Investigation on Microstructure and Fretting Wear Properties of GCr15 Bearing Steel Modified by Fine Particle Bombardment

References

• Liu, X. C., et al. (2022), "The Effect of the Displacement Amplitude on the Fretting Wear of GCr15 Steel with a TiC Coating," Materials, 15(19), pp 6628–6628. doi:10.3390/MA15196628.
   PubMed Web of Science ®Google Scholar
• Teng, Z. J., et al. (2019), "Fretting Behaviors of a Steel up to Very High Cycle Fatigue," Wear, 438–439(C), pp 203078–203078. doi:10.1016/j.wear.2019.203078.
   Google Scholar
• Teng, Z. J., et al. (2021), "Effect of Mean Stress in Very High Cycle Fretting Fatigue of a Bearing Steel," International Journal of Fatigue, pp 106262–. doi:10.1016/J.IJFATIGUE.2021.106262.
   Google Scholar
• Guo, X. L., et al. (2019), "Study on Fretting Wear Properties of High-Speed Diesel Engine Roller Tappet Material Cr12W Steel," IOP Conference Series: Materials Science and Engineering, 569(2). doi:10.1088/1757-899X/569/2/022022.
   Google Scholar
• Shi, Z. K., et al. (2023), "Effects of Frequency on the Fretting Wear Behavior of Aluminum Bronze Coatings," Surface & Coatings Technology, 457. doi:10.1016/J.SURFCOAT.2023.129306.
   Web of Science ®Google Scholar
• Zhang, S. Z., et al. (2022), "Effect of the Third Body Layer Formed at Different Temperature on Fretting Wear Behavior of 316 Stainless Steel in the Composite Fretting Motion of Slip and Impact," Wear, 492–493. doi:10.1016/J.WEAR.2021.204220.
   Web of Science ®Google Scholar
• Park, C. K., et al. (2019), "Influence of High-Power Diode Laser Heat Treatment on Wear Resistance of a Mold Steel," Journal of Mechanical Science and Technology, 33(2), pp 829–836. doi:10.1007/s12206-019-0139-y.
   Web of Science ®Google Scholar
• Liu, H. B., et al. (2019), "Surface Layer Microstructures and Wear Properties Modifications of Mg-8Gd-3Y Alloy Treated by Shot Peening," Materials Characterization, 158(C), pp 109952–109952. doi:10.1016/j.matchar.2019.109952.
   Google Scholar
• Liu, S. F., et al. (2022), "High Wear Resistance WC-Co Reinforced GCr15 Bearing Steel Composite Prepared Via Selective Laser Melting (SLM)," International Journal of Refractory Metals and Hard Materials, 109. doi:10.1016/J.IJRMHM.2022.105988.
   Web of Science ®Google Scholar
• Tan, C. C., et al. (2022), "Insights Into the Microstructure Characteristics, Mechanical Properties and Tribological Behaviour of Gas-Phase Chromized Coating on GCr15 Bearing Steel," Surface & Coatings Technology, 443. doi:10.1016/J.SURFCOAT.2022.128605.
   Web of Science ®Google Scholar
• Bozkurt, Y. B., et al. (2022), "Tribocorrosion Properties and Mechanism of a Shot Peened AISI 4140 Low-Alloy Steel," Surface & Coatings Technology, 440. doi:10.1016/J.SURFCOAT.2022.128444.
   PubMed Web of Science ®Google Scholar
• Qiao, J. Z., et al. (2022), "Effect of Shot Peen Forming on Corrosion-Resistant of 2024 Aluminum Alloy in Salt Spray Environment," Materials, 15(23), pp 8583–8583. doi:10.3390/MA15238583.
   PubMed Web of Science ®Google Scholar
• Silva, K. H. S., et al. (2019), "Influence of Shot Peening on Residual Stresses and Tribological Behavior of Cast and Austempered Ductile Iron," Wear, 440–441(C), pp 203099–203099. doi:10.1016/j.wear.2019.203099.
