G. W. and Batchelor, A. W. (1993), Engineering Tribology, US: Butterworth-Heinemann.
   Google Scholar
• Raimondi, A. A. and Boyd, J. (1958), “A Solution for the Finite Journal Bearing and Its Application to Analysis and Design,” ASLE Transactions, 1(1), pp 159–174. doi:10.1080/05698195808972328
   Google Scholar
• Jang, J. Y. and Khonsari, M. M. (2015), “On the Characteristics of Misaligned Journal Bearings,” Lubricants, 3(1), pp. 27–53. doi:10.3390/lubricants3010027
   Google Scholar