Publication Cover
Numerical Heat Transfer, Part A: Applications
An International Journal of Computation and Methodology
Volume 49, 2006 - Issue 9
371
Views
37
CrossRef citations to date
0
Altmetric
Original Articles

Analysis of Simplifying Assumptions for the Numerical Modeling of the Heat and Mass Transfer in a Porous Desiccant Medium

, &
Pages 851-872 | Published online: 01 Sep 2006

REFERENCES

  • D. Charoensupaya and W. M. Worek , Effects of Adsorbent Heat and Mass Transfer Resistances on Performance of an Open-Cycle Adiabatic Desiccant Cooling System , Heat Recovery Syst. CHP , vol. 8 , no. 6 , pp. 537 – 548 , 1988 . [CSA]
  • P. Majumdar , Heat and Mass Transfer in Composite Pore Structures for Dehumidification , Solar Energy , vol. 62 , no. 1 , pp. 1 – 10 , 1998 . [CSA] [CROSSREF]
  • R. K. Collier , Desiccant Properties and Their Effect in Cooling System Performance , ASHRAE Trans. , vol. 95 , no. 1 , pp. 823 – 827 , 1989 . [CSA]
  • S. D. Grumbach , The Transient Response of Rotary Desiccant Wheels through Experimentation and Numerical Analysis, Ph.D. thesis , University of Colorado at Boulder , Boulder , CO , 1999 .
  • H. I. Henderson and J. R. Sand , An Hourly Building Simulation Tool to Evaluate Hybrid Desiccant System Configuration Options , ASHRAE Trans. , vol. 109 , no. 2 , pp. 551 – 564 , 2003 . [CSA]
  • I. L. Maclaine-Cross and P. J. Banks , Coupled Heat and Mass Transfer in Regenerators—Prediction Using an Analogy with Heat Transfer , Int. J. Heat Mass Transfer , vol. 15 , no. 6 , pp. 1225 – 1242 , 1972 . [CSA] [CROSSREF]
  • P. J. Banks , Coupled Equilibrium Heat and Single Adsorbate Transfer in Fluid Flow through a Porous Medium—I. Characteristic Potentials and Specific Capacity Ratios, Chem. Eng. Sci. , vol. 27, no. 5, pp. 1143–1155, 1972. [CSA] [CROSSREF]
  • H. Ghezelayagh and D. Gidaspow , Micro-macropore Model for Sorption of Water on Silica Gel in a Dehumidifier , Chem. Eng. Sci. , vol. 37 , no. 8 , pp. 1181 – 1197 , 1982 . [CSA] [CROSSREF]
  • E. Van Den Bulk , J. W. Mitchell , and S. A. Klein , Design Theory for Rotary Heat and Mass Exchangers—I. Wave Analysis of Rotary Heat and Mass Exchangers with Infinite Transfer Coefficients , Int. J. Heat Mass Transfer , vol. 28 , no. 8 , pp. 1575 – 1586 , 1985 . [CSA] [CROSSREF]
  • E. Van Den Bulk , J. W. Mitchell , and S. A. Klein , Design Theory for Rotary Heat and Mass Exchangers—II. Effectiveness-Number-of-Transfer-Units Method for Rotary Heat and Mass Exchangers , Int. J. Heat Mass Transfer , vol. 28 , no. 8 , pp. 1587 – 1595 , 1985 . [CSA] [CROSSREF]
  • E. Van Den Bulk , J. W. Mitchell , and S. A. Klein , The Use of Dehumidifiers in Desiccant Cooling and Dehumidification Systems , ASME J. Heat Transfer , vol. 108 , no. 3 , pp. 684 – 692 , 1986 . [CSA]
  • A. A. Pesaran and A. Mills , Moisture Transport in Silica Gel Packed Beds—I. Theoretical Study , Int. J. Heat Mass Transfer , vol. 30 , no. 6 , pp. 1037 – 1049 , 1987 . [CSA] [CROSSREF]
  • P. Majumdar and W. M. Worek , Performance of an Open-Cycle Desiccant Cooling System Using Advanced Desiccant Matrices , Heat Recovery Syst. CHP , vol. 9 , no. 4 , pp. 299 – 311 , 1989 . [CSA] [CROSSREF]
