Finite volume-based simulation of the wave soldering process: Influence of the conveyor angle on pin-through-hole capillary flow

References

• IPC-A-610D, Acceptability of Electronic Assemblies, in Through-Hole Technology, chap. 7, pp. 39–40, Association Connecting Electronic Industries (IPC), Bannockburn, IL, 2005.
   Google Scholar
• M. S. Abdul Aziz, M. Z. Abdullah, C. Y. Khor, Z. M. Fairuz, A. M. Iqbal, M. Mazlan, and M. S. Mat Rasat, Thermal Fluid-Structure Interaction in the Effects of Pin-Through-Hole Diameter During Wave Soldering, Adv. Mech. Eng., vol. 2014, pp. 1–13, 2014.
   Google Scholar
• M. S. Abdul Aziz, M. Z. Abdullah, C. Y. Khor, A. M. Iqbal, and F. Che Ani, CFD Modeling of Pin Shape Effects on Capillary Flow During Wave Soldering, Int. J. Heat Mass Transfer, vol. 72, pp. 400–410, 2014.
   Web of Science ®Google Scholar
• M. S. Abdul Aziz, M. Z. Abdullah, C. Y. Khor, and F. Che Ani, Influence of Pin Offset in PCB Through-Hole During Wave Soldering Process: CFD Modeling Approach, Int. Commun. Heat Mass Transfer, vol. 48, pp. 116–123, 2013.
   Web of Science ®Google Scholar
• C. Y. Khor, M. Z. Abdullah, Z. M. Ariff, and W. C Leong, Effect of Stacking Chips and Inlet Positions on the Void Formation in the Encapsulation of 3D Stacked Flip-Chip Package, Int. Commun. Heat Mass Transfer, vol. 39, pp. 670–680, 2012.
   Web of Science ®Google Scholar
• J. W. Wan, W. J. Zhang, and D. Bergstrom, Numerical Modeling for the Underfill Flow in Flip-Chip Packaging, IEEE Trans. Adv. Electron. Packag., vol. 32, no. 2, 2009.
   Google Scholar
• T. Hashimoto, T. Shin-ichiro, K. Morinishi, and N. Satofuka, Numerical Simulation of Conventional Capillary Flow and No-Flow Underfill in Flip Chip Packaging, Comput. Fluids, vol. 37, pp. 520–523, 2008.
   Web of Science ®Google Scholar
• S.-Y. Teng and S.-J. Hwang, Simulations and Experiments of Three-Dimensional Paddle Shift for IC Packaging, Microelectron. Eng., vol. 85, no. 1, pp. 115–125, 2008.
   Web of Science ®Google Scholar
• C. S. Lau, M. Z. Abdullah, and C. Y. Khor, Optimization of the Reflow Soldering Process with Multiple Quality Characteristics in Ball Grid Array Packaging by using the Grey-Based Taguchi Method, Microelectron. Int., vol. 30, no. 3, pp. 151–168, 2013.
   Web of Science ®Google Scholar
• I. Baylakoglu, S. Hamarat, H. Gokmen, and E. Meric, Case Study for High Volume Lead-Free Wave Soldering Process with Environmental Benefits, ISEE 2005, Proceedings of the International Symposium on Electronics and the Environment, pp. 102–106, 2005.
   Google Scholar
• M. Liukkonen, E. Havia, H. Leinonen, and Y. Hiltunen, Application of Self-Organizing Maps in Analysis of Wave Soldering Process, Expert Syst. Appl., vol. 36, no. 3, pp. 4604–4609, 2009.
   Web of Science ®Google Scholar
• M. Liukkonen, E. Havia, H. Leinonen, and Y. Hiltunen, Quality-Oriented Optimization of Wave Soldering Process by using Self-Organizing Maps, Appl. Soft Comput., vol. 11, no. 1, pp. 214–220, 2011.
   Web of Science ®Google Scholar
• M. Arra, D. Shangguan, S. Yi, R. Thalhammer, and H. Fockenberger, Development of Lead-free Wave Soldering Process, IEEE Trans. Electron. Packag. Manuf., vol. 25, no. 4, pp. 289–299, 2002.
   Web of Science ®Google Scholar
• C. Fu and C. Ume, Characterizing the Temperature Dependence of Electronic Packaging Material Properties, J. Miner. Mater. Met., vol. 47, no. 6, pp. 31–35, 1995.
   Web of Science ®Google Scholar
• K. Suganuma, M. Ueshima, I. Ohnaka, H. Yasuda, J. Zhu, and T. Matsuda, Lift-off Phenomenon in Wave Soldering, Acta Materiala, vol. 48, no. 18–19, pp. 4475–4481, 2000.
   Web of Science ®Google Scholar
• K. Franken, H. R. Maier, K. Prume, and R. Waser, Finite Element Analysis of Ceramic Multilayer Capacitors: Failure Probability Caused by Wave Soldering and Bending Loads, J. Am. Ceram. Soc., vol. 83, no. 6, pp. 1433–1440, 2000.
   Web of Science ®Google Scholar
• M. S. Abdul Aziz, M. Z. Abdullah, and C. Y. Khor, Influence of PTH Offset Angle in Wave Soldering with Thermal-Coupling Method, Soldering Surf. Mount Technol., vol. 26, no. 3, pp. 97–109, 2014.
   Web of Science ®Google Scholar
• C. Y. Khor, M. Z. Abdullah, and W. C. Leong, Fluid/Structure Interaction Analysis on the Solder Bump Shapes and I/O’s Count Effects in Moulded Packaging, IEEE Trans. Compon. Packag. Manuf. Technol., vol. 2, no. 4, pp. 604–616, 2012.
   Web of Science ®Google Scholar
• K. Dušek and J. Urbánek, Surface Tension Measurement of the Solders by Non-Wetting Specimen, Manufacturing Processes, Process Simul. Optim, pp. 354–357, 2008.
   Google Scholar