28
Views
9
CrossRef citations to date
0
Altmetric
Original Articles

Wear and Galling of 356-T6 Aluminum-on-Steel in Low Amplitude Reciprocating Sliding in the Presence of Synthetic Lubricants in HFC-134a Atmosphere

Pages 1-12 | Published online: 25 Mar 2008

REFERENCES

  • Tseregounis , S. I. , Spearot , J. A. , Rounds , F. G. , Baker , J. A. and Serrianne , B. C. , “ Laboratory Wear Tests for Qualifying Automotive Air-Conditioning Lubricants for Use with Refrigerant HFC-134a ,” Tribology: Wear Test Selection for Design and Application , Ruff , A. W. and Bayer , R. G. , eds., American Society for Testing and Materials , Philadelphia , ASTM STP 1199 , ( 1993 ).
  • Tseregounis , S. I. , Rounds , F. G. , Spearot , J. A. , LaLonde , R. A. , “ Block-on-Ring Wear Test. Methods for the Evaluation of Air-Conditioning Compressor Lubricants ,” General Motors Research and Development Center Research Publication , GMR-8018 and FL-962 , ( 1993 ).
  • Barber , G. C. , Matthews , J. J. and Jafry , S. , “ Wear and Scuff Resistance of Aluminum 390 ,” Lubr. Eng. , 47 , 5 , pp 423 – 430 ( 1990 ).
  • Beesley , C. and Eyre , T. S. , “ Friction and Wear of Aluminum Alloys Containing Copper and Zinc ,” Trib. Int'l , 9 , pp 63 – 69 ( 1976 ).
  • Pramila Bai , P. N. and Biswas , S. K. , “ Mechanism of Wear in Dry Sliding of a Hypocutectic Aluminum Alloy ,” Lubr. Eng. , 43 , 1 , pp 57 – 61 ( 1987 ).
  • Pramila Bai , P. N. , Biswas , S. K. and Kumtekar , N. N. , “ Scanning Electron Microscopy Study of Worn Al-Si Alloy Surfaces ,” Wear , 87 , pp 237 – 249 ( 1983 ).
  • Sarkar , A. D. and Clarke , J. , “ Friction and Wear of Aluminum-Silicon Alloys ,” Wear , 61 , p 157 – 167 ( 1980 ).
  • Sargent , L. B. , “ The Influence of Aluminum Oxides on the Transfer of Some Aluminum Alloys to Steel in Sliding Contact ,” Lubr. Eng. , 38 , 10 , pp 615 – 621 ( 1982 ).
  • Nantiyal , P. C. and Schey , J. A. , “ Transfer of Aluminum to Steel in Sliding Contact: Effects of Lubricant ,” ASME Jour. of Trib. , 112 , p 282 , ( 1990 ).
  • Poole , W. and Sullivan , J. L. , “ The Role of Aluminum Segregation in the Wear of Aluminum/Bronze-Steel Interfaces Under Conditions of Boundary Lubrication ,” ASLE Trans. , 23 , 4 , pp 401 – 408 ( 1979 ).
  • Ferrante , J. and Brainard , W. , “ Wear of Aluminum and Hypoeutectic Aluminum-Silicon Alloys in Boundary-Lubricated Pin-on-Disk Sliding ,” Nasa, Tech. Paper No. 1442 , ( 1979 ).
  • Pathak , J. P. , Tiwari , S. N. and Malhotra , S. L. , “ On the Wear Characteristics of Leaded Aluminum Bearing Alloys ,” Wear , 112 , pp 341 – 353 ( 1986 ).
  • Alpas , A. T. and Zhang , J. , “ Effect of SiC Particulate Reinforcement on the Dry Sliding Wear of Aluminum-Silicon Alloys (A356) ,” Wear , 155 , pp 83 – 104 ( 1992 ).
  • Overfelt , R. A. , Wert , J. J. and Hunt Jr. , W. H. , “ The Influence of Thermal Oxide Characteristics on the Friction Behavior of Aluminum Auto Body Sheet Alloys ,” ASLE Trans. , 24 , 2 , pp 175 – 185 ( 1980 ).
