References
- Wilkes, J. C., and Childs, D. W. (2012), “Tilting Pad Journal Bearings—A Discussion on Stability Calculation, Frequency Dependence, and Pad and Pivot,” Journal of Engineering for Gas Turbines and Power, 134, 12, p 122508.
- Wilkes, J. C., and Childs, D. W. (2013), “Improving Tilting-Pad Journal Bearing Predictions—Part II: Comparison of Measured and Predicted Rotor-Pad Transfer Functions for a Rocker-Pivot Tilting-Pad Journal Bearing,” Journal of Engineering for Gas Turbines and Power, 135, 1, p 012503.
- Bizarre, L., Andersen, T. B., Daniel, G. B., Santos, I. F., and Cavalca, K. L. (2020), “A 3D Approach for THD Lubrication in Tilting Pad Journal Bearing—Theory and Experiment,” Tribology Transactions, 63, 1, pp 120–132.
- Hagemann, T., Zeh, C., and Schwarze, H. (2019), “Heat Convection Coefficients of a Tilting-Pad Journal Bearing with Directed Lubrication,” Tribology International, 136, pp 114–126.
- Hagemann, T., Zemella, P., Pfau, B., and Schwarze, H. (2020), “Experimental and Theoretical Investigations on Transition of Lubrication Conditions for a Five-Pad Tilting-Pad Journal Bearing with Eccentric Pivot Up to Highest Surface Speeds,” Tribology International, 142, p 106008.
- Hojjati, M., Farzanmehr, S. Y., Navaz, H. M., and Haddadpour, H. (2022), “Prediction of Nonlinear Dynamic Coefficients of Tilting-Pad Journal Bearings with Pad Perturbation,” Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 236(7), pp 1273–1295.
- Soltani, A., and Naderan, H. (2021), “A Full 3D Computational Model for Tilting-Pad Journal Bearings and Comparing It to 2D Models,” Tribology International, 164, p 107223.
- Suh, J., and Palazzolo, A. (2015), “Three-Dimensional Dynamic Model of TEHD Tilting-Pad Journal Bearing—Part I: Theoretical Modeling,” Journal of Tribology, 137(4), p 041703.
- Suh, J., and Palazzolo, A. (2015), “Three-Dimensional Dynamic Model of TEHD Tilting-Pad Journal Bearing—Part II: Parametric Studies,” Journal of Tribology, 137(4), p 041704.
- Kim, S., and Palazzolo, A. B. (2019), “Pad–Pivot Friction Effect on Nonlinear Response of a Rotor Supported by Tilting-Pad Journal Bearings,” Journal of Tribology, 141(9), p 091701.
- da Silva, H. A. P., and Nicoletti, R. (2018), “Design of Tilting-Pad Journal Bearings Considering Bearing Clearance Uncertainty and Reliability Analysis,” Journal of Tribology, 141(1), p 011703.
- Suh, J., and Choi, Y.-S. (2016), “Pivot Design and Angular Misalignment Effects on Tilting Pad Journal Bearing Characteristics: Four Pads for Load on Pad Configuration,” Tribology International, 102, pp 580–599.
- Mehdi, S. M., Jang, K. E., and Kim, T. H. (2018), “Effects of Pivot Design on Performance of Tilting Pad Journal Bearings,” Tribology International, 119, pp 175–189.
- Dixit, H. K., and Gupta, T. C. (2021), “Effect of Geometrical Parameters on Fluid Film Coefficients in Tilting Pad Journal Bearing,” Journal of Computational & Applied Research in Mechanical Engineering (JCARME), 10(2), pp 405–427.
- Jin, Y., Chen, F., Xu, J., and Yuan, X. (2020), “Nonlinear Dynamic Analysis of Low Viscosity Fluid-Lubricated Tilting-Pad Journal Bearing for Different Design Parameters,” Friction, 8(5), pp 930–944.
- Cui, S., Zhang, C., Fillon, M., and Gu, L. (2020), “Optimization Performance of Plain Journal Bearings with Partial Wall Slip,” Tribology International, 145, p 106137.
- Luo, Z., and Schwarz, C. (2019), “Improvement of Rotordynamic Performance of Integrally Geared Centrifugal Compressors Through a Systematic Design Modification Approach,” Proc. ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, V07AT33A013.
- Yang, B.-S., Lee, Y.-H., Choi, B.-K., and Kim, H.-J. (2001), “Optimum Design of Short Journal Bearings by Artificial Life Algorithm,” Tribology International, 34(7), pp 427–435.
- Zhang, J., Lu, L., Zheng, Z., Tong, H., and Huang, X. (2023), “Experimental Verification: A Multi-Objective Optimization Method for Inversion Technology of Hydrodynamic Journal Bearings,” Structural and Multidisciplinary Optimization, 66(1), p 14.
- Saruhan, H., Rouch, K. E., and Roso, C. A. (2004), “Design Optimization of Tilting-Pad Journal Bearing Using a Genetic Algorithm,” International Journal of Rotating Machinery, 10(4), pp 301–307.
- Chan, C.-W. (2015), “Modified Particle Swarm Optimization Algorithm for Multi-Objective Optimization Design of Hybrid Journal Bearings,” Journal of Tribology, 137(2), p 021101.
- Xiang, G., Han, Y., Wang, J., Wang, J., and Ni, X. (2019), “Coupling Transient Mixed Lubrication and Wear for Journal Bearing Modeling,” Tribology International, 138, pp 1–15.
- Greenwood, J. A., and Tripp, J. H. (1970), “The Contact of Two Nominally Flat Rough Surfaces,” Proceedings of the Institution of Mechanical Engineers, 185(1), pp 625–633.
- Bukovnik, S., Offner, G., Čaika, V., Priebsch, H. H., and Bartz, W. J. (2007), “Thermo-Elasto-Hydrodynamic Lubrication Model for Journal Bearing Including Shear Rate-Dependent Viscosity,” Lubrication Science, 19(4), pp 231–245.
- Roelands, C. J. A., Winer, W. O., and Wright, W. A. (1971), “Correlational Aspects of the Viscosity-Temperature-Pressure Relationship of Lubricating Oils(Dr In dissertation at Technical University of Delft, 1966),” Journal of Lubrication Technology 93(1), pp 209–210.
- Yan, K., Li, H., Ding, N., Jiang, D., and Meng, X. (2022), “Transient-Mixed Lubrication Model Numerically for Friction and Wear of Journal Bearings Under Heavy Load During Start-Up,” Industrial Lubrication and Tribology 74(10), pp 1174–1185.
- Patir, N., and Cheng, H. S. (1978), “An Average Flow Model for Determining Effects of Three-Dimensional Roughness on Partial Hydrodynamic Lubrication,” Journal of Lubrication Technology, 100(1), pp 12–17.
- Wang, Y., Wang, Q. J., Lin, C., and Shi, F. (2006), “Development of a Set of Stribeck Curves for Conformal Contacts of Rough Surfaces,” Tribology Transactions, 49(4), pp 526–535.
- Jonatha, O., Rodrigues, G. W., and Bittencourt, M. L. (2019), “Virtual Texturing of Lightweight Engine Crankshaft Bearings,” Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41(6), p 242.
- Archard, J. F. (1980), “Wear Theory and Mechanisms,” In Wear Control Handbook, ed. M. B. Peterson and W. O. Winer, pp 161–178. ASME: New York.