Publication Cover
Numerical Heat Transfer, Part A: Applications
An International Journal of Computation and Methodology
Volume 55, 2009 - Issue 5
277
Views
20
CrossRef citations to date
0
Altmetric
Original Articles

Numerical Study of Thermal and Hydraulic Performance of Compound Heat Sink

&
Pages 432-447 | Received 12 May 2008, Accepted 10 Jan 2009, Published online: 06 Mar 2009

REFERENCES

  • Y. M. Chung and K. H. Luo , Unsteady Heat Transfer Analysis of an Impinging Jet , J. Heat Transfer , vol. 124 , pp. 1039 – 1048 , 2002 .
  • K. Nishino , M. Samada , K. Kasuya , and K. Torii , Turbulence Statistics in the Stagnation Region of an Axisymmetric Impinging Jet Flow , Int. J. Heat Fluid Flow , vol. 17 , pp. 193 – 201 , 1996 .
  • K. S. Kim , M. H. Won , J. W. Kim , and B. J. Back , Heat Pipe Cooling Technology for Desktop PC CPU , Appl. Therm. Eng. , vol. 23 , pp. 1137 – 1144 , 2003 .
  • Y. Wang and K. Vafai , An Experimental Investigation of the Thermal Performance of an Asymmetrical Flat Plate Heat Pipe , Int. J. Heat Mass Transfer , vol. 43 , pp. 2657 – 2668 , 2000 .
  • Z. Zhao and C. T. Avedisian , Enhancing Forced Air Convection Heat Transfer from an Array of Parallel Plate Fins Using a Heat Pipe , Int. J. Heat Mass Transfer , vol. 40 , no. 13 , pp. 3135 – 3147 , 1997 .
  • D. Niculin , M. Strelets , A. Dvinsky , and A. Bar-Cohen , Navier-Stokes Study of Natural Convection and Heat Transfer in Vertical Symmetrically Heated Plate-Fin Heat Sinks , Numer. Heat Transfer A , vol. 30 , no. 7 , pp. 703 – 720 , 1996 .
  • G. Ledezma , A. M. Morega , and A. Bejan , Optimal Spacing between Pin Fins with Impinging Flow , J. of Heat Transfer , vol. 118 , pp. 570 – 577 , 1996 .
  • L. A. Brignoni and S. V. Garimella , Experimental Optimization of Confined Air Jet Impingement on a Pin Fin Heat Sink , IEEE Trans. Compon. Packaging Technol. , vol. 22 , no. 3 , pp. 399 – 404 , 1999 .
  • J. G. Maveety and J. F. Hendricks , A Heat Sink Performance Study Considering Material, Geometry, Reynolds Number with Air Impingement , J. Electron. Packag. , vol. 121 , pp. 156 – 161 , 1999 .
  • J. G. Maveety and H. H. Jung , Design of an Optimal Pin-Fin Heat Sink with Air Impingement Cooling , Int. Commun. Heat Mass Transfer , vol. 27 , no. 2 , pp. 229 – 240 , 2000 .
  • H. Jonsson and B. Palm , Thermal and Hydraulic Behavior of Plate Fin and Strip Fin Heat Sinks under Varying Bypass Conditions, IEEE Trans. Compon. Packaging Technol. , vol. 23, no. 1, pp. 47–54, 2000.
  • H. Jonsson and B. Moshfegh , Modeling of the Thermal and Hydraulic Performance of Plate Fin, Strip Fin, and Pin Fin Heat Sinks-Influence of Flow Bypass , IEEE Trans. Compon. Packaging Technol. , vol. 24 , no. 2 , pp. 142 – 149 , 2001 .
  • H. Wee , Q. Zhang , P. M. Ligrani , and S. Narasimhan , Numerical Predictions of Heat Transfer and Flow Characteristics of Heat Sinks with Ribbed and Dimpled Surfaces in Laminar Flow , Numer. Heat Transfer A , vol. 53 , no. 11 , pp. 1156 – 1175 , 2008 .
