Reference
- R. J. Goldstein Film Cooling, Adv. Heat Transfer, vol. 7, pp. 321–379, 1971.
- K.-D. Lee and K.-Y. Kim Film Cooling Performance of Cylindrical Holes Embedded in a Transverse Trench, Numer. Heat Transfer A, vol. 65, pp. 127–143, 2014.
- S. Ekkad and J.-C. Han A Review on Hole Geometry and Coolant Density Effect on Film Cooling, Proceedings of the ASME 2013 Heat Transfer Summer Conference, HT2013–17250, Minneapolis, Minnesota, 2013.
- M. J. Ely and B. A. Jubran A Numerical Study on Improving Large Angle Film Cooling Performance Through the Use of Sister Holes, Numer. Heat Transfer A, vol. 55, pp. 634–653, 2009.
- D. R. Pedersen, E. R. G. Eckert, and R. J. Goldstein Film Cooling With Large Density Differences Between Mainstream and the Secondary Fluid Measured by the Heat-Mass Transfer Analogy, ASME J. Heat Transfer, vol. 99, pp. 620–627, 1977.
- R. J. Goldstein, E. R. G. Eckert, and F. Burggraf Effects of Hole Geometry and Density on Three-Dimensional Film Cooling, Int. J. Heat Mass Transfer, vol. 17, pp. 595–607, 1974.
- K. Thole, M. Gritsch, A. Schulz, and S. Wittig, Flow Field Measurements for Film-Cooling Holes with Expanded Exits. ASME J. Turbomach., vol. 120, pp. 327–336, 1998.
- K.-D. Lee and K.-Y. Kim Surrogate Based Optimization of a Laidback Fan-Shaped Hole for Film-Cooling, Int. J. Heat Fluid Flow, vol. 32, pp. 226–238, 2011.
- R. S. Bunker A Review of Shaped Hole Turbine Film-Cooling Technology, J. Heat Transf., vol. 127, pp. 441–453, 2005.
- A. Dhungel, Y. Lu, W. Philips, S. Ekkad, and J. Heidmann, Film Cooling from a Row of Holes Supplemented with Antivortex Holes, ASME J. Turbomach, vol. 131, p. 021007, 2009.
- C. Leblanc, D. Narzary, S. V. Ekkad, Film Cooling Performance of an Antivortex Hole on a Flat Plate, AJTEC2011–44161, 2011 AJTEC, Hawaii, 2011.
- M. K. K. Soe, D. S. Ting, W. Hong, Analysis of Film Cooling Effectiveness on Antivortex Hole, 2011 International Conference on Consumer Electronics, Communications and Networks, pp. 4763–4766, Xian Ning, China, 2011.
- M. Ely, B. A. Jubran A Numerical Evaluation on the Effect of Sister Holes on Film Cooling Effectiveness and the Surrounding Flow Field, Heat Mass Transfer, vol. 45, pp. 1435–1446, 2009.
- S. Khajehhasani and B. A. Jubran Film Cooling from Circular and Elliptical Exit Shaped Holes with Sister Hole Influence, Proceedings of ASME Turbo Expo 2013, San Antonio, TX, GT2013–95138, 2013.
- D. L. Schmidt, B. Sen, and D. G. Bogard Film Cooling with Compound Angle Holes: Adiabatic Effectiveness, ASME J. Turbomach., vol. 118, pp. 807–813, 1996.
- D. K. Walters and J. H. Leylek Impact of Film-Cooling Jets on Turbine Aerodynamic Losses, ASME J. Turbomach., vol. 122, pp. 537–545, 2000.
- M. Sillieti, A. J. Kassab, and E. Divo, Film Cooling Effectiveness from a Single Scaled-up Fan-Shaped Hole-A CFD Simulation of Adiabatic and Conjugate Heat Transfer Models, ASME Turbo Expo, Gas Turbie Technology: Focus for the Future, Paper GT 2005–68431, RenoTahoe, USA, 2005.
- C.-L. Liu, H.-R. Zhu, and J.-T. Bai New Development of the Turbulent Prandtl Number Models for the Computation of Film Cooling Effectiveness, Int. J. Heat Mass Transfer, vol. 54, pp. 874–886, 2011.
- A. K. Sinha, D. G. Bogard, M. E. Crawford, Film-Cooling Effectiveness Downstream of a Single Row of Holes With Variable Density Ratio, ASME J. Turbomach., vol. 113, pp. 442–449, 1991.
- B. An, J. Liu, C. Zhang, S. Zhou Film Cooling of Cylindrical Hole With a Downstream Short Crescent-Shaped Block, ASME J. Turbomach., vol. 135, p. 031702, 2013.
- Y. Shan and J.-Z. Zhang Numerical Investigation on Film Cooling Characteristics from a Row of Holes with Rigde-Shaped Tabs, J. Enhanc. Heat Transfer, vol. 20, pp. 251–265, 2013.
- S. V. Ekkad, D. Zapata, and J. C. Han Film Effectiveness Over a Flat Surface with Air and CO2 Injection Through Compound Angle Holes Using a Transient Liquid Crystal Image Method, ASME J. Turbomach., vol. 119, pp. 587–593, 1997.
- B. Sen, D. L. Schmidt, and D. G. Bogard Film Cooling with Compound Angle Holes: Heat Transfer, ASME J. Turbomach., vol. 118, pp. 800–806, 1996.
- S. P. Chen, M. K. Chyu, and T. I.-P. Shih Effects of Upstream Ramp on the Performance of Film Cooling, Int. J. Therm. Sci., vol. 50, pp. 1085–1094, 2011.