Effects of the layout of film holes near the vane leading edge on the endwall cooling and phantom cooling of the vane suction side surface

References

• J. C. Han, S. Dutta, and S. Ekkad, Gas Turbine Heat Transfer and Cooling Technology, 2nd ed., Taylor & Francis Group CRC Press, New York, NY, 2012.
   Google Scholar
• J. C. Han, S. Dutta, and S. V. Ekkad, Gas Turbine Heat Transfer and Cooling Technology, Taylor & Francis Group CRC Press, New York, NY, 2000.
   Google Scholar
• M. K. Chyu, Heat Transfer Near Turbine Nozzle Endwall, Ann. N. Y. Acad. Sci., vol. 93, pp. 427–436, 2001.
   Google Scholar
• T. W. Simon and J. D. Piggush, Turbine Endwall Aerodynamics and Heat Transfer, AIAA J., vol. 22, pp. 249–270, 2006.
   Google Scholar
• R. S. Bunker, A Review of Shaped Hole Turbine Film-Cooling Technology, ASME J. Heat Transfer, vol. 127, pp. 441–453, 2005.
   Web of Science ®Google Scholar
• M. Gritsch, A. Schulz, and S. Wittig, Adiabatic Wall Effectiveness Measurements of Film-Cooling Holes with Divergent Exits, ASME Turbo Expo, Orlando, 97-GT-164, 1997.
   Google Scholar
• R. S. Bunker, Film Cooling Effectiveness Due to Discrete Holes within a Transverse Surface Slot, ASME Paper No. GT2002–30178, 2002.
   Google Scholar
• K. D. Lee and K. Y. Kim, Film Cooling Performance of Cylindrical Holes Embedded in a Transverse Trench, Numer. Heat Trans. A, vol. 65, pp. 127–143, 2014.
   Web of Science ®Google Scholar
• E. Kianpour, N. A. C. Sidik, and I. Golshokouh, Measurement of Film Effectiveness for Cylindrical and Row Trenched Cooling Holes at Different Blowing Ratios, Numer. Heat Trans. A, vol. 66, pp. 1154–1171, 2014.
   Web of Science ®Google Scholar
• I. Cresci, P. T. Ireland, M. Bacic, I. Tibbott, and A. Rawlinson, Velocity and Turbulence Intensity Profiles Downstream of a Long Reach Endwall Double Row of Film Cooling Holes in a Gas Turbine Combustor Representative Environment, ASME Turbo Expo, Montreal, GT2015–42307, 2015.
   Google Scholar
• K. Takeishi, M. Matsuura, S. Aoki, and T. Sato, An Experimental Study of Heat Transfer and Film Cooling on Low Aspect Ratio Turbine Nozzles, ASME J. Turbomach., vol. 112, pp. 488–496, 1990.
   Web of Science ®Google Scholar
• S. Friedrichs, H. P. Hodson, and W. N. Dawes, Distribution of Film-Cooling Effectiveness on a Turbine Endwall Measured Using the Ammonia and Diazo Technique, ASME J. Turbomach., vol. 118, pp. 613–621, 1996.
   Web of Science ®Google Scholar
• S. Friedrichs, H. P. Hodson, and W. N. Dawes, Aerodynamic Aspects of Endwall Film-Cooling, ASME J. Turbomach., vol. 119, pp. 786–793, 1997.
   Web of Science ®Google Scholar
• S. Friedrichs, H. P. Hodson, and W. N. Dawes, The Design of an Improved Endwall Film-Cooling Configuration, ASME J. Turbomach., vol. 121, pp. 772–780, 1999.
   Web of Science ®Google Scholar
• D. K. Knost and K. A. Thole, Computational Predictions of Endwall Film-Cooling for a First Stage Vane, ASME Turbo Expo, Atlanta, GT-2003–38252, 2003.
   Google Scholar
• M. F. Blair, An Experimental Study of Heat Transfer and Film Cooling on Large-Scale Turbine Endwalls, ASME J. Heat Transfer, vol. 96, pp. 524–529, 1974.
   Web of Science ®Google Scholar
• H. Pasinato, K. Squires, and R. P. Roy, Measurements and Modeling of the Flow and Heat Transfer in a Contoured Vaneendwall Passage, Int. J. Heat Mass Transfer, vol. 47, pp. 5685–5702, 2004.
   Web of Science ®Google Scholar
• D. G. Knost and K. A. Thole, Adiabatic Effectiveness Measurements of Endwall Film-Cooling for a First Stage Vane, ASME J. Turbomach., vol. 127, pp. 297–305, 2005.
   Web of Science ®Google Scholar
• M. Nicklas, Film-Cooled Turbine Endwall in a Transonic Flow Field: Part II–Heat Transfer and Film-Cooling Effectiveness Measurements, ASME Turbo Expo, New Orleans, GT-2001–0146, 2001.
   Google Scholar
• K. A. Thole and D. G. Knost, Heat Transfer and Film-Cooling for the Endwall of a First Stage Turbine Vane, Int. J. Heat Mass Transfer, vol. 48, pp. 5255–5269, 2005.
   Web of Science ®Google Scholar
• N. Sundaram and K. A. Thole, Film-Cooling Flowfields with Trenched Holes on an Endwall, ASME J. Turbomach., vol. 131, pp. 041007, 2009.
   Web of Science ®Google Scholar
• K. Du and J. Li, Numerical Study on the Effects of Slot Injection Configuration and Endwall Alignment Mode on the Film Cooling Performance of Vane Endwall, Int. J. Heat Mass Transfer, vol. 98, pp. 768–777, 2016.
   Web of Science ®Google Scholar
• K. F. Milidonis and D. P. Georgiou, Film Cooling Effectiveness in the Region of the Blade-Endwall Corner Junction with the Injection Assisted by the Recirculating Vortex Flow, Int. J. Heat Mass Transfer, vol. 83, pp. 294–306, 2015.
   Web of Science ®Google Scholar
• K. Du, Z. Li, and J. Li, Effects of the Leading Edge Injection Slot on the Film Cooling and Heat Transfer Performance of the Vane Endwall, Int. J. Heat Mass Transfer., vol. 102, pp. 1308–1320, 2016.
   Web of Science ®Google Scholar
• R. J. Roback, R. P. Dring, and H. Streak, Phantom Cooling in a Turbine Rotor Passage: Part 1-Separate Effects, ASME J. Turbomach., vol. 115, pp. 657–666, 1993.
   Web of Science ®Google Scholar
• R. J. Roback, R. P. Dring, and H. Streak, And Phantom Cooling in a Turbine Rotor Passage: Part 2-Combined Effects and Analytical Modeling, ASME J. Turbomach., vol. 115, pp. 667–674, 1993.
   Web of Science ®Google Scholar
• Y. Zhang and X. Yuan, Experimental Investigation of Turbine Phantom Cooling on Suction Side with Combustor Turbine Leakage Gap Flow and Endwall Film Cooling, ASME Turbo Expo, Copenhagen, GT2012–69295, 2012.
   Google Scholar
• L. Zhang, J. Yin, and H. K. Moon, The Effects of Vane Showerhead Injection Angle and Film Compound Angle on Nozzle Endwall Cooling (Phantom Cooling), ASME J. Turbomach., vol. 137, pp. 021003, 2015.
   Web of Science ®Google Scholar