REFERENCES
- Lundberg , G. and Palmgren , A. , “ Dynamic Capacity of Rolling Bearings ,” Acta Polytech. , Mech. Eng. Series 1 , Royal Swedish Academy of Engineering Sciences , Stockholm , ( 1947 ).
- Kepple , R. K. and Mattson , R. L. , “ Rolling Element Fatigue and Macro-residual Stress ,” ASME Jour. Lubr. Tech. 92 , 1 , pp 76 – 82 ( 1970 ).
- Gentile , A. J. and Martin , A. D. , “ The Effects of Prior Metallurgically Induced Compressive Residual Stress on the Metallurgical and Endurance Properties of Overload Tested Ball Bearings ,” ASME Winter Annual Meeting, Paper No. 65-WA/CF-7 , ( 1965 ).
- Scott , R. L. , Kepple , R. K. and Miller , M. H. , “ The Effect of Processing-Induced Near-Surface Residual Stress on Ball Bearing Fatigue ,” in Rolling Contact Phenomena , Bidwell , J. B. , ed., Elsevier , Amsterdam , ( 1962 ), pp 301 – 316
- Zaretsky , E. V. , ed., STLE Life Factors for Rolling Bearings , STLE , Park Ridge , IL , SP-34, ( 1992 ), pp 165 – 172
- Clark , J. C. , “ Fracture Tough Bearings for High Stress Applications ,” Proc. of the AIAA/SAE/ASME/ASEE 21st Joint Propulsion Conference , Paper No. AIAA-85-1138 , ( 1985 ).
- Clark , J. C. , “ Fracture Failure Modes in Lightweight Bearings ,” Jour. Aircraft , 12 , pp 383 – 387 ( 1975 ).
- Czyżewski , T. , “ Influence of a Tension Stress Field Introduced in the Elastohydrodynamic Contact Zone on Rolling Contact Fatigue ,” Wear , 34 , pp 201 – 214 ( 1975 ).
- Averbach , B. L. et al., “ Fatigue Crack Propagation in Carburized High Alloy Bearing Steels ,” Metall. Trans. A , 16A , pp 1253 – 1265 ( 1985 ).
- Coe , H. H. and Zaretsky , E. V. , “ Effect of Interference Fits on Roller Bearing Fatigue Life ,” ASLE Trans. , 30 , pp 131 – 140 ( 1986 ).
- Harris , T. A. , Ragen , M. A. and Spitzer , R. F. , “ The Effect of Hoop and Material Residual Stresses on the Fatigue Life of High Speed Rolling Bearings ,” Trib. Trans. , 35 , 1 , pp 194 – 198 ( 1992 ).
- Broszeit , E. , Zwirlein , O. , “ Internal Stresses and Their Influence on Material Stresses in Hertzian Contacts—Calculations With Different Stress Hypotheses ,” ASME Jour. of Trib. , 108 , pp 387 – 393 ( 1986 ).
- Ewing , J. A. and Humfrey , J. C. W. , “ The Fracture of Metals Under Repeated Alternations of Stress ,” Philos. Trans. , 200 , pp 241 – 253 ( 1903 ).
- Smith , J. O. , “ The Effect of Range of Stress on the Fatigue Strength of Metals ,” Univ. of III. Bull. , 50 , 26 . ( 1942 ).
- Wang , C. H. and Miller , K. J. , “ The Effect of Mean Shear Stress on Torsional Fatigue Behavior ,” Fatigue Fract. Engng. Mater. Struct. , 14 , 2 /3, pp 293 – 307 ( 1991 ).
- Crossland , B. , “ The Effect of Fluid Pressure on the Shear Properties of Metals ,” Proc. I. Mech. E. , 168 , 40 , pp 935 – 946 ( 1954 ).
- Crossland , B. , “ Effect of Large Hydrostatic Pressures on the Torsional Fatigue Strength of an Alloy Steel ,” Proc. of the Int'l. Conf. on Fatigue of Metals , ( 1956 ), pp 138 – 149
- Morrison , J. L. M. , Crossland , B. and Parry , J. S. C. , “ Fatigue Under Triaxial Stress: Development of a Testing Machine and Preliminary Results ,” Proc, I. Mech. E. , 170 , 21 , ( 1956 ), p 697 .
