Numerical simulations and optimization of porous pin fins in a rectangular channel

References

• P. X. Jiang, M. Li, T. J. Lu, L. Yu, and Z. P. Ren, Experimental Research on Convection Heat Transfer in Sintered Porous Plate Channels, Int. J. Heat Mass Transfer, vol. 47, pp. 2085–2096, 2004.
   Web of Science ®Google Scholar
• O. A. Plumb and J. C. Huenefled, Non-Darcy Natural Convection from Heated Surfaces in Saturated Porous Media, Int. J. Heat Mass Transfer, vol. 24, pp. 765–768, 1981.
   Web of Science ®Google Scholar
• K. Vafai and C. L. Tien, Boundary, and Inertia Effects on Flow, and Heat Transfer in Porous Media, Int. J. Heat Mass Transfer, vol. 24, pp. 195–203, 1981.
   Web of Science ®Google Scholar
• C. T. Hsu and P. Cheng, The Brinkman Model for Natural Convection about a Semi-Infinite Vertical Plate in a Porous Medium, Int. J. Heat Mass Transfer, vol. 28, pp. 683–697, 1985.
   Web of Science ®Google Scholar
• R. F. Benenati and C. B. Brosilow, Void Fraction Distribution in Beds of Spheres, AICHE J., vol. 8, pp. 359–361, 1987.
   Web of Science ®Google Scholar
• P. Cheng, Thermal Dispersion Effects in Non-Darcian Convective Flow in a Saturated Porous Medium, Lett. Heat Mass Transfer, vol. 8, pp. 267–270, 1981.
   Web of Science ®Google Scholar
• O. A. Plumb, The Effect of Thermal Dispersion on Heat Transfer in Packed Bed Boundary Layers, ASME-JSME Joint Therm. Conf. Proc., vol. 2, pp. 17–21, 1983.
   Google Scholar
• J. F. Hong and C. L. Tien, Analysis of Thermal Dispersion Effect on Vertical-Plate Nature Convection in Porous Media, Int. J. Heat Mass Transfer, vol. 30, pp. 143–150, 1987.
   Web of Science ®Google Scholar
• L. H. S. Roblee, R. M. Baird, and J. W. Tierney, Radial Porosity Variations in Packed Beds, AICHE J., vol. 4, pp. 460–464, 1958.
   Web of Science ®Google Scholar
• C. E. Schwartz and J. M. Smith, Flow Distribution in Packed Beds, Indust. Eng. Chem., vol. 45, pp. 1209–1218, 1952.
   Web of Science ®Google Scholar
• P. Cheng, A. Chowdhury, and C. T. Hsu Forced Convection in Packed Tubes and Channels with Variable Porosity and Thermal Dispersion Effects, in S. KaKa et al. (eds.), Convective Heat Mass Transfer in Porous Media, pp. 625–653, 1991.
   Google Scholar
• P. Bogdan, I. Mohamad, and A. Abdulmajeed, An Experimental, and Numerical Study on Heat Transfer Enhancement for Gas Heat Exchangers Fitted with Porous Media, Int. J. Heat Mass Transfer, vol. 47, pp. 4939–4952, 2004.
   Web of Science ®Google Scholar
• A. Narasimhan, J. L. Lage, D. A. Nield, and D. C. Porneala, Experimental Verification of Two New Theories Predicting Temperature-Dependent Viscosity Effects on the Forced Convection in a Porous Channel, ASME J. Heat Transfer, vol. 123, pp. 948–951, 2001.
   Google Scholar
• A. Narasimhan, J. L. Lage, and D. Nield, A New Theory for Forced Convection Through Porous Media by Fluids with Temperature-Dependent Viscosity, ASME J. Heat Transfer, vol. 123, pp. 1045–1051, 2001.
   Web of Science ®Google Scholar
• A. Hadim, Forced Convection in a Porous Channel with Localized Heat Sources, ASME J. Heat Transfer, vol. 116, pp. 465–472, 1994.
   Web of Science ®Google Scholar
• A. Hadim and A. Bethancourt, Numerical Study of Forced Convection in a Partially Porous Channel with Discrete Heat Sources, ASME J. Electron. Packag., vol. 117, pp. 46–51, 1995.
   Web of Science ®Google Scholar
• K. H. Ko and N. K. Anand, Use of Porous Baffles to Enhance Heat Transfer in a Rectangular Channel, Int. J. Heat Mass Transfer, vol. 46, pp. 4191–4199, 2003.
