REFERENCES
- Rabinowicz , E. , Friction and Wear of Materials , John Wiley and Sons , New York , ( 1965 ).
- Polycarpou , A. and Soom , A. , “ Transitions Between Sticking and Slipping ,” in Proc. ASME Winter Annual Meeting , Anahem , DE , 49 , pp 139 – 148 ( 1992 ).
- Bell , R. and Burdekin , M. , “ A Study of the Stick-Slip Motion of Machine Tool Feed Drives ,” Proc. of IMechE , 184 , 29 , pp 543 – 560 ( 1969 ).
- Armstrong-Helouvry , B. , Control of Machines with Friction , Kluwer Academic Publishers , Boston , ( 1991 ).
- Ibrahim , R. A. , “ Friction-Induced Vibration, Chatter, Squeal, and Chaos, Part II ,” in Proc. ASME Winter Annual Meeting , Anahem, DE, 49 , 107 – 138 ( 1992 ).
- Stribeck , R. , “ The Important Qualities of Sliding and Roller Bearings ,” Zeitschrift des Vereines Deutscher Ingenieure , 46 , 39 , pp 1432 – 1437 ( 1902 ), (in German).
- Dahl , P. R. , “ A Solid Friction Model ,” The Aerospace Corporation, El Segundo, CA, AFO 4695-67-C-D158 , ( 1968 ).
- Dahl , P. R. , “ Measurement of Solid Friction Parameters of Ball Bearings ,” in Proc. of 6th Annual Symp. on Incremental Motion, Control Systems and Devices , University of Illinois , Champaign , IL , ( 1977 ).
- Armstrong-Helouvry , B. , “ Stick-slip and Control in Low-Speed Motion ,” IEEE Trans, on Automatic Control. , 38 , pp 1483 – 1496 ( 1993 ).
- Hess. , D. P. and Soom , A. , “ Friction at a Lubricated Line Contact Operating at Oscillating Sliding Velocities ,” ASME four, of Trib. , 112 , pp 147 – 152 ( 1990 ).
- Dupont , P. E. , “ Avoiding Stick-Slip Through PD Control ,” IEEE Trans. on Automatic Control , 39 , 5 , pp 1094 – 1097 ( 1994 ).
- Dupont , P. E. , and Dunlap , E. P. , “ Friction Modeling and Control in Boundary Lubrication ,” in Proc. of the American Control Conf , San Francisco , CA , pp 1910 – 1914 ( 1993 ).
- Rice , J. R. and Ruina , A. L. , “ Stability of Steady Frictional Slipping ,” ASME four, of Appl. Mech. , 50 , pp 343 – 349 ( 1983 ).
- Canudas de Wit , C. , Olsson , H. , Astrom , K. J. and Lischinsky , P. , “ Dynamic Friction Models and Control Design ,” in Proc. of the American Control Conf , San Francisco , CA , pp 1920 – 1926 ( 1993 ).
- Harnoy , A. and Friedland , B. , “ Dynamic Friction Model of Lubricated Surfaces for Precise Motion Control ,” Trib. Trans. , 37 , 3 , pp 608 – 614 ( 1994 ).
- Harnoy , A. , Friedland , B. and Rachoor , H. , “ Modeling and Simulation of Elastic and Friction Forces in Lubricated Bearings for Precise Motion Control ,” Wear , 172 , pp 155 – 165 ( 1994 ).
- Harnoy , A. , Friedland , B. , Scmenock , R. , Rachoor , H. and Aly , A. , “ Apparatus for Empirical Determination of Dynamic Friction ,” in Proc. American Control Conf , Baltimore, MD, 1 , pp 546 – 550 ( 1994 ).
- Rachoor , H. , “ Investigation of Dynamic Friction in Lubricated Surfaces ,” Ph.D. Dissertation, New Jersey Institute of Technology , Newark , NJ , ( 1996 ).
- Dubois , G. B. and Ocvirk , E. W. , “ Analytical Derivation and Experimental Evaluation of Short Bearing Approximation for Full Journal Bearings ,” NASA Report No. 1157 , NASA, Washington, D.C. ( 1953 ).
- Harnoy , A. and Rachoor , H. , “ Angular Compliant Hydrodynamic Bearing Performance Under Dynamic Loads ,” ASME Jour. of Trib. , 115 , ( 1993 ).
- Johannes , V. I. , Green , M. A. and Brockley , C. A. , “ The Role of Rate of Application of the Tangential Force in Determining the Static Friction Coefficient ,” Wear , 24 , pp 383 – 385 ( 1973 ).