- Parry , J. S. C. , “ Further Results of Fatigue Under Triaxial Stress ,” Proc. of the. Int'l. Conf. on Fatigue of Metals , ( 1956 ), pp 132 – 137
- Socie , D. and Bannantine , J. , “ Bulk Deformation Fatigue Damage Models ,” Mat'ls. Sci. and Eng , A 103 , pp 3 – 13 ( 1988 ).
- Bannantine , J. A. , “ A Review of Multiaxial Fatigue Damage Models and Observed Material Behavior ,” in Impact of Improved Material Quality on Properties, Product Performance, and Design , Muralidharan , U. , ed., ASME , New York , ( 1991 ), pp 213 – 229
- McDowell , D. L. and Ellis , R. , eds., Advances in Multiaxial Fatigue , ASTM , Philadelphia , ASTM STP 1191 , ( 1993 ).
- Socie , D. , “ Critical Plane Approaches for Multiaxial Fatigue Damage Assessment ,” in Advances in Multiaxial Fatigue , McDowell , D. L. , Ellis , R. eds., ASTM , Philadelphia , ASTM STP 1191, ( 1993 ), pp 7 – 36
- Sines , G. , “ Failure of Materials under Combined Repeated Stresses with Superimposed Static Stresses ,” National Advisory Council for Aeronautics , Washington , D.C. , NACA Technical Note No. TN 3495 , ( 1955 ).
- Sines , G. and Ohgi , G. , “ Fatigue Criteria Under Combined Stresses or Strains ,” ASME Jour. of Eng. Mat'ls, and Tech. , 103 , pp 82 – 90 ( 1981 ).
- Stulen , F. B. and Cummings , H. N. , “ A Failure Criterion for Multiaxial Fatigue Stresses ,” ASTM Proceedings , 54 , pp 822 – 835 ( 1954 ).
- Findley , W. N. , Coleman , J. J. and Hanley , B. C. , “ Theory for Combined Bending and Torsion Fatigue with Data for SAE 4340 Steel ,” Proc. of the International Conf. on Fatigue of Metals , ( 1956 ), pp 150 – 157
- Findley , W. N. , “ A Theory for the Effect of Mean Stress on Fatigue of Metals under Combined Torsional and Axial Load or Bending ,” ASME Jour, of Eng. for Ind. , 81 , pp 301 – 306 ( 1959 ).
- Fatemi , A. and Socie , D. F. , “ A Critical Plane Approach to Multiaxial Fatigue Damage Including Out-of-Phase Loading ,” Fatigue Fract. Engng. Mater. Struct. , 11 , 3 pp 149 – 165 ( 1988 ).
- Fatemi , A. and Kurath , P. , “ Multiaxial Fatigue Life Predictions Under the Influence of Mean-Stresses ,” ASME Jour. of Eng. Mat'ls, and Tech. , 110 , 4 , pp 380 – 388 ( 1988 ).
- Moyar , G. J. and Morrow , J. , “ Surface Failure of Bearings and Other Rolling Elements ,” Univ. of Ill. Bull. , 62 , 35 , ( 1964 ).
- Jiang , Y. R. and Sehitoglu , H. , “ Fatigue and Stress Analyses of Rolling Contact ,” Univ. of Ill. College of Eng., Report No. 161/UILU-ENG 92–3602 , University of Illinois , Urbana , ( 1992 ).
- Thomas , H. R. and Hoersch , V. A. , “ Stresses Due to the Pressure of One Elastic Solid Upon Another ,” University of Illinois College of Engineering Experiment Station Bulletin No. 212 , University of Illinois , Urbana , ( 1930 ).
- Lunden , R. , “ Contact Region Fatigue of Railway Wheels Under Combined Mechanical Rolling Pressure and Thermal Brake Loading ,” Wear , 144 , pp 57 – 70 ( 1991 ).
- Zhou , R. S. , “ Surface Topography and Fatigue Life of Rolling Contact Bearings ,” Trib. Trans. , 36 , 3 , pp 329 – 340 ( 1993 ).
- Kennedy , N. G. , “ Fatigue of Curved Surfaces in Contact Under Repeated Load Cycles ,” Proc. of the Int'l. Conf. on Fatigue of Metals , ( 1956 ), pp 401 – 407
- Greenert , W. J. , “ The Toroid Contact Roller Test as Applied to the Study of Bearing Materials ,” ASME Jour. of Basic Eng. , 84 , pp 181 – 191 ( 1962 ).