  • J. J. Hwang and C. C. Lui , Detailed Heat Transfer Characteristic Comparison in Straight and 90° Turned Trapezoidal Ducts with Pin-Fin Arrays , Int. J. Heat Mass Transfer , vol. 42 , pp. 4005 – 4016 , 1999 .
  • J. J. Hwang and C. C. Lui , Measurement of End Wall Heat Transfer and Pressure Drop in a Pin-Fin Wedge Duct , Int. J. Heat Mass Transfer , vol. 45 , pp. 877 – 889 , 2002 .
  • A. Horvat and I. Catton , Application of Galerkin Method to Conjugate Heat Transfer Calculation , Numer. Heat Transfer B , vol. 44 , no. 6 , pp. 509 – 531 , 2003 .
  • K. Park , D.-H. Choi , and K.-S. Lee , Numerical Shape Optimization for High Performance of a Heat Sink with Pin-Fins , Numer. Heat Transfer A , vol. 46 , no. 9 , pp. 909 – 927 , 2004 .
  • E. Sansoucy , P. H. Oosthuizen , and G. R. Ahmed , An Experimental Study of the Enhancement of Air-Cooling Limits for Telecom/Datacom Heat Sink Applications Using an Impinging Air Jet , J. Electron. Packag. , vol. 128 , pp. 166 – 171 , 2006 .
  • K. T. Chiang and F. P. Chang , Application of Response Surface Methodology in the Parametric Optimization of a Pin-Fin Type Heat Sink , Int. Commun. Heat Mass Transfer , vol. 33 , pp. 836 – 845 , 2006 .
  • K. T. Chiang , F. P. Chang , and T. C. Tsai , Optimum Design Parameters of Pin-Fin Heat Sink Using the Grey-Fuzzy Logic Based on the Orthogonal Arrays , Int. Commun. Heat Mass Transfer , vol. 33 , pp. 744 – 752 , 2006 .
  • H. Y. Li , S. M Chao , and G. L. Tsai , Thermal Performance Measurement of Heat Sinks with Confined Impinging Jet by Infrared Thermography , Int. J. Heat Mass Transfer , vol. 48 , pp. 5386 – 5394 , 2005 .
  • H. Y. Li and K. Y. Chen , Thermal Performance of Plate-Fin Heat Sinks under Confined Impinging Jet Conditions , Int. J. Heat Mass Transfer , vol. 50 , pp. 1963 – 1970 , 2007 .
  • K. K. Ambatipudi and M. M. Rahman , Analysis of Conjugate Heat Transfer in Microchannel Heat Sinks , Numer. Heat Transfer A , vol. 37 , no. 7 , pp. 711 – 731 , 2000 .
  • E. Y. K. Ng and S. T. Poh , CFD Analysis of Double-Layer Microchannel Conjugate Parallel Liquid Flows with Electric Double-Layer Effects , Numer. Heat Transfer A , vol. 40 , no. 7 , pp. 735 – 749 , 2001 .
  • C. J. Kobus and T. Oshio , Development of a Theoretical Model for Predicting the Thermal Performance Characteristics of a Vertical Pin-fin Array Heat Sink under Combined Forced and Natural Convection , Int. J. Heat Mass Transfer , vol. 48 , pp. 1053 – 1063 , 2005 .
  • P. Payvar , Free Convection in a Vertical Duct of Square Cross Section with Variable Viscosity , Numer. Heat Transfer A , vol. 23 , no. 2 , pp. 247 – 258 , 1993 .
  • C. J. Kobus and T. Oshio , Predicting the Thermal Performance Characteristics of Staggered Vertical Pin Fin Array Heat Sinks under Combined Mode Radiation and Mixed Convection with Impinging Flow , Int. J. Heat Mass Transfer , vol. 48 , pp. 2684 – 2696 , 2005 .
  • G. P. Peterson and C. S. Chang , Heat Transfer Analysis and Evaluation for Two-Phase Flow in Porous-Channel Heat Sinks , Numer. Heat Transfer A , vol. 31 , no. 2 , pp. 113 – 130 , 1997 .
  • M. Tye-Gingras and L. Gosselin , Thermal Resistance Minimization of a Fin-and-Porous-Medium Heat Sink with Evolutionary Algorithms, Numer. Heat Transfer A , vol. 54, no. 4, pp. 349–366, 2008.
