Wear of Brush Seals: Background and New Modeling Approach

REFERENCES

• Atkinson , E. and Bristol , B. , “ Effects of Material Choices on Brush Seal Performance ,” Lubr. Eng. , 48 , pp 740 – 746 ( 1992 ).
   Google Scholar
• Fellenstein , J. A. and DellaCorte , C. , “ A New Tribological Test for Candidate Brush Seal Materials Evaluation ,” Trib. Trans. , 39 , pp 173 – 179 ( 1996 ).
   Web of Science ®Google Scholar
• Derby , J. and England , R. , “ Tribopair Evaluation of Brush Seal Applications ,” AIAA/SAE/ASME/ASEE 28th Joint Propulsion Conference Paper No. AIAA 92-3715 , AIAA , ( 1992 ).
   Google Scholar
• Hawthorne , H. M. , “ Brush-on-Disk Simulation Tribe-Testing of Materials for Gas Turbine-Compliant Seal Components ,” Trib. Int'l. , 27 , pp 87 – 95 ( 1994 ).
   Google Scholar
• Fellenstein , J. A. , DellaCorte , C. , More , K. D. and Boyes , E. , “ High Temperature Brush Seal Tuft Testing of Metallic Bristles Versus Chrome Carbide ,” AIAA/SAE/ASME/ASEE 32nd Joint Propulsion Conference Paper No. AIAA 96-2908 , AIAA , ( 1996 ).
   Google Scholar
• Chupp , R. E. and Prior , R. J. , “ Update on Brush Seal Development for Large Industrial Gas Turbines ,” AIAA/SAE/ASME/ASEE 32nd Joint Propulsion Conference Paper No. AIAA 96-3306 , AIAA , ( 1996 ).
   Google Scholar
• Mayhew , E. R. , Bill , R. C. and Voorhees , W. J. , “ Military Engine Seal Development: Potential for Dual Use. ” AIAA/SAE/ASME/ASEE 30th Joint Propulsion Conference Paper No. AIAA 94-2699 , AIAA , ( 1994 ).
   Google Scholar
• Howe , H. W. , Jarrabet , C. P. , Lu , L. and Tolokan , R. P. , “ Advanced Engine Seals for Low Leakage and Long Life ,” AIAA/SAE/ASME/ASEE 30th Joint Propulsion Conference Paper No. AIAA 94-2805 , AIAA , ( 1994 ).
   Google Scholar
• Howe , H. W. , “ Ceramic Brush Seals Development ,” NASA CP-10136 , pp 133 – 150 ( 1993 ).
   Google Scholar
• Ferguson , J. G. , “ Brushes as High Performance Gas Turbine Seals ,” ASME Paper No. 88-GT-182 , ASME , New York , ( 1988 ).
   Google Scholar
• Hendricks , R. C. , Griffin , T. A. , Bobula , G. A. , Bill , R. C. and Howe , H. W. , “ Integrity Testing of Brush Seal in Shroud Ring of T-700 Engine ,” ASME Paper No. 93-GT-373 , ASME , New York , ( 1993 ).
   Google Scholar
• Hendricks , R. C. , Carlile , J. A. and Liang , A. D. , “ Brush Seal Bristle Flexure and Hard-Rub Characteristics ,” NASA TM-105864 , ( 1992 ).
   Google Scholar
• Hendricks , R. C. , Carlile , J. A. and Liang , A. D. , “ Brush Seal Low Surface Speed Hard-Rub Characteristics ,” AIAA/SAE/ASME/ASEE 29th Joint Propulsion Conference Paper No. AIAA 93-2534 , AIAA , ( 1993 ).
   Google Scholar
• Hendricks , R. C. , Schlumberger , S. , Braun , M. J. , Choy , F. and Mullen , R. L. , “ A Bulk Flow Model of a Brush Seal System ,” ASME Paper No. 91-GT-325 , ASME , New York , ( 1991 ).
   Google Scholar
• Basu , P. , Datia , A. , Johnson , R. , Loewenthal , R. and Short , J. , “ Hysteresis and Bristle Stiffening Effects of Conventional Brush Seals ,” AIAA/SAE/ ASME/ASEE 29th Joint Propulsion Conference Paper No. AIAA 93-1996 , AIAA , ( 1996 ).
   Google Scholar
• Flower , R. , “ Brush Seal Development System ,” AIAA/SAE/ASME/ASEE 26th Joint Propulsion Conference Paper No. AIAA 90-2143 , AIAA , ( 1990 ).
   Google Scholar
• Hendricks , R. C. , Braun , M. J. , Canacci , V. A. and Mullen , R. L. , “ Brush Seals in Vehicle Tribology ,” in Proc. of the 13th Leeds-Lyon Symp. on Tribology , Paper No. E-5712 , ( 1990 ).
   Google Scholar
• Modi , V. , “ Modeling Bristle Lift-off in Idealized Brush Seal Configurations ,” NASA CP-10124 , ( 1992 ).
   Google Scholar
• Chew , J. W. , Lapworth , B. L. and Millener , P. J. , “ Mathematical Modeling of Brush Seals ,” Int'l. Jour. Heat and Fluid Flow , 16 , pp 493 – 500 ( 1995 ).
   Google Scholar
• Sharatchandra , M. C. and Rhode , D. L. , “ Computed Effects of Rotor-Induced Swirl on Brush Seal Performance—Part 2: Brisde Force Analysis ,” ASME Jour. of Trib. , 118 , pp 920 – 926 ( 1996 ).
   Web of Science ®Google Scholar
• ABAQUS/Standard User's Manual, 1, Version 5.4 , Hibbitt, Karlsson & Sorensen, Inc. , Pawtucket , RI , ( 1994 ).
   Google Scholar
• Chupp , R. E. and Nelson , P. , “ Evaluation of Brush Seals for Limited-Life Engines ,” AIAA/SAE/ASME/ASEE 26th Joint Propulsion Conference Paper No. AIAA 90-2140 , AIAA , ( 1990 ).
   Google Scholar
• Hendricks , R. C. , Proctor , M. , Schlumberger , S. , Braun , M. J. and Mullen , R. L. , “ Some Preliminary Results of Brush Seal/Rotor Interference Effects on Leakage at Zero and Low RPM Using a Tapered-Plug Rotor ,” AIAA/SAE/ASME/ASEE 27th Joint Propulsion Conference Paper No. AIAA 91-3390 , AIAA , ( 1991 ).
   Google Scholar
• Schlumberger , J. A. , Proctor , M. P. and Hendricks , R. C. , “ Eccentricity Effects on Leakage of a Brush Seal at Low Speeds ,” NASA TM-105141 , ( 1991 ).
   Google Scholar
• Short , J. , Basu , P. , Datta , A. , Loewenthal , R. and Prior , R. J. , “ Advanced Brush Seal Development ,” AIAA/SAE/ASME/ASEE 32nd Joint Propulsion Conference Paper No. AIAA 96-2907 , AIAA , ( 1996 ).
   Google Scholar
• Gorelov , G. M. , Reznik , V. E. and Tsibizov , V. I. , “ Experimental Study of Brush Seal Flow Characteristics and Comparison with a Labyrinth Seal ,” Izvestiya VUZ. Aviatsionnaya Takhnika , 31 , pp 43 – 46 ( 1988 ).
   Google Scholar