Influence of Pits on the Tribological Properties and Friction-Induced Vibration Noise of Textured Tapered Roller Bearings

References

• Jat, A., and Tiwari, R. (2020), “Multi-Objective Optimization of Spherical Roller Bearings Based on Fatigue and Wear Using Evolutionary Algorithm,” Journal of King Saud University-Engineering Sciences, 32(1), pp. 58–68. doi:10.1016/j.jksues.2018.03.002
   Google Scholar
• Tiwari, R., Sunil, K.K., and Reddy, R. (2012), “An Optimal Design Methodology of Tapered Roller Bearings Using Genetic Algorithms,” International Journal for Computational Methods in Engineering Science and Mechanics, 13(2), pp 108–127. doi:10.1080/15502287.2011.654375
   Google Scholar
• Eschmann, P., and Hasbargen, L. (1999), Ball and Roller Bearings: Theory, Design and Application. 3rd ed. Chichester: Wiley, ISBN 0471984523.
   Google Scholar
• El-Thalji, I., and Jantunen, E. (2014), “A Descriptive Model of Wear Evolution in Rolling Bearings,” Engineering Failure Analysis, 45, pp 204–224. doi:10.1016/j.engfailanal.2014.06.004
   Web of Science ®Google Scholar
• Zhang, J., Yang, D., Rosenkranz, A., Zhang, J., Zhao, L., Song, C., Yan, Y., and Sun, T. (2018), “Laser Surface Texturing of Stainless Steel - Effect of Pulse Duration on Texture’s Morphology and Frictional Response,” Advanced Engineering Materials, 21, pp 1–7. doi:10.1002/adem.201801016
   Web of Science ®Google Scholar
• Etsion, I. (2004), “Improving Tribological Performance of Mechanical Components by Laser Surface Texturing,” Tribology Letters, 17(4), pp 733–737. doi:10.1007/s11249-004-8081-1
   Web of Science ®Google Scholar
• Mishra, S.P, and Polycarpou, A.A. (2011), “Tribological Studies of Unpolished Laser Surface Textures Under Starved Lubrication Conditions for Use in Air-Conditioning and Refrigeration Compressors,” Tribology International, 44(12), pp 1890–1901. doi:10.1016/j.triboint.2011.08.005
   Web of Science ®Google Scholar
• Vladescu, S.C., Olver, A.V., and Pegg, I.G. (2015), “The Effects of Surface Texture in Reciprocating Contacts—An experimental study,” Tribology International, 82, pp 28–42. doi:10.1016/j.triboint.2014.09.015
   Web of Science ®Google Scholar
• Bathe, R., Krishna. V.S., and Nikumb, S.K. (2014), “Laser Surface Texturing of Gray Cast Iron for Improving Tribological Behavior,” Applied Physics A, 117(1), pp 117–123. doi:10.1007/s00339-014-8281-y
   Web of Science ®Google Scholar
• Etsion, I., Kligerman, Y., and Halperin, G. (1999). “Analytical and Experimental Investigation of Laser-Textured Mechanical Seal Faces,” A S L E Transactions, 42(3), pp. 511– 516. doi:10.1080/10402009908982248
   Google Scholar
• Olofinjana, B., Lorenzo-Martin, C., Ajayi, O.O., and Ajayi, E.O. (2015), “Effect of Laser Surface Texturing (LST) on Tribochemical Films Dynamics and Friction and Wear Performance,” Wear, 332-333, pp 1225–1230. doi:10.1016/j.wear.2015.02.050
   Web of Science ®Google Scholar
• Sedlacek, M., Podgornik, B., Ramalho, A., and Cesnik, D. (2017), “Influence of Geometry and the Sequence of Surface Texturing Process on Tribological Properties,” Tribology International, 115, pp 268–273.
   Web of Science ®Google Scholar
• Bonse, J., Kirner, S.V., Griepentrog, M., Spaltmann, D., and Krüger, J. (2018), “Femtosecond Laser Texturing of Surfaces for Tribological Applications,” Materials, 11, p 801.
   PubMed Web of Science ®Google Scholar
• Kümmel, D., Hamann-Schroer, M., Hetzner, H., and Schneider, J. (2019), “Tribological Behavior of Nanosecond - Laser Surface Textured Ti6Al4V,” Wear, 422-423, pp 261–268.
   Web of Science ®Google Scholar
• Rodrigues, G.W., and Bittencourt, M.L. (2020), “Surface Virtual Texturing of the Journal Bearings of a Three-Cylinder Ethanol Engine,” Industrial Lubrication and Tribology, 72(9), pp 1059–1073.
   Web of Science ®Google Scholar
• Li, H., Zhou, H., Zhang, D.P., Zhang, P., and Zhou, T. (2022), “Influence of Varying Distribution Distance and Angle on Fatigue Wear Resistance of 40Cr Alloy Steel with Laser Bionic Texture,” Materials Chemistry and Physics, 277, p 125515.
   Web of Science ®Google Scholar
• Vrbka, M., Šamánek, O., Šperka, P., Návrat, T., Křupka, I., and Hartl, M. (2010), “Effect of Surface Texturing on Rolling Contact Fatigue Within Mixed Lubricated Non-Conformal Rolling/Sliding Contacts,” Tribology International, 43(8), pp 1457–1465.
   Web of Science ®Google Scholar
• Liu, J., Wang, L.F., and Shi, Z.F. (2022), “Dynamic Modelling of the Defect Extension and Appearance in a Cylindrical Roller Bearing,” Mechanical Systems and Signal Processing, 173, p 109040.
