Film cooling from a cylindrical hole with parallel auxiliary holes influences

Reference

• R. J. Goldstein Film Cooling, Adv. Heat Transfer, vol. 7, pp. 321–379, 1971.
   Google Scholar
• K.-D. Lee and K.-Y. Kim Film Cooling Performance of Cylindrical Holes Embedded in a Transverse Trench, Numer. Heat Transfer A, vol. 65, pp. 127–143, 2014.
   Web of Science ®Google Scholar
• S. Ekkad and J.-C. Han A Review on Hole Geometry and Coolant Density Effect on Film Cooling, Proceedings of the ASME 2013 Heat Transfer Summer Conference, HT2013–17250, Minneapolis, Minnesota, 2013.
   Google Scholar
• M. J. Ely and B. A. Jubran A Numerical Study on Improving Large Angle Film Cooling Performance Through the Use of Sister Holes, Numer. Heat Transfer A, vol. 55, pp. 634–653, 2009.
   Web of Science ®Google Scholar
• D. R. Pedersen, E. R. G. Eckert, and R. J. Goldstein Film Cooling With Large Density Differences Between Mainstream and the Secondary Fluid Measured by the Heat-Mass Transfer Analogy, ASME J. Heat Transfer, vol. 99, pp. 620–627, 1977.
   Web of Science ®Google Scholar
• R. J. Goldstein, E. R. G. Eckert, and F. Burggraf Effects of Hole Geometry and Density on Three-Dimensional Film Cooling, Int. J. Heat Mass Transfer, vol. 17, pp. 595–607, 1974.
   Web of Science ®Google Scholar
• K. Thole, M. Gritsch, A. Schulz, and S. Wittig, Flow Field Measurements for Film-Cooling Holes with Expanded Exits. ASME J. Turbomach., vol. 120, pp. 327–336, 1998.
   Web of Science ®Google Scholar
• K.-D. Lee and K.-Y. Kim Surrogate Based Optimization of a Laidback Fan-Shaped Hole for Film-Cooling, Int. J. Heat Fluid Flow, vol. 32, pp. 226–238, 2011.
   Web of Science ®Google Scholar
• R. S. Bunker A Review of Shaped Hole Turbine Film-Cooling Technology, J. Heat Transf., vol. 127, pp. 441–453, 2005.
   Web of Science ®Google Scholar
• A. Dhungel, Y. Lu, W. Philips, S. Ekkad, and J. Heidmann, Film Cooling from a Row of Holes Supplemented with Antivortex Holes, ASME J. Turbomach, vol. 131, p. 021007, 2009.
   Google Scholar
• C. Leblanc, D. Narzary, S. V. Ekkad, Film Cooling Performance of an Antivortex Hole on a Flat Plate, AJTEC2011–44161, 2011 AJTEC, Hawaii, 2011.
   Google Scholar
• M. K. K. Soe, D. S. Ting, W. Hong, Analysis of Film Cooling Effectiveness on Antivortex Hole, 2011 International Conference on Consumer Electronics, Communications and Networks, pp. 4763–4766, Xian Ning, China, 2011.
   Google Scholar
• M. Ely, B. A. Jubran A Numerical Evaluation on the Effect of Sister Holes on Film Cooling Effectiveness and the Surrounding Flow Field, Heat Mass Transfer, vol. 45, pp. 1435–1446, 2009.
   Web of Science ®Google Scholar
• S. Khajehhasani and B. A. Jubran Film Cooling from Circular and Elliptical Exit Shaped Holes with Sister Hole Influence, Proceedings of ASME Turbo Expo 2013, San Antonio, TX, GT2013–95138, 2013.
   Google Scholar
• D. L. Schmidt, B. Sen, and D. G. Bogard Film Cooling with Compound Angle Holes: Adiabatic Effectiveness, ASME J. Turbomach., vol. 118, pp. 807–813, 1996.
   Web of Science ®Google Scholar
• D. K. Walters and J. H. Leylek Impact of Film-Cooling Jets on Turbine Aerodynamic Losses, ASME J. Turbomach., vol. 122, pp. 537–545, 2000.
   Web of Science ®Google Scholar
• M. Sillieti, A. J. Kassab, and E. Divo, Film Cooling Effectiveness from a Single Scaled-up Fan-Shaped Hole-A CFD Simulation of Adiabatic and Conjugate Heat Transfer Models, ASME Turbo Expo, Gas Turbie Technology: Focus for the Future, Paper GT 2005–68431, RenoTahoe, USA, 2005.
   Google Scholar
• C.-L. Liu, H.-R. Zhu, and J.-T. Bai New Development of the Turbulent Prandtl Number Models for the Computation of Film Cooling Effectiveness, Int. J. Heat Mass Transfer, vol. 54, pp. 874–886, 2011.
   Web of Science ®Google Scholar
• A. K. Sinha, D. G. Bogard, M. E. Crawford, Film-Cooling Effectiveness Downstream of a Single Row of Holes With Variable Density Ratio, ASME J. Turbomach., vol. 113, pp. 442–449, 1991.
   Web of Science ®Google Scholar
• B. An, J. Liu, C. Zhang, S. Zhou Film Cooling of Cylindrical Hole With a Downstream Short Crescent-Shaped Block, ASME J. Turbomach., vol. 135, p. 031702, 2013.
   Google Scholar
• Y. Shan and J.-Z. Zhang Numerical Investigation on Film Cooling Characteristics from a Row of Holes with Rigde-Shaped Tabs, J. Enhanc. Heat Transfer, vol. 20, pp. 251–265, 2013.
   Web of Science ®Google Scholar
• S. V. Ekkad, D. Zapata, and J. C. Han Film Effectiveness Over a Flat Surface with Air and CO2 Injection Through Compound Angle Holes Using a Transient Liquid Crystal Image Method, ASME J. Turbomach., vol. 119, pp. 587–593, 1997.
   Web of Science ®Google Scholar
• B. Sen, D. L. Schmidt, and D. G. Bogard Film Cooling with Compound Angle Holes: Heat Transfer, ASME J. Turbomach., vol. 118, pp. 800–806, 1996.
   Web of Science ®Google Scholar
• S. P. Chen, M. K. Chyu, and T. I.-P. Shih Effects of Upstream Ramp on the Performance of Film Cooling, Int. J. Therm. Sci., vol. 50, pp. 1085–1094, 2011.
   Web of Science ®Google Scholar