  • W.-L. Chen and Y.-C. Yang , Estimation of the Transient Heat Transfer Rate at the Boundary of an Electronic Chip Packaging , Numer. Heat Transfer A , vol. 54 , no. 10 , pp. 945 – 961 , 2008 .
  • S. Y. Kim , J.-M. Koo , and A. V. Kuznetsov , Effect of Anisotropy in Permeability and Effective Thermal Conductivity on Thermal Performance of an Aluminum Foam Heat Sink , Numer. Heat Transfer A , vol. 40 , no. 1 , pp. 21 – 36 , 2001 .
  • S. Y. Kim and A. V. Kuznetsov , Optimization of Pin-Fin Heat Sinks Using Anisotropic Local Thermal Nonequilibrium Porous Model in a Jet Impinging Channel , Numer. Heat Transfer A , vol. 44 , no. 8 , pp. 771 – 787 , 2003 .
  • G. Lorenzini and S. Moretti , Numerical Analysis on Heat Removal from Y-shaped Fins: Efficiency and Volume Occupied for a New Approach to Performance Optimisation , Int. J. Therm. Sci. , vol. 46 , pp. 573 – 579 , 2007 .
  • G. Ledezma and A. Bejan , Heat Sinks with Sloped Plate Fins in Natural and Forced Convection , Int. J. Heat Mass Transfer , vol. 39 , no. 9 , pp. 1773 – 1783 , 1996 .
  • S. B. Sathe and B. G. Sammakia , An Analytical Study of the Optimized Performance of an Impingement Heat Sink , J. Electron. Packag. , vol. 126 , pp. 528 – 534 , 2004 .
  • A. Shah , B. G. Sammakia , H. Srihari , and K. Ramakrishna , A Numerical Study of the Thermal Performance of an Impingement Heat Sink-Fin Shape Optimization , IEEE Trans. Compon. Packaging Technol. , vol. 27 , no. 4 , pp. 710 – 717 , 2004 .
  • A. Shah , B. G. Sammakia , K. Srihari , and K. Ramakrishna , Optimization Study for a Parallel Plate Impingement Heat Sink , J. Electron. Packag. , vol. 128 , pp. 311 – 318 , 2006 .
  • X. L. Yu , Q. K. Feng , and Q. P. Liu , Research on the Heat Transfer and Flow Performance of a Composite Heat Sink , Journal of Xi'an Jiaotong University , vol. 37 , no. 4 , pp. 670 – 673 ( in Chinese ), 2003 .
  • X. L. Yu , Q. K. Feng , and J. M. Feng , Research on Thermal Performance of Plate-Pin Fin Heat Sink , Journal of Xi'an Jiaotong University , vol. 38 , no. 11 , pp. 1114 – 1118 ( in Chinese ), 2004 .
  • X. L. Yu , J. M. Feng , Q. K. Feng , and Q. W. Wang , Development of a Plate-Pin Fin Heat Sink and Its Performance Comparisons with a Plate Fin Heat Sink , Appl. Therm. Eng. , vol. 25 , pp. 173 – 182 , 2005 .
  • Y. H. Zhao , C. X. Chai , and Z. M. Luo , Numerical Simulation Study on Heat Transfer Characteristics of Plate-Pin Fin Oil Cooler , Design & Manufacture of Diesel Engine , vol. 14 , no. 4 , pp. 13 – 15 ( in Chinese ), 2005 .
  • E. M. Sparrow , J. W. Ramsey , and C. A. C. Altemani , Experiments on In-line Pin Fin Arrays and Performance Comparisons with Staggered Arrays , J. Heat Transfer , vol. 102 , pp. 44 – 50 , 1980 .
  • J. P. Van Doormaal and F. D. Raithby , Enhancements of the SIMPLE Method for Predicting Incompressible Fluid Flows , Numer. Heat Transfer A , vol. 7 , pp. 147 – 163 , 1984 .
  • S. V. Patankar , Numerical Heat Transfer and Fluid Flow , McGraw-Hill , New York , 1980 .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.