   Web of Science ®Google Scholar
• Sudeep, U., Pandey, R. K., and Tandon, N. (2013), “Effects of Surface Texturing on Friction and Vibration Behaviors of Sliding Lubricated Concentrated Point Contacts Under Linear Reciprocating Motion,” Tribology International, 62, pp 198–207.
   Web of Science ®Google Scholar
• Sudeep, U., Tandon, N., and Pandey, R.K. (2014), “Friction and Vibration Behaviors of Lubricated Laser Textured Point Contacts under Reciprocating Rolling Motion with Highlights on the Used Laser Parameters,” Procedia Technology, 14, pp 4–11.
   Google Scholar
• Sudeep, U., Tandon, N., and Pandey, R.K. (2016), “Comparisons of Tribological and Vibration Behaviors of Textured Point Contacts of Bearing Steel Lubricated with Oil and Grease Under Starved Conditions,” Journal of Tribology, 138(3), p 031504.
   Web of Science ®Google Scholar
• Sudeep, U., Tandon, N., and Pandey, R.K. (2016), “Vibration Studies of Lubricated Textured Point Contacts of Bearing Steels Due to Surface Topographies: Simulations and Experiments,” Tribology International, 102, pp 265–274.
   Web of Science ®Google Scholar
• Liu, S., Sai, Q., Wang, S., and Williams, J. (2022), “Effects of Laser Surface Texturing and Lubrication on the Vibrational and Tribological Performance of Sliding Contact,” Lubricants, 10(1), p 10.
   Web of Science ®Google Scholar
• Gupta, N., Tandon, N., Pandey, R.K., Vidyasagar, K.E.C., and Kalyanasundaram, D. (2020), “Tribological and Vibration Studies of Textured Spur Gear Pairs Under Fully Flooded and Starved Lubricating Conditions,” Tribology Transactions, 63(6), pp 1–12.
   Web of Science ®Google Scholar
• Hu, L.H., Mo, J.L., Wang, D.W., Yang, J.Z., Chen, G.X., and Zhu, M.H. (2016), “Groove-Textured and Pit-Textured Surfaces to Suppress Friction-Induced Squeal Noise,” China Mechanical Engineering, 27(09), pp 1158–1164.
   Google Scholar
• Fadi, A., Křupka, I., and Hartl, M. (2013), “Analytical and Experimental Investigation on Friction of Non-Conformal Point Contacts Under Starved Lubrication,” Meccanica, 48(3), pp 545–553.
   Web of Science ®Google Scholar
• Wu, C., Yang, K., Ni, J., Lu, S., Yao, L., and Li, X. (2022), “Investigations for Vibration and Friction Torque Behaviors of Thrust Ball Bearing with Self-Driven Textured Guiding Surface,” Friction, 6, pp 1–17. doi:10.1007/s40544-022-0627-4.
   Google Scholar
• Rosenkranz, A., Grützmacher, P.G., Gachot, C., and Costa, H.L. (2019), “Surface Texturing in Machine Elements-A Critical Discussion for Rolling and Sliding Contacts,” Advanced Engineering Materials, 21(8), p 1900194.
   Web of Science ®Google Scholar
• Grützmacher, P.G., Rosenkranz, A., Rammacher, S., Gachot, C., and Mücklich, F. (2017), “The Influence of Centrifugal Forces on Friction and Wear in Rotational Sliding,” Tribology International, 116, pp 256–263.
   Web of Science ®Google Scholar
• Gupta, N., Tandon, N., Pandey, R.K., Vidyasagar, K.E.C., and Kalyanasundaram, D. (2022), “Tribodynamic Studies of Textured Gearsets Lubricated with Fresh and MoS2 Blended Greases,” Tribology International, 165, p 107247.
   Web of Science ®Google Scholar
• Ming, A.B., Chu, F.L., and Zhang, W. (2013), “Compound Fault Features Separation of Rolling Element Bearing Based on the Wavelet Decomposition and Spectrum Auto-correlation,” Journal of Mechanical Engineering, 03, pp 80–87.
   Google Scholar
• Chen, G.X., Zhou, Z.R., Kapsa, P., and Vincent, L. (2003), “Experimental Investigation into Squeal Under Reciprocating Sliding,” Tribology International, 36(12), pp 961–971.
   Web of Science ®Google Scholar
• Mo, J.L., Wang, Z.G., Chen, G.X., Shao, T.M., Zhu, M.H., and Zhou, Z.R. (2013), “The Effect of Groove-Textured Surface on Friction and Wear and Friction-Induced Vibration and Noise,” Wear, 301(1–2), pp 671–681.
   Web of Science ®Google Scholar
• Liu, J., Xu, Y.J., and Pan, G. (2021), “A Combined Acoustic and Dynamic Model of a Defective Ball Bearing,” Journal of Sound and Vibration, 501, p 116029.
   Web of Science ®Google Scholar
• Patil, A.P., Mishra, B.K., and Harsha, S.P. (2020), “Vibration based modelling of acoustic emission of rolling element bearings,” Journal of Sound and Vibration, 468, p 115117.
   Web of Science ®Google Scholar
• Napadłek, W., Chrzanowski, W., and Leoniuk, P. (2017), “Fatigue Contact Durability of Laser Textured Rolling Bearings,” Inżynieria Materiałowa, 6(220), pp 272–278.
   Google Scholar