An Investigation Into the Synergistic Effect of CAPVD Cr/CrN Nanolayered Coating Deposition and Hard-Anodizing Methods on Fretting Fatigue Life of 7075-T6 Aluminum Alloy

References

• Shen, L. J., Lohrengel, A., and Schäfer, G. (2013), “Plain–Fretting Fatigue Competition and Prediction in Spline Shaft–Hub Connection,” International Journal of Fatigue, 52, pp 68–81. doi:10.1016/j.ijfatigue.2012.11.012
   Web of Science ®Google Scholar
• Chehrazi, A., Walbridge, S., Mohareb, S., Goldack, A., and Schlaich, M. (2020), “Probabilistic Fretting Fatigue Analysis of Bridge Stay Cables at Saddle Supports,” Structural Engineering International, 30(4), pp 571–579. doi:10.1080/10168664.2019.1661332
   Web of Science ®Google Scholar
• Zhao, L., He, X., Xing, B., Lu, Y., Gu, F., and Ball, A. (2015), “Influence of Sheet Thickness On Fatigue Behavior and Fretting of Self-Piercing Riveted Joints in Aluminum Alloy 5052,” Materials & Design, 87, pp 1010–1017. doi:10.1016/j.matdes.2015.08.121
   Web of Science ®Google Scholar
• Vantadori, S., Abbasi, F., Zanichelli, A., Leonetti, D., Pio Pucillo, G., and Hossein Majzoobi, G. (2022), “Influence of Normal Load Frequency on Fretting Fatigue Behaviour by a Critical Plane-Based Approach,” International Journal of Fatigue, 158, p 106724. doi:10.1016/j.ijfatigue.2022.106724
   Web of Science ®Google Scholar
• Almeida, G. M. J., Pessoa, G. C. V., Cardoso, R. A., Castro, F. C., and Araújo, J. A. (2020), “Investigation of Crack Initiation Path in AA7050-T7451 Under Fretting Conditions,” Tribology International, 144, p 106103. doi:10.1016/j.triboint.2019.106103
   Web of Science ®Google Scholar
• Majzoobi, G. H., Nemati, J., Novin Rooz, A. J., and Farrahi, G. H. (2009), “Modification of Fretting Fatigue Behavior of AL7075–T6 Alloy by the Application of Titanium Coating Using IBED Technique and Shot Peening,” Tribology International, 42(1), pp 121–129. doi:10.1016/j.triboint.2008.05.006
   Web of Science ®Google Scholar
• Majzoobi, G. H., and Ahmadkhani, A. R. (2010), “The effects of multiple re-shot peening on fretting fatigue behavior of Al7075-T6,” Surface and Coatings Technology 205(1), pp 102–109. doi:10.1016/j.surfcoat.2010.06.014
   Web of Science ®Google Scholar
• Mitterer, C. (2014), PVD and CVD Hard Coatings, pp 449–467. Elsevier: Oxford.
   Google Scholar
• Gilewicz, A., Chmielewska, P., Murzynski, D., Dobruchowska, E., and Warcholinski, B. (2016), “Corrosion Resistance of CrN and CrCN/CrN Coatings Deposited Using Cathodic Arc Evaporation in Ringer's and Hank's Solutions,” Surface and Coatings Technology, 299, pp 7–14. doi:10.1016/j.surfcoat.2016.04.069
   Web of Science ®Google Scholar
• Chang, Y.-Y., Wang, D.-Y., and Hung, C.-Y. (2005), “Structural and Mechanical Properties of nanolayered TiAlN/CrN Coatings Synthesized by a Cathodic Arc Deposition Process,” Surface and Coatings Technology, 200(5), pp 1702–1708. doi:10.1016/j.surfcoat.2005.08.088
   Web of Science ®Google Scholar
• Vengesa, Y., Fattah-alhosseini, A., Elmkhah, H., and Imantalab, O. (2022), “Influence of Post-Deposition Annealing Temperature on Morphological, Mechanical and Electrochemical Properties of CrN/CrAlN Multilayer Coating Deposited by Cathodic Arc Evaporation–Physical Vapor Deposition Process,” Surface and Coatings Technology, 432, p 128090. doi:10.1016/j.surfcoat.2022.128090
   Web of Science ®Google Scholar
• Mansoor, N. S., Fattah-Alhosseini, A., Elmkhah, H., and Shishehian, A. (2020), “Comparison of the Mechanical Properties and Electrochemical Behavior of TiN and CrN Single-Layer and CrN/TiN Multi-Layer Coatings Deposited by PVD Method on a Dental Alloy,” Materials Research Express, 6(12), p 126433. doi:10.1088/2053-1591/ab640d
   Google Scholar
• Anders, A. (2010), Unfiltered and Filtered Cathodic Arc Deposition, pp 466–531. William Andrew Publishing: Boston.
