Experimental Study on High-Speed Aviation Gear Scuffing Based on Tooth Profile and Surface Treatment Improvements

References

• Li, S. and Kahraman, A. (2021), “A Scuffing Model for Spur Gear Contacts,” Mechanism and Machine Theory, 156, 104161. doi:10.1016/j.mechmachtheory.2020.104161
   Web of Science ®Google Scholar
• Ludema, K. C. (1984), “A Review of Scuffing and Running-In of Lubricated Surfaces, with Asperities and Oxides in Perspective,” Wear, 100, pp 315–331. doi:10.1016/0043-1648(84)90019-X
   Web of Science ®Google Scholar
• Li, S., Kahraman, A., Anderson, N., and Wedeven, L. D. (2013), “A Model to Predict Scuffing Failures of a Ball-on-Disk Contact,” Tribology International, 60, pp 233–245. doi:10.1016/j.triboint.2012.11.007
   Web of Science ®Google Scholar
• Martins, R., Amaro, R., and Seabra, J. (2008), “Influence of Low Friction Coatings on the Scuffing Load Capacity and Efficiency of Gears,” Tribology International, 41, pp 234–243. doi:10.1016/j.triboint.2007.05.008
   Web of Science ®Google Scholar
• Höhn, B. R., Michaelis, K., Eberspächer, C., and Schlenk, L. (1999), “A Scuffing Load Capacity Test with the FZG Gear Test Rig for Gear Lubricants with High EP Performance,” Tribotest, 5, pp 383–390. doi:10.1002/tt.3020050405
   Google Scholar
• ASTM D1947 (1993), Standard Test Method for Load-Carrying Capacity of Petroleum Oil and Synthetic Fluid Gear Lubricants, ASTM International: West Conshohocken, PA.
   Google Scholar
• Winter, H. and Michaelis, K. (1986), “Scoring Tests of Aircraft Transmission Lubricants at High Speeds and High Temperatures,” Journal of Synthetic Lubrication, 3, pp 121–135. doi:10.1002/jsl.3000030205
   Google Scholar
• Michaelis, K., Hoehn, B.-R., and Oster, P. (2004), “Influence of Lubricant on Gear Failures Test Methods and Application to Gearboxes in Practice,” Tribotest, 11, pp 43–56. doi:10.1002/tt.3020110105
   Google Scholar
• Ajayi, O. O., Lorenzo-Martin, C., Erck, R. A., and Fenske, G. R. (2011), “Scuffing Mechanism of Near-Surface Material during Lubricated Severe Sliding Contact,” Wear, 271, pp 1750–1753. doi:10.1016/j.wear.2010.12.086
   Web of Science ®Google Scholar
• Weber, C., Tobie, T., and Stahl, K. (2017), “Investigation on the Flank Surface Durability of Gears with Increased Pressure Angle,” Forschung im Ingenieurwesen, 81, pp 207–213.
   Web of Science ®Google Scholar
• Terauchi, Y. and Nadano, H. (1982), “Effect of Tooth Profile Modification on the Scoring Resistance of Spur Gears,” Wear, 80, pp 27–41. doi:10.1016/0043-1648(82)90085-0
   Web of Science ®Google Scholar
• Zhou, C., Xing, M., Wang, H., and Hu, B. (2021), “A Novel Thermal Network Model for Predicting the Contact Temperature of Spur Gears,” International Journal of Thermal Sciences, 161, 106703. doi:10.1016/j.ijthermalsci.2020.106703
   Web of Science ®Google Scholar
• Imrek, H. and Unuvar, A. (2009), “Investigation of the Influence of Load and Velocity on the Scoring of Addendum Modified Gear Tooth Profiles,” Mechanism and Machine Theory, 44, pp 938–948. doi:10.1016/j.mechmachtheory.2008.06.002
   Web of Science ®Google Scholar
• Kim, J. W. and Lee, Y. Z. (2001), “The Residual Stresses on Lubricated Sliding Surfaces during Break-In and up to Scuffing,” Wear, 251, pp 985–989. doi:10.1016/S0043-1648(01)00701-3
   Web of Science ®Google Scholar
• Drozdov, Y. N. and Gavrikov, Y. A. (1968), “Friction and Scoring under the Conditions of Simultaneous Rolling and Sliding of Bodies,” Wear, 11, pp 291–302. doi:10.1016/0043-1648(68)90177-4
   Web of Science ®Google Scholar
• Yamamoto, Y. and Hirano, F. (1980), “Relation between Scuffing Resistance and the Increase in Surface Hardness during Tests under Conditions of Rolling/Sliding,” Wear, 63, pp 165–173. doi:10.1016/0043-1648(80)90084-8
   Web of Science ®Google Scholar
• Wojciechowski, L., Kubiak, K. J., and Mathia, T. G. (2016), “Roughness and Wettability of Surfaces in Boundary Lubricated Scuffing Wear,” Tribology International, 93, pp 593–601. doi:10.1016/j.triboint.2015.04.013
   Web of Science ®Google Scholar
• Chen, T., Wei, P., Zhu, C., Zeng, P., Li, D., Robert, G. P., and Liu, H. (2023), “Experimental Investigation of Gear Scuffing for Various Tooth Surface Treatments,” Tribology Transactions, 66, pp 35–46. doi:10.1080/10402004.2022.2136590
   Web of Science ®Google Scholar
• Winkelmann, L. W., Michaud, M. D., Snidle, R. W., and Alanou, M. P. (2003), “Effect of Superfinishing on Scuffing Resistance,” Proceedings of ASME 2003 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, September 2–6, Chicago, IL. doi:10.1115/DETC2003/PTG-48124
   Google Scholar
• Wang, X., Wang, D., Lu, P., Ma, C., Dou, X., and Zhang, Y. (2020), “Study on the Anti Scuffing Performance of Gear based on Tooth Flank Phosphate,” Mechanical Transmission, 44, pp 134–138.
