REFERENCES
- T. C. Boberg , Thermal Methods of Oil Recovery , Exxon Monograph , Wiley , New York , 1988 .
- C. D. Rudd , A. C. Long , K. N. Kendall , and C. G. E. Mangin , Liquid Molding Technologies , Woodhead Publishing , 1997 .
- M. Kaviany , Principles of Heat Transfer in Porous Media , 2nd ed., Springer-Verlag , New York , 1995 .
- J. Bear and Y. Bachmat , Introduction to Modeling of Transport Phenomena in Porous Media , Kluwer , 1990 .
- J. Douglas , Jr. , and T. Arbogast , Dual Porosity Models for Flow in Naturally Fractured Reserviors , in J. Cushman (ed.), Dynamics of Fluids in Hierarchical Porous Media , Academic Press , 1990 .
- K. O'Neill and G. F. Pinder , A Derivation of Equations for Transport of Liquid and Heat in Three Dimensions in a Fractured Porous Medium , Adv. Water Resources , vol. 4 , pp. 150 – 164 , 1981 .
- S. M. Hassanizadeh , Modeling Species Transport by Concentrated Brine in Aggregated Porous Media, Transport Porous Media , vol. 3, pp. 299–318, 1988.
- K. M. Pillai and S. G. Advani , A Model for Unsaturated Flow in Woven Fiber Preforms during Mold Filling in Resin Transfer Molding , J. Composite Mater ., vol. 32 , no. 19 , pp. 1753 – 1783 , 1998 .
- K. M. Pillai and S. G. Advani , Numerical Simulation of Unsaturated Flow in Woven Fiber Preforms during the Resin Transfer Molding Process . Polymer Composites , vol. 19 , no. 1 , pp. 71 – 80 , 1998 .
- K. M. Pillai and S. G. Advani , Numerical and Analytical Study to Estimate the effect of Two Length Scales upon the Permeability of a Fibrous Porous Medium , Transport Porous Media , vol. 21 , pp. 1 – 17 , 1995 .
- R. S. Parnas , J. G. Howard , T. L. Luce , and S. G. Advani , Permeability Characterization, Part 1: A Proposed Standard Reference Fabric for Permeability , Polymer Composites , vol. 16 , no. 6 , pp. 429 – 445 , 1995 .
- Y. D. Parseval , K. M. Pillai , and S. G. Advani , A Simple Model for the Variation of Permeability due to Partial Saturation in Dual Scale Porous Media , Transport Porous Media , vol. 27 , pp. 243 – 264 , 1997 .
- B. Z. Babu , The Effect of Fiber-Mat Compression and the Architecture on the Unsaturated Flow in Liquid Composite Molding—An Experimental Study, Masters' thesis , University of Wisconsin—Milwaukee , 2002 .
- B. Z. Babu and K. M. Pillai , New Experimental Findings on the Resin Impregnation Process in Woven, Stitched or Braided Fiber Mats in Liquid Composite Molding Processes , Proc. SAMPE 2002 , Long Beach , CA , 2002 .
- B. Z. Baiju and K. M. Pillai , Experimental Investigation of the Effect of Fiber-Mat Architecture on the Unsaturated Flow in Liquid Composite Molding , J. Composite Mater ., vol. 38 , no. 1 , pp. 57 – 79 , 2004 .
- C. L. Tucker , III and R. B. Dessenberger , Governing Equations for Flow and Heat Transfer in Stationary Fiber Beds , in S. G. Advani (ed.), Flow and Rheology in Polymer Composites Manufacturing , chap. 8 , Elsevier , Amsterdam , 1994 .
- K. M. Pillai , Governing Equations for Unsaturated Flow through Woven Fiber Mats, Part 1: Isothermal Flows , Composites A , vol. 33 , pp. 1007 – 1019 , 2002
- R. S. Jadhav and K. M. Pillai , Numerical Study of Heat Transfer during Unsaturated Flow in Dual-Scale Porous Media , Numer. Heat Transfer A , vol. 43 , pp. 385 – 407 , 2003 .
- T. Roy and K. M. Pillai , Characterization of Dual-Scale Fiber Mats for Unsaturated Flow in Liquid Composite Molding , Polymer Composites , under review .
- K. M. Pillai and M. S. Munagavalsa , Governing Equations for Unsaturated Flow through Woven Fiber Mats, Part 2: Non-isothermal Reactive Flows , Composites A , vol. 35 , pp. 403 – 415 , 2004 .
- T. Roy , B. Z. Babu , and K. M. Pillai , First Steps towards Quantitative Validation of the Unsaturated Flow Theories in Liquid Composite Molding Proc. ASME International: Summer Heat Transfer Conf. , Las Vegas , NV , July 21 – 23 , 2003 .
- R. J. Duh , S. Mantell , J. H. Vogel , and R. Maier , Optimization of Cure Kinetics Parameter Estimation for Structural Reaction Injection Molding/Resin Transfer Molding , Polymer Composites , vol. 22 , no. 6 , 2001 .
- N. D. Ngo , R. V. Mohan , P. W. Chung , K. K. Tamma , and D. R. Shires , Recent Developments Encompassing Non-isothermal/Isothermal Liquid Composite Molding Process Modeling/Analysis: Physically Accurate, Computationally Effective, and Affordable Simulations and Validations , J. Thermoplastic Composite Mater ., vol. 11 , pp. 493 – 532 , November 1998 .
- F. P. Incropera and D. D. Dewitt , Fundamentals of Heat and Mass Transfer , Wiley , New York , 1985 .
- R. S. Jadhav , A Numerical Study of Non-isothermal Reactive Flow in Dual-Scale Porous Media, M.S. thesis, University of Wisconsin , Milwaukee , 2003.
- J. Bear , Dynamics of Fluids in Porous Media , Dover , New York , 1972 .
- R. C. Lam and J. L. Kardos , The Permeability and Compressibility of Aligned and Cross-Plied Carbon Fiber Beds during Processing of Composites , Polymer Eng ., vol. 31 , 1991 .
- K. M. Pillai and S. G. Advani , Wicking across a Fiber Bank , J. Colloid Interface Sci ., vol. 183 , no. 1 , pp. 100 – 110 , 1996 .
- S. V. Patankar , Numerical Heat Transfer and Fluid Flow , McGraw-Hill/Hemisphere , New York , 1980 .
- R. S. Jadhav and K. P. Pillai , Investigation of Heat Transfer and Cure during the Unsaturated Flow in Woven, Stitched and Braided Mats , Proc. ASME Natl. Heat Transfer Conf. , Las Vegas , NV , July 2003 .