References
- J. Chakraborty, N. Verma, and R. P. Chhabra, Wall Effects in Flow Past a Circular Cylinder in a Plane Channel: A Numerical Study, Chem. Eng. Process., vol. 43, pp. 1529–1537, 2004. doi:10.1016/j.cep.2004.02.004
- A. K. Dhiman, N. Anjaiah, R. P. Chhabra, and V. Eswaran, Mixed Convection from a Heated Square Cylinder to Newtonian and Power-Law Fluids, J. Fluid Eng., vol. 129, pp. 506–513, 2007. doi:10.1115/1.2436586.
- X. Chen, P. Yu, S. H. Winoto, and H. T. Low, Numerical Analysis for the Flow Past a Porous Square Cylinder Based on the Stress-Jump Interfacial-Conditions, Int. J. Numer Meth. Heat Flow, vol. 18, pp. 635–655, 2008. doi:10.1108/09615530810879756
- N. Nirmalkar, R. P. Chhabra, and R. J. Poole, Laminar Forced Convection Heat Transfer from a Heated Square Cylinder in a Bingham Plastic Fluid, Int. J. Heat Mass Transfer, vol. 56, pp. 625–639, 2013. doi:10.1016/j.ijheatmasstransfer.2012.08.049
- A. Sharma and V. Eswaran, Heat and Fluid Flow across a Square Cylinder in the Two-Dimensional Laminar Flow Regime, Numer. Heat Transfer A, vol. 45, pp. 247–269, 2004. doi:10.1080/10407780490278562
- P. K. Rao, A. K. Sahu, and R. P. Chhabra, Momentum and Heat Transfer from a Square Cylinder in Power-Law Fluids, Int. J. Heat Mass Transfer, vol. 54, pp. 390–403, 2011. doi:10.1016/j.ijheatmasstransfer.2010.09.032
- S. Bhattacharyya and S. Dhinakaran, Vortex Shedding in Shear Flow Past Tandem Square Cylinders in the Vicinity of a Plane Wall, J. Fluid. Struct., vol. 24, pp. 400–417, 2008. doi:10.1016/j.jfluidstructs.2007.09.002
- A. K. Dhiman, Heat Transfer to Power-Law Dilatant Fluids in a Channel with a Built-in Square Cylinder, Int. J. Therm. Sci., vol. 48, pp. 1552–1563, 2009. doi:10.1016/j.ijthermalsci.2008.12.013
- A. K. Dhiman, R. P. Chhabra, and V. Eswaran, Flow and Heat Transfer Across a Confined Square Cylinder in the Steady Flow Regime: Effect of Peclet Number, Int. J. Heat Mass Transfer, vol. 48, pp. 4598–4614, 2005. doi:10.1016/j.ijheatmasstransfer.2005.04.033
- A. K. Dhiman, R. P. Chhabra, and V. Eswaran, Steady Flow Across a Confined Square Cylinder: Effects of Power-Law Index and Blockage Ratio, J. Non-Newton. Fluid, vol. 148, pp. 141–150, 2008. doi:10.1016/j.jnnfm.2007.04.010
- S. Malekzadeh and A. Sohankar, Reduction of Fluid Forces and Heat Transfer on a Square Cylinder in a Laminar Flow Regime using a Control Plate, Int. J. Heat Fluid Flow, vol. 34, pp. 15–27, 2012. doi:10.1016/j.ijheatfluidflow.2011.12.008
- M. A. Moussaoui, M. Jami, A. Mezrhab, and H. Naji, MRT-Lattice Boltzmann Simulation of Forced Convection in a Plane Channel with an Inclined Square Cylinder, Int. J. Therm. Sci., vol. 49, pp. 131–142, 2010. doi:10.1016/j.ijthermalsci.2009.06.009