   Google Scholar
• Ramos, R., et al. (2016), "Improvement in Fatigue Life of Al 7475-T7351 Alloy Specimens by Applying Ultrasonic and Micro Shot Peening," International Journal of Fatigue, 92, pp 87–95. doi:10.1016/j.ijfatigue.2016.06.022.
   Web of Science ®Google Scholar
• Zeng, D. F., et al. (2017), "Scuffing Behavior of Al-Si Alloy Modified by Fine Particle Bombarding and Powder Impact Plating Hybrid Surface Treatment," Tribology Transactions, 60(6), pp 1099–1109. doi:10.1080/10402004.2016.1261314.
   Web of Science ®Google Scholar
• Li, X., et al. (2019), "Effect of Micro-Shot Peening, Conventional Shot Peening and Their Combination on Fatigue Property of EA4T Axle Steel," Journal of Materials Processing Tech., 275, p 116320. doi:10.1016/j.jmatprotec.2019.116320.
   Web of Science ®Google Scholar
• Morita, T., et al. (2013), "Influence of Hardness of Substrates on Properties of Surface Layer Formed by Fine Particle Bombarding," Materials Science & Engineering A, 574, pp 197–204. doi:10.1016/j.msea.2013.03.026.
   Web of Science ®Google Scholar
• Azar, V., et al. (2010), "The Effect of Shot Peening on Fatigue and Corrosion Behavior of 316L Stainless Steel in Ringer's Solution," Surface & Coatings Technology, 204(21), pp 3546–3551. doi:10.1016/j.surfcoat.2010.04.015.
   Web of Science ®Google Scholar
• Chung, Y. H., et al. "Effect of Micro-Shot Peening on the Fatigue Performance of AISI 304 Stainless Steel," Metals, 11(9), p 1408. 10.3390/met11091408
   Web of Science ®Google Scholar
• Zhan M. Y., et al. (2018), "Loosening Evaluation of Bolted Joints Modified by Fine Particle Bombardment Under Transverse Cyclic Loading," Tribology Transactions, 61(6), pp 1003–1012. doi:10.1080/10402004.2018.1460698.
   Web of Science ®Google Scholar
• Zeng, D. F., et al. (2017), "Investigation on the Scuffing Resistance of Ductile Cast Iron as Affected by Fine Particle Bombardment to Produce Surface Hardened Layer and Micro-Dimpled Surface," Wear, 378–379, pp 174–182. doi:10.1016/j.wear.2017.02.046.
   Web of Science ®Google Scholar
• Xu, H. Y., et al. (2020), "Experimental Study of GCr15 Steel in Ultrasonic Rolling Process," Australian Journal of Mechanical Engineering, 20(2), pp 1–10. doi:10.1080/14484846.2020.1714350.
   Web of Science ®Google Scholar
• Amanov, A., and Umarov, R. (2018), "The Effects of Ultrasonic Nanocrystal Surface Modification Temperature on the Mechanical Properties and Fretting Wear Resistance of Inconel 690 Alloy," Applied Surface Science, 441, pp 515–529. doi:10.1016/j.apsusc.2018.01.293.
   Web of Science ®Google Scholar
• Zhen, W., et al. (2020), "Investigation of Microstructural Evolution in a Selective Laser Melted Ti6Al4V Alloy Induced by an Ultrasonic Surface Rolling Process," Materials Science & Engineering A, 772(C), pp 138696–138696. doi:10.1016/j.msea.2019.138696.
   Google Scholar
• Zhao, G. H., et al. (2023), "Wear Behavior of Copper Containing Antibacterial Stainless Steel in Different Environmental Media and EBSD Analysis of Its Subsurface Structure," Materials Characterization, 197. doi:10.1016/J.MATCHAR.2023.112690.
   Web of Science ®Google Scholar
• Zhang, H., et al. (2022), "Microstructural Evolution, Mechanical Behaviors and Strengthening Mechanism of 300 M Steel Subjected to Multi-Pass Laser Shock Peening," Optics and Laser Technology, 148. doi:10.1016/J.OPTLASTEC.2021.107726.
   Web of Science ®Google Scholar
• Bahl, S., et al. (2017), "Elucidating Microstructural Evolution and Strengthening Mechanisms in Nanocrystalline Surface Induced by Surface Mechanical Attrition Treatment of Stainless Steel," Acta Materialia, 122, pp 138–151. doi:10.1016/j.actamat.2016.09.041.
