Study on Friction Characteristics of ADC12-POM Gear Pair

Reference

• Tsai, C. Y. (2019), “Gear Module Adjustment Method for Shrinkage Compensation of Injection Molded Plastic Gears Using Single Dedicated Hob,” Mechanism and Machine Theory, 140, pp 233–244. doi:10.1016/j.mechmachtheory.2019.05.026
   Web of Science ®Google Scholar
• Shen, Y., Xin, D., Zhao, K., Lu, Z., and Cao, W. (2019), “Mechanism Analysis and Solution of Plastic Gear Waist Shrinkage,” Die & Mould Industry, 45(2), pp 11–15.
   Google Scholar
• Hirani, H., Jangra, D., and Sidh, K. N. (2023), “Experimental Investigation on the Wear Performance of Nano-Additives on Degraded Gear Lubricant,” Lubricants, 11(2), p 51. doi:10.3390/lubricants11020051
   Web of Science ®Google Scholar
• Mao, K., Greenwood, D., Ramakrishnan, R., Goodship, V., Shrouti, C., Chetwynd, D., and Langlois, P. (2019), “The Wear Resistance Improvement of Fibre Reinforced Polymer Composite Gears,” Wear, 426, pp 1033–1039.
   Web of Science ®Google Scholar
• Roda-Casanova, V., and Gonzalez-Perez, I. (2021), “Investigation of the Effect of Contact Pattern Design on the Mechanical and Thermal Behaviors of Plastic: Teel Helical Gear Drives,” Mechanism and Machine Theory, 164(1), p 104401. doi:10.1016/j.mechmachtheory.2021.104401
   Google Scholar
• Landi, L., Stecconi, A., Morettini, G., and Cianetti, F. (2021), “Analytical Procedure for the Optimization of Plastic Gear Tooth Root,” Mechanism and Machine Theory, 166(8), p 104496. doi:10.1016/j.mechmachtheory.2021.104496
   Google Scholar
• Singh, P. K., Siddhartha P., Singh, A. K. (2017), “An Investigation on the Effects of the Various Techniques Over the Performance and Durability of Polymer Gears,” Materials Today: Proceedings, 4(3), pp 1606–1614. doi:10.1016/j.matpr.2017.01.184
   Google Scholar
• Kim, C. H. (2006), “Durability Improvement Method for Plastic Spur Gears,” Tribology International, 39(11), pp 1454–1461. doi:10.1016/j.triboint.2006.01.020
   Web of Science ®Google Scholar
• Düzcükoğlu, H. (2009), “Study on Development of Polyamide Gears for Improvement of Load-Carrying Capacity,” Tribology International, 42(8), pp 1146–1153. doi:10.1016/j.triboint.2009.03.009
   Web of Science ®Google Scholar
• Koide, T., Yukawa, T., Takami, S., Ueda, A., Moriwaki, I., Tamura, A., and Hongu, J. (2017), “Tooth Surface Temperature and Power Transmission Efficiency of Plastic Sine-Curve Gear,” Journal of Advanced Mechanical Design, Systems, and Manufacturing, 11(6), p JAMDSM0082. doi:10.1299/jamdsm.2017jamdsm0082
   Web of Science ®Google Scholar
• Duhovnik, J., Zorko, D., and Sedej, L. (2016), “The Effect of the Teeth Profile Shape on Polymer Gear Pair Properties,” Tehnički vjesnik, 3(1), pp 199–207.