   Web of Science ®Google Scholar
• P. Sathyamurthy and P. W. Runstadler, Numerical, and Experimental Evaluation of Planar, and Staggered Heat Sinks, Inter Society Conference on Thermal Phenomena, vol. 5, pp. 132–139, 1996.
   Google Scholar
• Y. T. Yang and C. Z. Hwang, Calculation of Turbulent Flow, and Heat Transfer in a Porous-Baffled Channel, Int. J. Heat Mass Transfer, vol. 46, pp. 771–780, 2003.
   Web of Science ®Google Scholar
• F. Zhou and I. Catton, Numerical Evaluation of Flow, and Heat Transfer in Plate-Pin Fin Heat Sinks with Various Pin Cross-Sections, Numer. Heat Transfer Part A: Appl., vol. 60, pp. 107–128, 2011.
   Web of Science ®Google Scholar
• N. Sahiti, A. Lemouedda, D. Stojkovic, F. Durst, and E. Franz, Performance Comparison of Pin Fin in-Duct Flow Arrays with Various Pin Cross-Sections, Appl. Therm. Eng., vol. 26, pp. 1176–1192, 2006.
   Web of Science ®Google Scholar
• R. V. Rao and V. K. Patel, Thermodynamic Optimization of Cross Flow Plate-Fin Heat Exchanger Using a Particle Swarm Optimization Algorithm, Int. J. Therm. Sci., vol. 49, pp. 1712–1721, 2010.
   Web of Science ®Google Scholar
• S. W. Chang, L. M. Su, T. L. Yang, and S. F. Chiou, Enhanced Heat Transfer of Forced Convective Fin Flow with Transverse Ribs, Int. J. Therm. Sci., vol. 43, pp. 185–200, 2004.
   Google Scholar
• J. Yang, M. Zeng, Q. W. Wang, and A. Nakayama, Forced Convection Heat Transfer Enhancement by Porous Pin Fins in Rectangular Channels, ASME J. Heat transfer, vol. 132, 2010. [Art. no.051702].
   PubMed Web of Science ®Google Scholar
• F. Zhou and I. Catton, Numerical Evaluation of Flow, and Heat Transfer in Plate-Pin Fin Heat Sinks with Various Cross-Sections, Numer. Heat Transfer, Part A: Appl., vol. 60, no. 2, pp. 107–128, 2011.
   Web of Science ®Google Scholar
• L. Z. Zhang, W. C. Zhong, J. M. Chen, and J. R. Zhou, Fluid Flow, and Heat Transfer in Plate-Fin, and Tube Heat Exchangers in a Transitional Flow Regime, Numer. Heat Transfer, Part A: Appl., vol. 60, no. 9, pp. 766–784, 2011.
   Web of Science ®Google Scholar
• L. C. Wang, M. Su, W. L. Hu, Z. M. Lin, L. B. Wang, and Y. Wang, The Characteristic Temperature in the Definition of Heat Transfer Coefficient on the Fin Side Surface in Tube Bank Fin Heat Exchanger, Numer. Heat Transfer, Part A: Appl., vol. 60, no. 10, pp. 848–866, 2011.
   Web of Science ®Google Scholar
• A. Azimi, K. Bamdad, and H. Ahmadikia, Inverse Hyperbolic Heat Conduction in Fins with Arbitrary Profiles, Numer. Heat Transfer, Part A: Appl., vol. 61, no. 3, pp. 220–240, 2012.
   Web of Science ®Google Scholar
• R. Das and P. P. Dutta, Application of Simulated Annealing for Simultaneous Estimation of Parameters in a Cylindrical Fin, Numer. Heat Transfer, Part A: Appl., vol. 61, no. 9, pp. 699–716, 2012.
   Web of Science ®Google Scholar
• M. R. Shaeri and T. C. Jen, Turbulent Heat Transfer Analysis of a Three-Dimensional Array of Perorated Fins Due to Changes in Perforation Sizes, Numer. Heat Transfer, Part A: Appl., vol. 61, no. 11, pp. 807–822, 2012.
   Web of Science ®Google Scholar
• J. F. Fan, W. K. Ding, Y. L. He, and W. Q. Tao, Three-Dimensional Numerical Study of Fluid, and Heat Transfer Characteristics of Dimpled Fin Surfaces, Numer. Heat Transfer, Part A: Appl., vol. 62, no. 4, pp. 271–294, 2012.
   Web of Science ®Google Scholar
• C. C. Wang, W. J. Liao, and C. Y. Yang, Hybrid Spline Difference Method for Heat Transfer, and Thermal Stresses in Annular Fins, Numer. Heat Transfer, Part B: Fundam., vol. 64, no. 1, pp. 71–88, 2013.