   Web of Science ®Google Scholar
• Aleksander, Ś., Mirosław, S., and Mariusz, W. (2022), "Effects of Shot Peening and Cavitation Peening on Properties of Surface Layer of Metallic Materials—A Short Review," Materials, 15(7), pp 2476–2476. doi:10.3390/MA15072476.
   PubMed Web of Science ®Google Scholar
• Kobayashi, M., et al. (1998), "Mechanism of Creation of Compressive Residual Stress by Shot Peening," International Journal of Fatigue, 20(5), pp 351–357. doi:10.1016/S0142-1123(98)00002-4.
   Web of Science ®Google Scholar
• Yang, Q., et al. (2022), "Investigation of Wet Shot Peening on Microstructural Evolution and Tensile-Tensile Fatigue Properties of Ti-6Al-4V Alloy," Materials Chemistry and Physics, 291. doi:10.1016/J.MATCHEMPHYS.2022.126635.
   Web of Science ®Google Scholar
• Bao, L., et al. (2022), "Surface Characteristics and Stress Corrosion Behavior of AA 7075-T6 Aluminum Alloys After Different Shot Peening Processes," Surface & Coatings Technology, 440. doi:10.1016/J.SURFCOAT.2022.128481.
   PubMed Web of Science ®Google Scholar
• Baydoun, S., et al. (2019), "Fretting Wear Rate Evolution of a Flat-on-Flat Low Alloyed Steel Contact: A Weighted Friction Energy Formulation," Wear, 426–427(Pt A), pp 676–693. doi:10.1016/j.wear.2018.12.022.
   Google Scholar
• Zhang, Y. L., et al. (2020), "Effect of Shot Peening on Residual Stress Distribution and Tribological Behaviors of 17Cr2Ni2MoVNb Steel," Surface and Coatings Technology, 386, pp 125497–125497. doi:10.1016/j.surfcoat.2020.125497.
   Web of Science ®Google Scholar
• Zheng, J. F., et al. (2009), "Fretting Wear Behaviors of a Railway Axle Steel," Tribology International, 43(5), pp 906–911. doi:10.1016/j.triboint.2009.12.031.
   Web of Science ®Google Scholar
• Esteves, M., et al. (2017), "Electrical Performance of Textured Stainless Steel Under Fretting," Tribology International, 110, pp 41–51. doi:10.1016/j.triboint.2017.02.009.
   Web of Science ®Google Scholar
• Huq, M. Z., and Celis, J.-P. (2002), "Expressing Wear Rate in Sliding Contacts Based on Dissipated Energy," Wear, 252(5), pp 375–383. doi:10.1016/S0043-1648(01)00867-5.
   Web of Science ®Google Scholar
• Tekdir, H., and Yetim, A. F. (2020), "Additive Manufacturing of Multiple Layered Materials (Ti6Al4V/316L) and Improving Their Tribological Properties With Glow Discharge Surface Modification," Vacuum, pp 109893–. doi:10.1016/j.vacuum.2020.109893.
   Web of Science ®Google Scholar
• Yetim, A. F., et al. (2023), "Tribological Behavior of Plasma-Sprayed Yttria-Stabilized Zirconia Thermal Barrier Coatings on 316L Stainless Steel Under High-Temperature Conditions," Materials Letters, 336. doi:10.1016/J.MATLET.2023.133873.
   Web of Science ®Google Scholar
• Zhang, Q. Y., et al. (2013), "Characteristics of Oxidative Wear and Oxidative Mildwear," Tribology International. doi:10.1016/J.TRIBOIN.2013.01.003. 10.1016/j.triboint.2013.01.003
   PubMed Web of Science ®Google Scholar
• Yetim, A. F., et al. (2021), "Influences of Ti, Al and V Metal Doping on the Structural, Mechanical and Tribological Properties of DLC Films," Diamond & Related Materials, 120. doi:10.1016/J.DIAMOND.2021.108639.
   Web of Science ®Google Scholar