  • P. Majumdar and W. M. Worek , Combined Heat and Mass Transfer in a Porous Adsorbent , Energy , vol. 14 , no. 3 , pp. 161 – 175 , 1989 . [CSA] [CROSSREF]
  • W. Zheng and W. M. Worek , Numerical Simulation of Combined Heat and Mass Transfer Processes in a Rotary Dehumidifier , Numer. Heat Transfer A , vol. 23 , no. 2 , pp. 211 – 232 , 1993 . [CSA]
  • J. Y. San and S. C. Hsiau , Effect of Axial Solid Heat Conduction and Mass Diffusion in a Rotary Heat and Mass Regenerator , Int. J. Heat Mass Transfer , vol. 36 , no. 8 , pp. 2051 – 2059 , 1993 . [CSA] [CROSSREF]
  • E. E. Chant and S. M. Jeter , On the Use of the Parabolic Concentration Profile Assumption for a Rotary Desiccant Dehumidifier , ASME J. Solar Energy Eng. , vol. 117 , no. 1 , pp. 317 – 322 , 1995 . [CSA]
  • W. Zheng , W. M. Worek , and D. Novosel , Performance Optimization of Rotary Dehumidifiers , ASME J. Solar Energy Eng. , vol. 117 , no. 1 , pp. 40 – 44 , 1995 . [CSA]
  • C. C. Ni and J. Y. San , Mass Diffusion in a Spherical Microporous Particle with Thermal Effect and Gas-Side Mass Transfer Resistance , Int. J. Heat Mass Transfer , vol. 43 , no. 12 , pp. 2129 – 2139 , 2000 . [CSA] [CROSSREF]
  • Y. J. Dai , R. Z. Wang , and H. F. Zhang , Parameter Analysis to Improve Rotary Desiccant Dehumidification Using a Mathematical Model , Int. J. Thermal Sci. , vol. 40 , no. 4 , pp. 400 – 408 , 2001 . [CSA] [CROSSREF]
  • C. Ruivo , A. R. Figueiredo , and J. J. Costa , Simplified Simulation of the Heat and Mass Transfer in a Desiccant Medium Used in Desiccant-Evaporative Cooling System , HPC'01, Proc. Second Int. Heat Powered Cycles Conf. , Paris , 2001 , pp. 473 – 478 .
  • X. J. Zhang , Y. J. Dai , and R. Z. Wang , A Simulation Study of Heat and Mass Transfer in a Honeycomb Rotary Desiccant Dehumidifier , Appl. Thermal Eng. , vol. 23 , no. 8 , pp. 989 – 1003 , 2003 . [CSA] [CROSSREF]
  • M. N. Golubovic and W. M. Worek , Influence of Elevated Pressure on Sorption in Desiccant Wheels , Numer. Heat Transfer A , vol. 45 , no. 9 , pp. 869 – 886 , 2004 . [CSA] [CROSSREF]
  • S. Murali Krishna and S. Srinivasa Murthy , Experiments on Silica Gel Rotary Dehumidifier , Heat Recovery Syst. CHP , vol. 9 , no. 5 , pp. 467 – 473 , 1989 . [CSA] [CROSSREF]
  • A. Kodama , M. Goto , T. Hirose , and T. Kuma , Experimental Study of Optimal Operation for a Honeycomb Adsorber Operated with Thermal Swing , J. Chem. Eng. Jpn. , vol. 26 , no. 5 , pp. 530 – 535 , 1993 . [CSA] [CROSSREF]
  • A. Kodama , M. Goto , T. Hirose , and T. Kuma , Temperature Profile and Optimal Rotation Speed of a Honeycomb Rotor Adsorber Operated with Thermal Swing, J. Chem. Eng. Jpn. , vol. 27, no. 5, pp. 644–649, 1994. [CSA] [CROSSREF]
  • A. Kodama and T. Kuma , Performance Evaluation for a Thermal Swing Honeycomb Rotor Adsorber Using a Humidity Chart , J. Chem. Eng. Jpn. , vol. 28 , no. 1 , pp. 19 – 24 , 1995 . [CSA] [CROSSREF]
  • A. A. Pesaran and A. Mills , Moisture Transport in Silica Gel Packed Beds—II. Experimental Study , Int. J. Heat Mass Transfer , vol. 30 , no. 6 , pp. 1051 – 1060 , 1987 . [CSA] [CROSSREF]
  • K. Schultz , Rotary Solid Desiccant Dehumidifiers—Analysis of Models and Experimental Investigation, Ph.D. thesis , University of Wisconsin , Madison , WI , 1987 .
