43
Views
11
CrossRef citations to date
0
Altmetric
Original Articles

Micro-EHL Analysis of Ground and Superfinished Steel Discs Used to Simulate Gear Tooth Contacts

, &
Pages 595-602 | Published online: 25 Mar 2008

REFERENCES

  • Glossary of Terms and Definitions in the Field of Friction, Wear and Lubrication , OECD, Paris, pp 52 – 53 ( 1969 ).
  • Patching , M. J. , Kweh , C. C. , Evans , H. P. and Snidle , R. W. , “ Conditions for Scuffing Failure of Ground and Superfinished Steel Discs at High Sliding Speeds using a Gas Turbine Engine Oil ,” ASME Jour. of Trib. , 117 , pp 482 – 489 ( 1995 ).
  • Dowson , D. and Higginson , G. R. , Elastohydrodynamic Lubrication , Pergamon Press , Oxford , UK , ( 1966 ).
  • Goglia , P. R. , Cusano , C. and Conry , T. F. , “ The Effects of Surface Irregularities on the Elastohydrodynamic Lubrication of Sliding Line Contacts. Part I—Single Irregularities; Part II—Wavy Surfaces ,” ASME Jour. of Trib. , 106 , pp 104 – 119 ( 1984 ).
  • Lubrecht , A. A. , Ten Napel , W. E. and Bosma , R. , “ The Influence of Longitudinal and Transverse Roughness on the Elastohydrodynamic Lubrication of Circular Contacts ,” ASME Jour. of Trib. , 110 , pp 421 – 426 ( 1988 ).
  • Kweh , C. C. , Evans , H. P. and Snidle , R. W. , “ Micro-Elastohydrodynamic Lubrication of an Elliptical Contact with Transverse and Three-Dimensional Sinusoidal Roughness ,” ASME Jour. of Trib , 111 , pp 577 – 584 ( 1989 ).
  • Elsharkawy , A. A. and Hamrock , B. J. , “ Subsurface Stresses in Micro-EHL Line Contacts ,” ASME Jour. of Trib , 113 , pp 645 – 655 ( 1991 ).
  • Sadeghi , F. , “ A Comparison of the Fluid Model's Effect on the Internal Stress of Rough Surfaces ,” ASME Jour. of Trib. , 113 , pp 142 – 149 ( 1991 ).
  • Kweh , C. C. , Patching , M. J. , Evans , H. P. and Snidle , R. W. , “ Simulation of Elastohydrodynamic Contacts Between Rough Surfaces ,” ASME Jour. of Trib , 114 , pp 412 – 419 ( 1992 ).
  • Venner , C. H. and Ten Napel , W. E. , “ Surface Roughness Effects in an EHL Line Contact ,” ASME Jour. of Trib , 114 , pp 616 – 622 ( 1992 ).
  • Chang , L. and Webster , M. N. , “ A Study of Elastohydrodynamic Lubrication of Rough Surfaces ,” ASME Jour. of Trib. , 113 , pp 110 – 115 ( 1991 ).
  • Chang , L. , “ Traction in Thermal Elastohydrodynamic Lubrication of Rough Surfaces ,” ASME Jour. of Trib , 114 , pp 186 – 191 ( 1992 ).
  • Chang , L. , Webster , M. N. and Jackson , A. , “ On the Pressure Rippling and Roughness Deformation in Elastohydrodynamic Lubrication of Rough Surfaces ,” ASME Jour. of Trib. , 115 , pp 439 – 444 ( 1993 ).
  • Ai , X. and Cheng , H. S. , “ A Transient EHL Analysis for Line Contacts with Measured Surface Roughness using Mtiltigrid Technique ,” 1993 STLE/ASME Tribology Conference, ASME Paper No. 93-Trib-56 , ( 1993 ).
  • Chang , L. and Zhao , W. , “ Fundamental Differences between Newtonian and Non-Newtonian Micro-EHL Results ,” ASME Jour. of Trib , 117 , pp 29 – 35 ( 1995 ).
  • Evans , H. P. and Snidle , R. W. , “ A Model for Elastohydrodynamic Film Failure in Contacts Between Rough Surfaces Having Transverse Finish ,” ASME Jour. of Trib , 118 , ( 1996 ).
  • Patching , M. J. , “ The Effect of Surface Roughness on the Micro-Elastohydrodynamic Lubrication and Scuffing Performance of Aerospace Gear Tooth Contacts ,” Ph.D. Dissertation, University of Wales , Cardiff , UK , ( 1994 ).
  • Evans , H. P. and Snidle , R. W. , “ The Elasiohydrodynamic Lubrication of Point Contacts at Heavy Loads ,” Proc. R. Soc., London , A382 , pp 183 – 199 ( 1982 ).
  • Kweh , C. C. , Evans , H. P. and Snidle , R. W. , “ Elastohydrodynamic Lubrication of Heavily Loaded Circular Contacts ,” Proc. I.Mech.E. , 203C , pp 133 – 148 ( 1989 ).
  • Snidle , R. W. and Evans , H. P. , “ A Simple Method of Elastic Contact Simulation ,” Proc. I.Mech.E. , 208 , pp 291 – 293 ( 1994 ).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.