   Google Scholar
• Bull, S. J., and Jones, A. M. (1996), “Multilayer Coatings for Improved Performance,” Surface and Coatings Technology, 78(1), pp 173–184. doi:10.1016/0257-8972(94)02407-3
   Web of Science ®Google Scholar
• Borawski, B., Singh, J., and Todd, J. (2011), “Multi-Layer Coating Design Architecture for Optimum Particulate Erosion Resistance,” Wear, 271, pp 2782–2792. doi:10.1016/j.wear.2011.05.035
   Web of Science ®Google Scholar
• Anders, A. (2008), Cathodic Arcs: From Fractal Spots to Energetic Condensation. Springer: New York. ISBN 978–0387791074.
   Google Scholar
• Pogrebnjak, A., Beresnev, V. M., Bondar, O., Postolnyi, B., Załęski, K., Coy, E., Jurga, S., Lisovenko, M., Konarski, P., Rebouta, L., and Araujo, J. (2018), “Superhard CrN/MoN Coatings With Multilayer Architecture,” Materials & Design, 153. doi:10.1016/j.matdes.2018.05.001
   Web of Science ®Google Scholar
• Frank, F., Kainz, C., Tkadletz, M., Czettl, C., Pohler, M., and Schalk, N. (2022), “Microstructural and Micro-Mechanical Investigation of Cathodic Arc Evaporated ZrN/TiN Multilayer Coatings With Varying Bilayer Thickness,” Surface and Coatings Technology, 432, p 128070. doi:10.1016/j.surfcoat.2021.128070
   Web of Science ®Google Scholar
• Sui, X., Liu, J., Zhang, S., Yang, J., and Hao, J. (2018), “Microstructure, Mechanical and Tribological Characterization of CrN/DLC/Cr-DLC Multilayer Coating With Improved Adhesive Wear Resistance,” Applied Surface Science, 439, pp 24–32. doi:10.1016/j.apsusc.2017.12.266
   Web of Science ®Google Scholar
• Tritremmel, C., Daniel, R., Rudigier, H., Polcik, P., and Mitterer, C. (2014), “Mechanical and Tribological Properties of Al-Ti-N/Al-Cr-B-N Multilayer Films Synthesized by Cathodic Arc Evaporation,” Surface and Coatings Technology, 246, pp 57–63. doi:10.1016/j.surfcoat.2014.03.005
   Web of Science ®Google Scholar
• Ottone, C., Laurenti, M., Bejtka, K., Sanginario, A., and Valentina, C. (2014), “The Effects of the Film Thickness and Roughness in the Anodization Process of Very Thin Aluminum Films,” Journal of Materials Science & Nanotechnology, 1, p S107.