- A. Sohankar, C. Norbergb, and L. Davidson, Numerical Simulation of Unsteady Low-Reynolds Number Flow Around Rectangular Cylinders at Incidence, J. Wind Eng. Ind. Aerodyn., vol. 69, pp. 189–201, 1997. doi:10.1016/S0167-6105(97)00154-2
- C. S. Song and S. O. Park, Numerical Simulation of Flow Past a Square Cylinder using Partially-Averaged Navier–Stokes Model, J. Wind Eng. Ind. Aerodyn., vol. 97, pp. 37–47, 2009. doi:10.1016/j.jweia.2008.11.004
- S. Turki, H. Abbassi, and S. B. Nasrallah, Two-Dimensional Laminar Fluid Flow and Heat Transfer in a Channel with a Built-in Heated Square Cylinder, Int. J. Therm. Sci., vol. 42, pp. 1105–1113, 2009. doi:10.1016/S1290-0729(03)00091-7
- K. Murugesan, H. N. Suresh, K. N. Seetharamu, P. A. Narayana, and T. Sundararajan, A Theoretical Model of Brick Drying as a Conjugate Problem, Int. J. Heat Mass Transfer, vol. 44, pp. 4075–4086, 2001. doi:10.1016/S0017-9310(01)00065-5
- C. Lamnatou, E. Papanicolaou, V. Belessiotis, and N. Kyriakis, Conjugate Heat and Mass Transfer from a Drying Rectangular Cylinder in Confined Air Flow, Numer. Heat Transfer A, vol. 56, pp. 379–405, 2009. doi:10.1080/10407780903244353
- L. S. Oliveira and K. Haghighi, Conjugate Heat and Mass Transfer in Convective Drying of Porous Media, Numer. Heat Tranfer A, vol. 34, pp. 105–117, 1998. doi:10.1080/10407789808913980
- H. N. Suresh, P. A. Narayana, and K. N. Seetharamu, Conjugate Mixed Convection Heat and Mass Transfer in Brick Drying, Heat Mass Transfer, vol. 37, pp. 205–213, 2001. doi:10.1007/s002310000086
- E. K. Akpinar and I. Dincer, Application of Moisture Transfer Models to Solids Drying, Proc. Inst. Mech. Eng. A, vol. 219, pp. 235–244, 2005. doi:10.1243/095765005x7538
- A. Kaya, O. Aydin, and I. Dincer, Numerical Modeling of Forced-Convection Drying of Cylindrical Moist Objects, Numer. Heat Transfer A, vol. 51, pp. 843–854, 2007. doi:10.1080/10407780601112753
- P. G. Ganesan and P. H. Rani, Unsteady Free Convection MHD Flow Past a Vertical Cylinder with Heat and Mass Transfer, Int. J. Therm. Sci., vol. 39, pp. 265–272, 2000. doi:10.1016/S1290-0729(00)00244-1
- I. Dincer and M. M. Hussain, Development of a New Bi–Di Correlation for Solids Drying, Int. J. Heat Mass Transfer, vol. 45, pp. 3065–3069, 2002. doi:10.1016/S0017-9310(02)00031-5
- A. Kaya, O. Aydın, and I. Dincer, Heat and Mass Transfer Modeling of Recirculating Flows during Air Drying of Moist Objects for Various Dryer Configurations, Numer. Heat Transfer A, vol. 53, pp. 18–34, 2007. doi:10.1080/10407780701557899
- A. Kaya, O. Aydın, and I. Dincer, Numerical Modeling of Heat and Mass Transfer during Forced Convection Drying of Rectangular Moist Objects, Int. J. Heat Mass Transfer, vol. 49, pp. 3094–3103, 2006. doi:10.1016/j.ijheatmasstransfer.2006.01.043
- ANSYS CFX, User Manual, ANSYS, Canonsburg, PA, USA, 2005.
- F. P. Incropera and D. P. de Witt, Fundamentals of Heat and Mass Transfer, John Wiley & Sons, New York, USA, 1990.