  • Y. K. Chuah , P. Norton , and F. Kreith , Transient Mass Transfer in Parallel Passage Dehumidifiers with and without Solid Side Resistance , ASME J. Heat Transfer , vol. 111 , no. 4 , pp. 1038 – 1044 , 1989 . [CSA]
  • T. Kravchik , E. Korin , and I. Borde , Influence of Material Properties and Heat Removal on Mass and Heat Transfer in a Solid Desiccant Dehumidifier , Chem. Eng. Process. , vol. 27 , no. 1 , pp. 19 – 25 , 1990 . [CSA] [CROSSREF]
  • E. Van den Bulck , Transient Heat and Mass Transfer in Laminar Flow Forced Convection in Ducts , Int. J. Mass Transfer , vol. 34 , no. 4/5 , pp. 1249 – 1258 , 1991 . [CSA]
  • S. Neti and E. I. Wolfe , Measurements of Effectiveness in a Silica Gel Rotary Exchanger , Appl. Thermal Eng. , vol. 20 , no. 4 , pp. 309 – 322 , 2000 . [CSA] [CROSSREF]
  • J. M. Cejudo , R. Moreno , and A. Carrillo , Physical and Neural Network Models of a Silica-Gel Desiccant Wheel , Energy Buildings , vol. 34 , no. 8 , pp. 837 – 844 , 2002 . [CSA] [CROSSREF]
  • M. H. Ahmed , N. M. Kattab , and M. Fouad , Evaluation and Optimization of Solar Desiccant Wheel Performance , Renewable Energy , vol. 30 , no. 3 , pp. 305 – 325 , 2005 . [CSA] [CROSSREF]
  • T. Lindholm , Desiccant Cooling—A literature Survey , D49:2000, Department of Building Services Engineering, Chalmers University of Techology , Goteborg , Sweden , 2000 .
  • J. L. Niu and L. Z. Zhang , Effects of Wall Thickness on the Heat and Moisture Transfer in Desiccant Wheels for Air Dehumidification and Enthalpy Recovery , Int. Commun. Heat Mass Transfer , vol. 29 , no. 2 , pp. 255 – 268 , 2002 . [CSA] [CROSSREF]
  • L. Z. Zhang and J. L. Niu , Performance Comparisons of Desiccant Wheels for Air Dehumidification and Enthalpy Recovery , Appl. Thermal Eng. , vol. 22 , no. 12 , pp. 1347 – 1367 , 2002 . [CSA] [CROSSREF]
  • L. Z. Zhang and J. L. Niu , A Pre-cooling Munters Environmental Control Desiccant Cooling Cycle in Combination with Chilled-Ceiling Panels , Energy , vol. 28 , no. 3 , pp. 275 – 292 , 2003 . [CSA] [CROSSREF]
  • L. A. Sphaier and W. M. Worek , Analysis of Heat and Mass Transfer in Porous Sorbents Used in Rotary Regenerators , Int. J. Heat Mass Transfer , vol. 47 , no. 14/16 , pp. 3415 – 1430 , 2004 . [CSA] [CROSSREF]
  • Y. Fujii and N. Lior , Conjugate Heat and Mass Transfer in a Desiccant Airflow System: A Numerical Solution Method , Numer. Heat Transfer A , vol. 29 , no. 7 , pp. 689 – 706 , 1996 . [CSA]
  • H. S. Al-Sharqawi and N. Lior , Conjugate Computation of Transient Flow and Heat and Mass Transfer between Humid Air and Desiccant Plates and Channels , Numer. Heat Transfer A , vol. 46 , no. 6 , pp. 525 – 548 , 2004 . [CSA] [CROSSREF]
  • A. Pesaran , Moisture Transport in Silica Gel Particle Beds, Ph.D. thesis , University of California , Los Angeles , CA , 1983 .
  • ASHRAE Handbook, Fundamentals Volume , American Society of Heating, Refrigerating and Air-Conditioning Engineers , Atlanta, GA , 1989 .
  • S. V. Patankar , Numerical Heat Transfer and Fluid Flow , Hemisphere, McGraw-Hill , Washington , DC , 1980 .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.