  • Lacmmle , J. T. and Bohaychick , J. , “ Novel Substituted Malonic Diesters: Effectiveness of Biden tatc Bonding of Additives on Aluminum Workpiece Surfaces ,” Lubr. Eng , 43 , 9 , pp 717 – 722 ( 1987 ).
  • Chambat , F. , Lahsermes , M. and Hendricks , H. , “ Organometallic Compounds Produced During Aluminum Cold Rolling ,” Lubr. Eng. , 43 , 7 , pp 522 – 527 ( 1987 ).
  • Mori , S. , Suginoya , M. and Tamai , Y. , “ Chemisorption of Organic Compounds on a Clean Aluminum Surface Prepared by Cutting Under High Vacuum ,” ASLE Trans. , 25 , 2 , pp 261 – 266 ( 1980 ).
  • Kawamura , M. and Fujita , K. , “ Antiwear Property of Lubricant Additives for High Silicon Aluminum Alloy Under Boundary Lubricating Conditions ,” Wear , 89 , pp 99 – 105 ( 1983 ).
  • Poole , W. and Sullivan , J. L. , “ The Wear of Aluminum-Bronze on Steel in the Presence of Aviation Fuel ,” ASLE Trans. , 22 , 2 , pp 154 – 161 ( 1978 ).
  • Montgomery , R. S. , “ The Lubrication of Aluminum by Phthalic Acid Esters ,” Wear , 9 , pp 297 – 299 ( 1996 ).
  • Sargent , Jr. L. B. , Milz , W. C. and Atkinson , R. E. , “ The Effect of Aluminum Transfer Upon the Friction Between Aluminum Alloys and Steel. ” Lubr. Eng. , 39 , 11 , pp 706 – 711 ( 1983 ).
  • Bruce , R. W. , “ A High-Temperature Tribo-Test for Lubricated Contacts of Aluminum Against Steel ,” Lubr. Eng. , 41 , 7 , pp 430 – 433 ( 1985 ).
  • Blau , P. J. and Whitenton , E. P. , “ The Effect of Flat-on-Ring Sample Alignment on Sliding Friction Break-in Curves for Aluminum Bronze on 52100 Steel. ” Wear , 94 , pp 201 – 210 ( 1984 ).
  • Archard , J. F. , “ Contact and Rubbing of Flat Surfaces ,” J. Appl Phys. , 24 , pp 981 – 988 ( 1953 ).
  • Rabinowicz , E. , “ The Wear Coefficient-Magnitude, Scatter, Uses ,” ASME Jour. of Lubr. Tech. , 103 , pp 188 – 194 ( 1981 ).
  • Murray , S. F. , Johnson , R. L. and Swikert , M. A. , “ Difluorodichlorome-thane. As a Boundary Lubricant for Steel and Other Metals ,” Mech. Eng. , 78 , p233 , ( 1956 ).
  • Komatsuzaki , S. and Homma , Y. , “ Antiseizure and Antiwear Properties of Lubricating Oils Under Refrigerant Gas Environments ,” STLE Annual Meeting , Preprint No. 90-AM-6C-1 , ( 1990 ).
  • Factor , A. and Miranda , P. M. , “ An Investigation of the Mechanism of the R12-Oil-Sleel Reaction ,” Wear , 150 , pp 41 – 58 ( 1991 ).
  • Mizuhara , K. , Akei , M. and Matsuzaki , T. “ The Friction and Wear Behavior in Controlled Alternative Refrigerant Atmosphere ,” Trib. Trans. , 37 , 1 , pp 120 – 128 ( 1994 ).
  • Komatsuzaki , S. , Tomobe , T. and Hon-Ma , Y. , “ Additive Effects on Lubricity and Thermal Stability of Refrigerator Oils ,” Lubr. Eng. , 43 , 1 , pp 31 – 36 ( 1987 ).
  • Handbook of Chemistry and Physics , Weast , R. C. , ed., CRC Press , Cleveland , 63rd ed. , ( 1982 ).
  • Torabian , H. , Pathak , J. B. and Tiwari , S. N. , “ Wear Characteristics of Al-Si Alloys ,” Wear , 172 , pp 49 – 58 ( 1994 ).
  • Komatsuzaki , S. , Homma , Y. , Itoh , Y. , Kawashima , K. and Iizuka , T. , “ Polyol Esters as HFC-134a Compressor Lubricants ,” Lubr. Eng. , 50 , 10 , pp 801 – 807 ( 1994 ).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.