   Web of Science ®Google Scholar
• Z. M. Lin and L. B. Wang, A Multi-Domain Coupled Numerical Method for a Flat Tube Bank Fin Heat Exchanger with Delta-Winglet Vortex, Numer. Heat Transfer, Part A: Appl., vol. 65, no. 12, pp. 1024–1229, 2014.
   Web of Science ®Google Scholar
• P. V. S. S. Srivatsa, R. Baby, and C. Balaji, Numerical Investigation of PCM Based Heat Sinks with Embedded Metal Foam/Crossed Plate Fins, Numer. Heat Transfer, Part A: Appl., vol. 66, no. 10, pp. 1131–1153, 2014.
   Web of Science ®Google Scholar
• C. H. Huang and Y. L. Chung, An Inverse Design Problem of Estimating the Optimal Shape of Annular Fins Adhered to a Bare Tube of an Evaporator, Numer. Heat Transfer, Part A: Appl., vol. 66, no. 11, pp. 1195–1217, 2014.
   Web of Science ®Google Scholar
• X. Y. Xu, Q. W. Wang, L. Li, S. V. Ekkad, and T. Ma, Thermal-Hydraulic Performance of Different Discontinuous Fins Used in a Printed Circuit Heat Exchanger for Supercritical CO2, Numer. Heat Transfer, Part A: Appl., vol. 66, no. 10, pp. 1067–1086, 2015.
   Web of Science ®Google Scholar
• Y. Sun, J. Ma, B. Li, and Z. Guo, Prediction of Nonlinear Heat Transfer in a Convective-Radiative Fin with Temperature-Dependent Properties by the Collocation Spectral Method, Numer. Heat Transfer, Part B: Fundam., vol. 69, no. 1, pp. 68–83, 2016.
   Web of Science ®Google Scholar
• L. Luo, C. Wang, L. Wang, B. Sunden, and S. Wang, Heat Transfer, and Friction Factor Performance in a Pin Fin Wedge Duct with Different Dimple Arrangements, Numer. Heat Transfer, Part A: Appl., vol. 69, no. 2, pp. 209–226, 2016.
   Web of Science ®Google Scholar
• S. Q. Lin, T. M. Shih, R. Ru-Gin Chang, and Z. Chen, Optimization of Cooling Effects with Fins of variable Cross-Sections, Numer. Heat Transfer, Part A: Appl., vol. 69, no. 8, pp. 850–858, 2016.
   Web of Science ®Google Scholar
• Y. Lin and C. K. Chen, Annular Hyperbolic Profile Fins with Variable Thermal Conductivity Using Differential Transform and Double-Decomposition Methods, Numer. Heat Transfer, Part A: Appl., vol. 69, no. 3, pp. 327–333, 2016.
   Web of Science ®Google Scholar
• W. Li, J. Ren, J. Hongde, Y. Luan, and P. Ligrani, Assessment of Six Turbulence models for Modeling, and Predicting Narrow Passage Flows, Part 2: Pin Fin Arrays, Numer. Heat Transfer, Part A: Appl., vol. 69, no. 5, pp. 445–463, 2016.
   Web of Science ®Google Scholar
• A. Bhattacharya, V. V. Calmidi, and R. L. Mahajan, Thermophysical Properties of High Porosity Metal Foams, Int. J. Heat Mass Transfer, vol. 45, pp. 1017–1031, 2002.
   Web of Science ®Google Scholar
• V. V. Calmidi and R. L. Mahajan, Forced Convection in High Porosity Metal Foams, ASME J. Heat Transfer, vol. 122, pp. 557–565, 2000.
   Web of Science ®Google Scholar
• S. V. Patankar, Numerical Heat Transfer and Fluid Flow, McGraw-Hill, New York, 1980.
   Google Scholar
• G. Wang, G. Zhao, H. Li, and Y. Guan, Research on Optimization Design of the Heating/Cooling Channels for Rapid Heat Cycle Molding Based on Response Surface Methodology and Constrained Particle Swarm Optimization, Expert Systems with Applications, 2010.
   PubMed Web of Science ®Google Scholar
• G. E.P. Box and N. R. Draper, Empirical Model-Building and Response Surface, John Wiley and Sons, Inc., New York, USA. 1987.
   Google Scholar
• MATLAB User Manual, Version 6.5 Release 13, The MathWorks, Inc. 2002.
   Google Scholar