   Google Scholar
• Chen, Y., and Lin, Y. (2021), “A Calculation Method for Friction Coefficient and Engagement Efficiency of Plastic Line Gear Pair Under Dry Friction Conditions,” Friction, 9(6), pp 1420–1435. doi:10.1007/s40544-020-0424-x
   Web of Science ®Google Scholar
• Kumar, P., Hirani, H., and Agrawal, A. (2017). “Fatigue Failure Prediction in Spur Gear Pair Using AGMA Approach.” Materials Today: Proceedings, 4(2), pp 2470–2477. doi:10.1016/j.matpr.2017.02.099
   Google Scholar
• Bae, S. M., Seo, K. J., and Kim, D. E. (2020), “Effect of Friction on the Contact Stress of a Coated Polymer Gear,” Friction, 8, pp 1169–1177. doi:10.1007/s40544-020-0363-6
   Web of Science ®Google Scholar
• Kumar, P., Hirani, H., and Agrawal, A. K. (2019), “Modeling and Simulation of Mild Wear of Spur Gear Considering Radial Misalignment,” Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, 43, pp 107–116. doi:10.1007/s40997-018-0143-3
   Web of Science ®Google Scholar
• Jones, R., Mao, K., Phang, A., and Allen, B. (2011), “Effects of Linear and Angular Misalignment on a Spur Gear Pair,” Insight-Non-Destructive Testing and Condition Monitoring, 53(8), pp 420–425. doi:10.1784/insi.2011.53.8.420
   Google Scholar
• Saxena, A., Parey, A., and Chouksey, M. (2015), Effect of Shaft Misalignment and Friction Force on Time Varying Mesh Stiffness of Spur Gear Pair,” Engineering Failure Analysis, 49, pp 79–0191. doi:10.1016/j.engfailanal.2014.12.020
   Web of Science ®Google Scholar
• Miler, D., Hoić, M., Domitran, Z., and Eelj, J. (2019), “Prediction of Friction Coefficient in Dry-Lubricated Polyoxymethylene Spur Gear Pairs,” Mechanism and Machine Theory, 138, pp 205–222. doi:10.1016/j.mechmachtheory.2019.03.040
   Web of Science ®Google Scholar
• Kleemola, J., and Lehtovaara, A. (2007), “Experimental Evaluation of Friction Between Contacting Discs for the Simulation of Gear Contact,” Tribotest, 13, pp 13–20. doi:10.1002/tt.29
   Google Scholar
• Ghelloudj, O., Zelmati, D., and Amirat, A. (2017), “Engineering Modeling of Wear Profiles in Tooth Flank of Polyamide Spur Gears,” The International Journal of Advanced Manufacturing Technology, 93(10), pp 3531–3540. doi:10.1007/s00170-017-0779-y
   Google Scholar
• Zorko, J. (2019), “Durability and Design Parameters of a Steel/PEEK Gear Pair,” Mechanism and Machine Theory: Dynamics of Machine Systems Gears and Power Trandmissions Robots and Manipulator Systems Computer-Aided Design Methods, 140, pp 825–846. doi:10.1016/j.mechmachtheory.2019.07.001
   Google Scholar
• Mohammed, A. S., and Fareed, M. I. (2016), “Improving the Friction and Wear of Poly-Ether-Etherketone (PEEK) by Using Thin Nano-Composite Coatings,” Wear, 364, pp 154–162. doi:10.1016/j.wear.2016.07.012
   Web of Science ®Google Scholar
• Rodriguez, V., Sukumaran, J., Schlarb, A. K., and De Baets, P. (2016), “Reciprocating Sliding Wear Behaviour of PEEK-Based Hybrid Composites,” Wear, 362, pp 161–169. doi:10.1016/j.wear.2016.05.024
   Web of Science ®Google Scholar
• Hribersek, M., Erjavec, M., Hlebanja, G., and Kulovec, S. (2021), “Durability Testing and Characterization of POM Gears,” Engineering Failure Analysis, 124(229), p 105377. doi:10.1016/j.engfailanal.2021.105377
   Google Scholar
• Mao, K. (2007), “A New Approach for Polymer Composite Gear Design,” Wear, 262(3), pp 432–441.
   Web of Science ®Google Scholar
• Kalin, M., and Kupec, A. (2017), “The Dominant Effect of Temperature on the Fatigue Behaviour of Polymer Gears,” Wear, 376, pp 1339–1346. doi:10.1016/j.wear.2017.02.003
   Web of Science ®Google Scholar
• Yao, J. C., Chen, Y. B., Zhou, J., et al. (2001), “Research on the Method of Calculating the Engagement Efficiency of Gear Transmission,” Journal of Mechanical Engineering, 37(11), p 5.
   Google Scholar