- Radzimovsky , E. I. , “ Stress Distribution and Strength Condition of Two Rolling Cylinders Pressed Together ,” Univ. of Illinois Bull. , 50 , 44 , ( 1953 ).
- Smith , J. O. and Liu , C. K. , “ Stresses Due to Tangential and Normal Loads on an Elastic Solid with Application to Some Contact Stress Problems ,” Jour. Appl. Mech. , 20 , pp 157 – 166 ( 1953 ).
- Chiu , Y. P. et al., “ A Mathematical Model of Spalling Fatigue Failure in Rolling Contact ,” ASLE Trans. , 12 , pp 106 – 116 ( 1969 ).
- Chiu , Y. P. , Tallian , T. E. and McCool , J. I. , “ An Engineering Model of Spalling Fatigue in Rolling Contact ,” Wear , 17 , pp 433 – 446 ( 1971 ).
- Ioannides , E. , Harris , T. A. , “ A New Fatigue Life Model for Rolling Bearings ,” ASME Jour. of Trib. , 108 , 3 , pp 367 – 378 ( 1984 ).
- Dang Van , K. , “ Composition of the Different Stress Conditions in the Wheel/Rail Contact Zone ,” in Question C 53: Behavior of the Metal of Rails and Wheels in the Contact Zone , ORE , Utrecht , ( 1972 ).
- Dang Van , K. , “ On the Resistance of Metal Fatigue ,” Sciences Tech. Arm. , 47 , pp 641 – 722 ( 1973 ).
- Liu , M. and Farris , T. N. , “ Effect of Three-Dimensional Near Surface Defects on Rolling and Sliding Contact Fatigue ,” STLE/ASME Tribology Conference Preprint, ASME Preprint No. 93-Trib-31 , ( 1993 ).
- Voskamp , A. P. , “ Material Response to Rolling Contact Loading ,” ASME Jour. of Trib. , 107 , pp 359 – 366 ( 1985 ).
- Johnson , K. L. , “ The Strength of Surfaces in Rolling Contact ,” Proc. I. Mech. E. , 203 , pp 151 – 163 ( 1989 ).
- Kumar , A. M. , Hahn , G. T. and Rubin , C. A. , “ A Study of Subsurface Crack Initiation Produced by Rolling Contact Fatigue ,” Metall. Trans. A , 24A , pp 351 – 359 ( 1993 ).
- Ghosn , L. J. , “ Analysis of Crack Propagation in Roller Bearings Using the Boundary Integral Equation Method—A Mixed-Mode Loading Problem ,” ASME Jour. of Trib. , 110 , 3 , pp 408 – 413 ( 1988 ).
- Fessler , H. and Ollerton , E. , “ Contact Stresses in Toroids Under Radial Loads ,” British Jour. of Applied Physics , 8 , pp 387 – 393
- Johnson , K. L. , “ Inelastic Contact: Plastic Flow and Shakedown ,” in Contact Mechanics and Wear of Rail/Wheel Systems , Proc. of the Int'l. Symp. , at Vancouver , Kalousek , J. , Dukkipati , R. and Gladwell , G. , eds., ( 1983 ), pp 79 – 101
- Hahn , G. T. , Rubin , C. A. , “ Elastoplastic Analysis of Repeated Rolling and Sliding Contact ,” in Advances in Engineering Tribology , Chung , Y. and Cheng , H. , eds., STLE , Park Ridge , IL , SP 31, ( 1991 ), pp 55 – 70
- McDowell , D. L. and Moyar , G. J. , “ Effects of Non-Linear Kinematic Hardening on Plastic Deformation and Residual Stresses In Rolling Line Contact ,” Wear , 144 , pp 19 – 37 ( 1991 ).
- Sachs , G. , Sell , R. and Brown , W. F. Jr. , “ Tension, Compression, and Fatigue Properties of Several Steels for Aircraft Bearing Applications ,” ASTM Proc , 59 , pp 635 – 661 ( 1959 ).
- Styri , H. , “ Fatigue Strength of Ball Bearing Races and Heat-Treated 52100 Steel Specimens ,” ASTM Proc , 51 , pp 682 – 700 ( 1951 ).
- Moyar , G. J. and Stone , D. H. , “ An Analysis of the Thermal Contributions to Railway Wheel Shelling ,” Wear , 144 , pp 117 – 138 ( 1991 ).