   Google Scholar
• Mattox, D. M. (2010), The “Good” Vacuum (Low Pressure) Processing Environment, 2nd ed., pp 73–145. William Andrew Publishing: Boston,
   Google Scholar
• Majzoobi, G. H., and Jaleh, M. (2007), “Duplex Surface Treatments on AL7075-T6 Alloy Against Fretting Fatigue Behavior by Application Of Titanium Coating Plus Nitriding,” Materials Science and Engineering: A, 452–453, pp 673–681. doi:10.1016/j.msea.2006.11.007
   Web of Science ®Google Scholar
• Liu, W., Xia, H., Liu, Y., Song, Z., and Xu, X. (2013), “The Performances of a Thermally Sprayed Fe/Ni Composite Coating to Resist Fretting Fatigue Under Rotational Bending Loads,” Surface and Coatings Technology, 217, pp 58–63. doi:10.1016/j.surfcoat.2012.11.072
   Web of Science ®Google Scholar
• Tang, C.-B., Liu, D.-X., Tang, B., Zhang, X.-H., Qin, L., and Liu, C.-S. (2016), “Influence of Plasma Molybdenizing and Shot-Peening on Fretting Damage Behavior of Titanium Alloy,” Applied Surface Science, 390, pp 946–958. doi:10.1016/j.apsusc.2016.08.146
   Web of Science ®Google Scholar
• Vidakis, N., Antoniadis, A., and Bilalis, N. (2003), “The VDI 3198 Indentation Test Evaluation of a Reliable Qualitative Control For Layered Compounds,” Journal of Materials Processing Technology, 143–144, pp 481–485. doi:10.1016/S0924-0136(03)00300-5
   Web of Science ®Google Scholar
• Jönsson, B., and Hogmark, S. (1984), “Hardness Measurements of Thin Films,” Thin Solid Films, 114(3), pp 257–269. doi:10.1016/0040-6090(84)90123-8
   Web of Science ®Google Scholar
• Jasempoor, F., Elmkhah, H., Imantalab, O., and Fattah-Alhosseini, A. (2022), “Improving the Mechanical, Tribological, and Electrochemical Behavior of AISI 304 Stainless Steel by Applying CrN Single Layer and Cr/CrN Multilayer Coatings,” Wear, 504–505, pp 204425. doi:10.1016/j.wear.2022.204425
   Web of Science ®Google Scholar
• Majzoobi, G. H., Azadikhah, K., and Nemati, J. (2009), “The Effects of Deep Rolling and Shot Peening on Fretting Fatigue Resistance of Aluminum-7075-T6,” Materials Science and Engineering: A, 516, 1, pp 235–247. doi:10.1016/j.msea.2009.03.020
   Web of Science ®Google Scholar
• Fang, J., Han, Q., Cui, H., Lei, X., Yan, X., Mu, Q., Xu, J., and Shi, H. (2023), “Fretting Fatigue Experiment and Polycrystal Plasticity Simulation in Ni-Based Superalloy at Room Temperature and 650 °C,” International Journal of Fatigue, 168, pp 107460. doi:10.1016/j.ijfatigue.2022.107460
   Web of Science ®Google Scholar
• Abbasi, F., Majzoobi, G., and Mendiguren, J. (2020), “A Review of the Effects of Cyclic Contact Loading on Fretting Fatigue Behavior,” Advances in Mechanical Engineering, 12(9), p 1687814020957175. doi:10.1177/1687814020957175
   Web of Science ®Google Scholar
• Vingsbo, O., and Söderberg, S. (1988), “On Fretting Maps,” Wear, 126(2), pp 131–147. doi:10.1016/0043-1648(88)90134-2
   Web of Science ®Google Scholar
• Nishioka, K., and Hirakawa, K. (1969), “Fundamental Investigations of Fretting Fatigue: Part 2, Fretting Fatigue Testing Machine and Some Test Results,” Bulletin of JSME, 12(50), pp 180–187. doi:10.1299/jsme1958.12.180
   Google Scholar
• Chun, S.-Y., Lee, S.-J., Lee, C.-H., and Chayahara, A. (2005), Nanometer-Ranged Metallic Coatings by Noble Pulsed Cathodic Arc Deposition, pp 83–86. Elsevier Science Ltd: Oxford.
   Google Scholar