   Google Scholar
• Riggs, M. R., Murthy, N. K., and Berkebile, S. P. (2017), “Scuffing Resistance and Starved Lubrication Behavior in Helicopter Gear Contacts: Dependence on Material, Surface Finish, and Novel Lubricants,” Tribology Transactions, 60, pp 932–941. doi:10.1080/10402004.2016.1231358
   Web of Science ®Google Scholar
• Zhang, X., Wei, P., Robert, G. P., Liu, G., Liu, H., and Wu, S. (2022), “Study on the Relation between Surface Integrity and Contact Fatigue of Carburized Gears,” International Journal of Fatigue, 165, 107203. doi:10.1016/j.ijfatigue.2022.107203
   Web of Science ®Google Scholar
• Wu, J., Liu, H., Wei, P., Zhu, C., and Lin, Q. (2020), “Effect of Shot Peening Coverage on Hardness, Residual Stress and Surface Morphology of Carburized Rollers,” Surface and Coatings Technology, 384, 125273. doi:10.1016/j.surfcoat.2019.125273
   Web of Science ®Google Scholar
• Zhang, J., Li, W., Wang, H., Song, Q., Lu, L., Wang, W., and Liu, Z. (2016), “A Comparison of the Effects of Traditional Shot Peening and Micro-Shot Peening on the Scuffing Resistance of Carburized and Quenched Gear Steel,” Wear, 368-369, pp 253–257. doi:10.1016/j.wear.2016.09.029
   Web of Science ®Google Scholar
• Zammit, A., Abela, S., Wagner, L., Mhaede, M., Wan, R., and Grech, M. (2016), “The Effect of Shot Peening on the Scuffing Resistance of Cu-Ni Austempered Ductile Iron,” Surface and Coatings Technology, 308, pp 213–219. doi:10.1016/j.surfcoat.2016.06.089
   Web of Science ®Google Scholar
• SAE 9310 (2013), Data on Worldwide Metals and Alloys, ASM International: Almere, the Netherlands.
   Google Scholar
• ISO 6336-3 (2017), “Calculation of Load Capacity of Spur and Helical Gears—Part 20: Calculation of Scuffing Load Capacity (also Applicable to Bevel and Hypoid Gears)—Flash Temperature Method,” The International Organization for Standardization.
   Google Scholar
• Zhang, B., Wei, P., Liu, H., Yan, H., and Guagliano, M. (2022), “Effect of Fine Particle Peening on Surface Integrity of Flexspline in Harmonic Drive,” Surface and Coatings Technology, 433, 128133. doi:10.1016/j.surfcoat.2022.128133
   Web of Science ®Google Scholar
• AGMA 925-A03 (2003), Effect of Lubrication on Gear Surface Distress, American Gear Manufacturers Association: Alexandria, VA.
   Google Scholar
• Dowson, D., Higginson, G. R., and Klaus, W. N. (1978), “Elasto-Hydrodynamic Lubrication (International Series in Material, Science, and Technology, Vol. 23),” Journal of Lubrication Technology, 100, pp 447–447. doi:10.1115/1.3453207
   Google Scholar
• Liu, Y., Wang, Y., and Zhang, J. (2012), New Machine Learning Algorithm: Random Forest, Springer Berlin Heidelberg: Berlin.
   Google Scholar
• Lyu, B., Meng, X., Zhang, R., and Wen, C. (2021), “A Deterministic Contact Evolution and Scuffing Failure Analysis Considering Lubrication Deterioration Due to Temperature Rise under Heavy Loads,” Engineering Failure Analysis, 123, 105276. doi:10.1016/j.engfailanal.2021.105276
   Web of Science ®Google Scholar
• Chen, T., Zhu, C., Liu, H., Wei, P., Zhu, J., and Xu, Y. (2022), “Simulation and Experiment of Carburized Gear Scuffing under Oil Jet Lubrication,” Engineering Failure Analysis, 139, 106406. doi:10.1016/j.engfailanal.2022.106406
   Web of Science ®Google Scholar